MDT Oryx Chassis

#251
My Oryx chassis showed up and I dropped in my Vudoo V22 to try it out. Took all of about 1 minute to install. I installed an Arca rail on the bottom, a direct mount for my tripod. I ran out of M Lok bolts so I used 1/4 in stainless bolt with a nylock nut. The nut fits inside the forend perfectly and holds the nut in place, no wrench required. I found the new grip to be very comfortable and is similar to an Ergo grip. A quick range trip to test it out and my Vudoo shoots great in the new chassis. I really like the ergos and design. The advantage of the plastic panels is apparent in the cold as it was right at the freezing temp.. The forend has a pre threaded 10x32 hole on the bottom and I installed a sling swivel to attach my bipod to. I'm also running a Tikka t3 in my 2nd Oryx chassis I had ordered and I really like it. I have used the MDT ESS chassis for several years now and I have tried the MDT LSS XL Gen2, but for the price point features and design, you can't beat the Oryx. It is going to be a big seller for Oryx/MDT!!. I'm going to get a couple more!!

Ed

20190221_184417.jpg


20190226_124802.jpg

20190226_100522.jpg


20190226_100557.jpg
 
Last edited:
  • Like
Reactions: WeeHooker, geek65, TACC and 7 others
#252
bobke said:
Still looking for a left hand short action-is it simpler on the manufacturing side to modify for all of the different RH action inlets than set up for 2-3 highest volume LH actions? Seems to leave a pretty reasonable market segment without an option till all of the RH actions have been completed. Pressing a bit because I’d like a get a LH Rem700 SA soon as available, which appears to be six months out from list above.
Click to expand...

Thanks for your interest in our products and I wish I had better news for you! The tricky thing with the Oryx in LH is that we have specific polymer side panels that were only made for RH actions to begin with. We may be able to modify the mold that does them, but then that would cause a huge backlog in RH chassis availability. The other option would be for us to create a brand new mold for LH side polymer, but the investment may not be offset by the amount of LH chassis that we would have to run to pay it back.

The absolute best way to see a LH chassis made in the future is to request it here: https://oryxchassis.zendesk.com/hc/en-us/requests/new. Without the requests, we can't really justify doing it :(

Also, thanks @ed99 for the kind words and review :)
 
  • Like
Reactions: MR.TJW
#256
MDT_Josh said:
No, unfortunately the inside of the forend is different and there is no m-lok on the sides.

The outside weights will fit the LSS-XL Gen2, ESS, Tac21 and LSS Gen2 however :D
Click to expand...

Conceivably you could put some of the M-lok weights on the bottom. May not be the slickest solution though.
 
#266
DaleGribble82 said:
Disregard, I saw the CZ 455 listed as of May of 2019. Are there any talks of a possible chassis for 10/22 or 10/22 style receivers in the future?
Click to expand...

Yes, we're on track to have a few more CZ 455 inlets available soon, and no word on the 10/22 style receivers just yet. We are always looking to provide what people want, and if there is enough request, we may be able to do an Oryx 10/22?
 
  • Like
Reactions: MR.TJW, RandomWAguy, EscapeVelocity and 1 other person
#278
How are things looking for april 19 shipping for L/A Savage really got my fingers crossed.This chassis looks great and at a decent price! how about defferent color options in april.
Thanks Rick
 
#289
LtDan47 said:
Tried to order a chassis tonight and no go with Win 10 Edge, then tried Chrome got all the way to place order and button didn't work, I guess I talked myself out of it after that
Click to expand...

I also had issues but I finally got my chassis and am very pleased. Would recommend giving it another go
 
#290
Got an email from Oryx saying I could call them, then I got to thinking I wanted to use this on a 6.5 G Ruger Predator the chassis is set up for 308 mag length and that is a problem for feeding the shorter case. So I will pass for now. Primal Rights make a short case adapter for the metal AICS mags but I understand that the Oryx uses the polymer mags.
 
#292
LtDan47 said:
Got an email from Oryx saying I could call them, then I got to thinking I wanted to use this on a 6.5 G Ruger Predator the chassis is set up for 308 mag length and that is a problem for feeding the shorter case. So I will pass for now. Primal Rights make a short case adapter for the metal AICS mags but I understand that the Oryx uses the polymer mags.
Click to expand...

You're able to use the metal magazines in the Ruger American Oryx chassis :) If you were to go with the Primal Rights kit and get the rounds to feed out of a 308 metal magazine, that mag would adapt just fine into the Oryx.
 
#293
MDT_Josh said:
You're able to use the metal magazines in the Ruger American Oryx chassis :) If you were to go with the Primal Rights kit and get the rounds to feed out of a 308 metal magazine, that mag would adapt just fine into the Oryx.
Click to expand...
I know the earlier models of mdt (and everyone elses too) ruger american chassis didnt play well with 300 black out and 223 rounds (rotary mag model in particular). Does the oryx or is it still a bad combination for the small sized cases?
 
Last edited:
#294
spife7980 said:
I know the earlier models of mdt (and everyone elses too) ruger american chassis didnt play well with 300 black out and 223 rounds (rotary mag model in particular). Does the oryx or is it still a bad combination for the small sized cases?
Click to expand...

Nope, that is still an issue and there was only one magazine (made by Accurate Mag for the Ruger Scout Rifle) that would solve the 223 Rem feeding. With the 6.5 Grendel, what I am saying is that; if you're able to get it to feed out of a metal AICS magazine with a spacer kit, then it will work in our chassis too :)
 
#295
MDT_Josh said:
Nope, that is still an issue and there was only one magazine (made by Accurate Mag for the Ruger Scout Rifle) that would solve the 223 Rem feeding. With the 6.5 Grendel, what I am saying is that; if you're able to get it to feed out of a metal AICS magazine with a spacer kit, then it will work in our chassis too :)
Click to expand...
Damn. Im still trying to find something I can put my .382 bolt face american into before I rebarrel it. Cant really fit a med palma in the factory stock lol

I should just sell the thing and stop fretting over it.
 
#298
Grip was the first thing I thought I would need before the Oryx arrived.
Grip is GTG for me.
Nice palm swell, feels great and there is a thumb shelf on the chassis.
I have an MDT vertical on another chassis and see no reason to change the Oryx's grip.
I think it will be an individual's preference deal ; I have a box full of grip candidates that failed selection on a variety of rifles.
 
  • Like
Reactions: Pilotscrappy
You must log in or register to reply here.

Similar threads

C
Accessories WTS/WTT LA MDT Oryx chassis
Replies
2
Views
182
Cmiller5
C
I
SOLD MDT Oryx Tikka T3x S/A Chassis
Replies
0
Views
122
IronOperator87
I
NearSighted25
MDT Oryx - Weight adding options
Replies
21
Views
411
NearSighted25
NearSighted25
6
SOLD FS Two MDT Oryx Chassis for Remington 700 SA
Replies
1
Views
289
6BR_Sniper
6
mmlook
Accessories MDT ACC Premier Gen 2 R700 SA & CZ457 RH, ACC Elite, Oryx R700 & 10/22, Peanuts
Replies
14
Views
1K
mmlook
mmlook
Top Bottom
Back
Home
Forums
Merch
Alerts