Maggie’s Motivational Pic Thread v2.0 - - New Rules - See Post #1

[GBMaryland]

Probably not something to brag about on open forums...

The guy purposely cut me off and slammed on his brakes, and I was just driving down the highway. Literally minding my own business and not doing anything crazy or bad or asinine.

It simply appears that he had a problem with EVs, and to this day I have no idea what bug was up his ass.

He didn’t react well to me stepping on the gas and getting away from him…

But apparently, he also didn’t know how to drive… and wasn’t paying attention to the road…

I’m not gonna apologize for watching a jackass drive into to the barrier because he wasn’t paying attention and assumed his piece of shit was going to be OK at a high rate of speed.

Kinda like God decided to solve the problem for me…

 

[168BTHPM]

Just about have my race rig setup. This should keep it from diving in the corners.

 

[Threadcutter308]

Just about have my race rig setup. This should keep it from diving in the corners.

View attachment 8340903

Noice Stick Job

Oh, and about yer "brakes"........

 

[TripleBull]

 

[Bullfrog08]

But Mike,
This one is so much neater.

View attachment 8340759


View attachment 8340768

NEC 300.3(B)(1)
Conductors shall be permitted to be run in parallel in accordance with the provisions of 310.10(H). The requirement to run all circuit conductors within the same raceway, auxiliary gutter, cable tray, trench, cable, or cord shall apply separately to each portion of the paralleled installation, and the equipment grounding conductors shall comply with the provisions of 250.122.

 

[OkieMike]

But Mike,
This one is so much neater.

View attachment 8340759


View attachment 8340768

Nice tidy work.....except for that ground.....that looks like a bag of assholes.

Wasn't my work.

The customer had a failure on the primary side... I just opened the xfmr and cleaned out all the dirt and cobwebs, checked connections, etc...

The date on the fuses in the MV switch feeding the primary side of the xfmr was February of '89. The switch itself said November '88 on the tag.

Neither the switch or the xfmr looked like they had been cleaned/PM'ed in 35 years. In fact, the chain on the throw handle of the switch was rusted and broken. We had to call the utility to pull the cutouts because we couldn't shut it off.

You can't see it in the picture but there was oil leaking out around the X2 and X3 bushings on the secondary, and around the H3 bushing on the primary.

There was a whole list of shit wrong. We cobbled it back together to get them up and going and sent a list to the boss. He's going to break it down line item style and give them a quote to get everything back to ship shape.

Mike

Primary side pic to satisfy the rules. It's just a "temporary" band-aid to keep the lights burning and motors turning... We'll see if they actually follow through or let it go until the damn thing burns down.

 

[912173]

View attachment 8339994

heavy flak on the way to work? Lol.

 

[168BTHPM]

Noice Stick Job

Oh, and about yer "brakes"........

Brakes are for sissies.

 

[WaywardSon]

 

[kd185]

Wasn't my work.

The customer had a failure on the primary side... I just opened the xfmr and cleaned out all the dirt and cobwebs, checked connections, etc...

The date on the fuses in the MV switch feeding the primary side of the xfmr was February of '89. The switch itself said November '88 on the tag.

Neither the switch or the xfmr looked like they had been cleaned/PM'ed in 35 years. In fact, the chain on the throw handle of the switch was rusted and broken. We had to call the utility to pull the cutouts because we couldn't shut it off.

You can't see it in the picture but there was oil leaking out around the X2 and X3 bushings on the secondary, and around the H3 bushing on the primary.

There was a whole list of shit wrong. We cobbled it back together to get them up and going and sent a list to the boss. He's going to break it down line item style and give them a quote to get everything back to ship shape.

Mike

Primary side pic to satisfy the rules. It's just a "temporary" band-aid to keep the lights burning and motors turning... We'll see if they actually follow through or let it go until the damn thing burns down.

View attachment 8340925

dont most pad mounts leak if there over 20 years old (especially when there over heating like in July)
ive seen bucket inside of them to catch the mineral oil leaking

 

[jmp1]

Wasn't my work.

The customer had a failure on the primary side... I just opened the xfmr and cleaned out all the dirt and cobwebs, checked connections, etc...

The date on the fuses in the MV switch feeding the primary side of the xfmr was February of '89. The switch itself said November '88 on the tag.

Neither the switch or the xfmr looked like they had been cleaned/PM'ed in 35 years. In fact, the chain on the throw handle of the switch was rusted and broken. We had to call the utility to pull the cutouts because we couldn't shut it off.

You can't see it in the picture but there was oil leaking out around the X2 and X3 bushings on the secondary, and around the H3 bushing on the primary.

There was a whole list of shit wrong. We cobbled it back together to get them up and going and sent a list to the boss. He's going to break it down line item style and give them a quote to get everything back to ship shape.

Mike

Primary side pic to satisfy the rules. It's just a "temporary" band-aid to keep the lights burning and motors turning... We'll see if they actually follow through or let it go until the damn thing burns down.

View attachment 8340925

What primary voltage?? The stress cones look old af. Those "extensions " are fancy. Got to make it work.

 

[Shifty_One]

one of my favorites

View attachment 8340511

 

[BurtG]

 

[Bandit320]

Cooper is probably all over that.

 

[168BTHPM]

 

[168BTHPM]

 

[aprocast]

View attachment 8341066

Learn what?

 

[timesublime]

 

[diggler1833]

Learn what?

About reciprocating charging handles...unless you were making a joke yourself.

 

[timesublime]

 

[Charlie112]

Just about have my race rig setup. This should keep it from diving in the corners.

View attachment 8340903

That’s some dam good welding!!!

 

[OkieMike]

What primary voltage?? The stress cones look old af. Those "extensions " are fancy. Got to make it work.

13,200 based on the load tap changer setting.

Yeah they were pretty tracked up. Worst I've seen.The pieces of bus replaced some jumpers. The way it was originally set up was the feeders came in and hit some old MOV surge arrestors with jumpers going up to the primary bushings.

The customer/utility had added the newer arrestors up on the pole at some point. So the boss said to yank those old porcelain MOV arrestors since they tend to explode like a grenade when they fail.

We also changed out a failed fuse in the switch... That sucker was $3k

Mike

 

[OkieMike]

dont most pad mounts leak if there over 20 years old (especially when there over heating like in July)
ive seen bucket inside of them to catch the mineral oil leaking

Probably. I don't mess with old ones much. Mostly hook them up on new installs. The little gasket between the paddles and the porcelain on the bushings looked pretty sketchy... We actually touched/jostled them as little as possible. It just looked like one of those deals where the more stuff you touched the more it would fall apart.

Mike

 

[OkieMike]

About reciprocating charging handles...unless you were making a joke yourself.

Is there some kind of advantage to a recip charge handles that I'm not aware of?

I keep seeing setups with them and I just think, "Do you not need skin on certain parts of your hand?"

Mike

 

[BurtG]

Is there some kind of advantage to a recip charge handles that I'm not aware of?

I keep seeing setups with them and I just think, "Do you not need skin on certain parts of your hand?"

Mike

They can be a FA

 

[Pandelerium1138]

View attachment 8340415

That's going to leave a snail trail on the seat...

 

[timesublime]

 

[Pandelerium1138]

Not enough tongue weight, shoulda pulled that car a little further forward on the trailer.

 

[168BTHPM]

 

[Jefe's Dope]

 

[168BTHPM]

 

[Jefe's Dope]

 

[lash]

View attachment 8341240

MILF Sunday?

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[BG94591]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[Jefe's Dope]

 

[CamW]

 

[CamW]

 

[Jefe's Dope]

 

[CamW]

 

[Jefe's Dope]