New guy with a new gun!

Hdgasser

Private
Full Member
Minuteman
Feb 23, 2013
13
0
SoCal LBC
Well I thought I'd take the time to introduce my first bolt gun and it's short evolution!

Towards the end of 2012 I was finally able to shoot my first decent long range .308 bolt gun, a 26" PSS r700... After a few shots I thought I was the coolest kid on the block cause i was banging steel at almost 500yds. At that point in time I knew I was hooked/screwed.

10 days later I was on my way to pick up my new 20" sps, couple days later I slapped on a Nikon buckmaster and a bipod and off to the desert we went!

66481970-9D26-47E7-8260-1A41C3CCA3A7-1433-0000005DC44C39B6.jpg


23DC6524-2025-49E1-9453-32D525990427-21329-0000012C677ECAC9.jpg


While I had shitons of fun, I got bored pretty quickly "Boom........BING"... After a couple trips I decided it was time for some "upgrades" to see how far I can reach out and how accurate I can be.

First orderes were to dump that cheap flimsy Houge stock. Found a nice used B&C in OD.

37A9FF8D-428A-490C-B048-8963D30E71B9-109-00000054A5902732.jpg

9AB06075-5ED7-4180-BF75-3CA299E3BC6A-109-00000053BD376877.jpg


And that's where it all went down hill... New stock? Why not look into some better glass?? Those SWFA SS's sure are purdy!! So then came the Illuminated 5-20x50 SS, cat tail, sunshade and BC caps. Needed some new mounts of course so I opted for a Seekins 20moa rail and NF ultralight rings!

WooHoo!!
67C5F5F1-7F2D-46B2-86BC-C0951ED621C6-16674-000002D63AB32661.jpg

44703887-A97E-4E5F-AB96-384967F227D4-16674-000002D63402730E.jpg


Sexy huh!!

Well then I started considering a DBM... Few hundy for a nice bottom metal, couple more bucks for inletting.... Ya know for a few more $$$ you can get a nice Mcree that's ready to go!! Yup, sure can! And it just so happened I came here and BAM it was ment to be cause as soon as I opened the forsale section there it was!

My beautiful Mcree/Swfa/NF/Seekins r700

FF397C6F-9DC6-4C21-A45F-51530F04A015-21329-0000012D0615217B.jpg

45E23646-5851-4ED1-8891-8719746A7A1D-21329-0000012D11FCE611.jpg

8CCAE047-4B35-4F22-AD35-D6525D61DB3A-21329-0000012D0C9546F4.jpg


I still have a few minor things in gonna do, including a new knob and fluted bolt, threading the barrel, and putting some color on the barrel and action. But for now I am extremely happy!! Can't wait to get behind this Mcree and SS!

Lemme know what you think!! Or what I should do next besides shoot it! :)
 
Honestly, shoot the barrel out. Then get the action trued and a barrel put on. During that time if you want the smith to put on the bolt handle do so or check KRG bolt lift.
 
Onoko that is the plan! I plan on shooting the piss out of it the next few months before it gets too hot.

Vkc my buddy's pss has a NF on it, and for the $$$ ill take the swfa and spend the left overs $$$ on ammo.

Even when he looked thru it he said "DAMN, how much was this thing?!" :)