And I can actually zoom in and see the one screw that I had tightened down while the others protrude..definitely felt like a dumbass
-
Having trouble using the site?
Contact support
New Rifle: Seekins Havak HIT
- Thread starter SkyScrapin
- Start date
Reading this reminded me something I'd forgotten, one of those "almost a great group" pics was caused by me reached over the rifle with my off hand moved both the windage and elevatioin adjustment without realizing it. (Doh) Only noticed it after the second shot. I didn't remember that till just now, so that cheered me up a tiny bit. lol
It has capped turrets that turn easy, I need to break my old habits with this one.
It has capped turrets that turn easy, I need to break my old habits with this one.
Went out to a friends place and put the first rounds down the barrel of my HIT this am. I will be happy to end up around 2950 with this bullet. After another 100 rounds or so it should get there. Only shot at 100 today to get it on paper and see what my numbers were, plan to stretch it out further soon. Looks like the potential is there for a sub 1/2” gun. Other than the sighters they are all three shot groups. Considering that I picked a random powder charge and went with book OAL I’m pretty happy.
6 Creed
Lapua brass
CCI 450
39.0 grains H4350
108 eldm seated to book OAL
6 Creed
Lapua brass
CCI 450
39.0 grains H4350
108 eldm seated to book OAL
What height mount is that to accomodate a 56mm objective on that Razor? Looks like there might be a bit of room to get away with a little lower of a mount to get the scope axis closer to the barrel axis?
Trying to plan ahead a bit and figure out what height mounts may work before my Hit Pro arrives.
anybody getting their hit? Got some new pictures? Shots etc? And how does it compare Zeus action or a defiance action?
from Seekins via email list:
As of August First we will be temporarily be shutting off all direct to customer firearm sales. |
| To our valued customers: Our customers are our #1 priority. You always have been, and we actively maintain a culture that protects that, because we know if we fail to recognize that, the show’s over. Due to a substantial increase in demand for Seekins Precision firearms, we are temporarily not offering firearms for sale directly from our website. This test will check our capacity to produce even more rifles per week, which is far better for our customers. We are striving to fill all orders as quickly as possible, and the entire team has never been more motivated to get our products into your hands. At the same time, we are expanding our dealer network. So if you need assistance locating a Seekins Precision firearm, please email or call us directly to find a dealer! We won’t leave you high and dry. You want our rifles, and we want you to get them…but faster. Our Customer Service team will work with you to locate one of our rifles, so don’t hesitate to reach out. Thank you for choosing Seekins Precision, and Get After It! |
I haven't handled the MDT chassis in question but the hit chassis is fine. The hinge locks up tight and folds over the bolt seamlessly, there's the dust cover which is unique, and adjustments for length of pull and cheek weld are pretty easy. Good implementation of the bag rider so as not to create a snag point. It's about 4.2 lbs from memory. Only downside is the lack of arca integration without paying additional money, which isn't awful.
I'm sure this has been covered-- skimmed through a few pages but didn't notice an answer-- but could have easily skipped it. Will the Hit be offered in LA... or just SA for comps?
If you're running an RRS Anvil, they take Picatinny rails as well as arca. Just attach an MLOK pic rail on the bottom of the HIT in front of the mag well. They might take an extra second or two sometimes to lock down compared to arca, but they hold securely.
It balances no problem.
Barrels can be spun from blanks, which would actually be the best choice. The other stuff really does matter. Now that I own one, I'll say everyone else's rifles are shit.
Not if they require a proprietary barrel extension like a MWS or KAC or a few others.
@verdugo60 - Shot really well - took it out to 980 yds.
Having some issues with the pmag feeding.
Going to try a metal Accurate Mag AICS mag instead.
Having some issues with the pmag feeding.
Going to try a metal Accurate Mag AICS mag instead.
Are more people getting HIT's in? I really want to see this system take off, still doesn't seem like there's a lot of them out there right now.
Was that the PRO version then? I have one on order in 6GT. Did switching mags improve feeding?
Yeah I did order the Hit Pro which comes with the upgraded Timney trigger and the fore end arca rail. Even the
Pro does not come with the NV bridge - it was extra. I also ordered the 6.5 PRC bolt and barrel.
Just got an AI AW mag to try this week and will see how it works this weekend.
Interesting timing. Just spent a while playing with my Magpuls trying to figure out just what's going on. Norma and ELD-Ms (6.5C) work okay most of the time with the 5 rounders, but the Berger VLDH's aren't a fan. When the base of the cartridge clears the feed lips, the case below it kicks the base up in the air and the tip of the bullet dives down and hits the chamber right in the shoulder and the bullet jams.
Both my 5 rounders do this. My 10 rounder does not. It feeds smooth and straight into the chamber.
I've seen people say this before about their 5's vs 10's. When I hold them side by side with a round in them, I swear I can see more of the case in the 5's. Which would make sense with them coming out of the lips sooner. I could just use the 10, but don't really want to deal with that big honking thing sticking out of it all the time. Been trying to decide which mag to order now.
Both my 5 rounders do this. My 10 rounder does not. It feeds smooth and straight into the chamber.
I've seen people say this before about their 5's vs 10's. When I hold them side by side with a round in them, I swear I can see more of the case in the 5's. Which would make sense with them coming out of the lips sooner. I could just use the 10, but don't really want to deal with that big honking thing sticking out of it all the time. Been trying to decide which mag to order now.
Interesting - I only tried the 5rd PMAG that came with the gun - not the 10, but the 5 with 6CM did not work no matter what.
Well I’ll be. I had the 10 round Magpul mag before I even had this rifle, but never used it. I mean I tried it with dummy rounds the other day but never shot with it till today. Shot 50 plus rounds, mostly 3 and 4 shot groups trying different things and fiddling with stuff. Because in reality that’s mostly what I bought it for, fiddling and trying stuff. It was like a totally different rifle, so smooth, no hiccups. All Berger 130gr VLD Hunt’s, which the 5 round mags really didn’t like at all. I shot 16 different groups and all of them were pretty damn good. Like always, some real nice, some almost real nice, some just okay. But across the range of loads I tried, all shot well and no “What the hell happened there?” shots. Don’t know if it was just better shooting because of less fussing with it, or because of better, straighter, consistent OAL cartridges getting into the chamber from NOT getting jammed in the shoulder. All in all it shot better today.
Had my first misfire yesterday. Break the shot and “click”. Stupid rifle won’t even fire rounds with no primer. Jeeze.
If anyone from Seekins still keeps an eye on this thread, I would suggest contracting with a manufacturer and selling stick on pads cut to shape for the cheek riser. The carbon fiber is beautiful, but it was eating me up. Something about the shape of my face I guess, because every day after shooting it my cheek bone area hurt. I bought some stick on comb pads and cut them to something that sort of works and put it on. Problem solved, it's doing the job, but it’s ugly. Cutting that stuff smooth and even isn’t easy. Screwed two up trying get it right. Finally had to settle for “well it’s not totally awful.” But pre cut the right shape would be the berries.
If anyone from Seekins still keeps an eye on this thread, I would suggest contracting with a manufacturer and selling stick on pads cut to shape for the cheek riser. The carbon fiber is beautiful, but it was eating me up. Something about the shape of my face I guess, because every day after shooting it my cheek bone area hurt. I bought some stick on comb pads and cut them to something that sort of works and put it on. Problem solved, it's doing the job, but it’s ugly. Cutting that stuff smooth and even isn’t easy. Screwed two up trying get it right. Finally had to settle for “well it’s not totally awful.” But pre cut the right shape would be the berries.
Anybody look into swapping out the bolt knob yet? Would like to replace it with something chonkier but still be able to fold. I unscrewed it with an allen wrench, but it seems like the bolt handle itself has a male screw rather than the female threads on most aftermarket bolts.
Oh, and +1 for Seekins customer service. They'd smoothed out the bolt itself for me (had been a little sticky in certain positions) and even upgraded my trigger and threw in a muzzle brake for me. Customer for life here.
Does anyone know what the bolt coating is? Here's a couple of pix showing the wear after 150 rounds of 308. It doesn't appear to last very long, whatever it is. Also, anybody know what the bolt and action are made of? It's not really spelled out anywhere on the Seekins site.
That's not right. I'm closing in on 600 rounds and have one little spot at the rear left side of the bolt.
- Mar 6, 2018
- 777
- 184
Anybody have a weight of the action and chassis (no barrel)? Trying to convince myself I could throw a CF barrel on for lighter weight hunting rig.
Orrrrrrrrr...Seekins could just use the new HIT action in a PH2 stock and satisfy us lightweight hunters with cartridge ADHD.
Orrrrrrrrr...Seekins could just use the new HIT action in a PH2 stock and satisfy us lightweight hunters with cartridge ADHD.
Last edited:
Sure thing. My chassis is 4.4 lbs. Action is 2.6 lbs. My rifle was a bit over the advertised weight at 12 lbs even for the non-pro variant. I was doing the same math to see about using it for field events.
+1
I must have been using the wrong size Allen wrench doing magazine height adjustments and I stripped out the screw head. I emailed about getting a replacement screw, they got back to me in 20 minutes saying they would send me a whole assembly. A couple days later I had a brand new latch assembly in hand.
As far as the bolt wear goes, did you clean / lubricate it? I know the factory lube/protectant that mine had on it when I got it was some sticky, tacky (I don't want to say "gritty" put it sure wasn't slippery) feeling stuff.
This is the extent of my bolt wear after 681 rounds and lord knows how many additional cycles.
It's great hearing about a company with such stellar CS. That bolt looks perfectly fine to me.
Look what I spied:
www.eurooptic.com
www.eurooptic.com
Seekins Precision HAVAK HIT Pro .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710171-FDE
Seekins Precision HAVAK HIT Pro .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710171-FDE For Sale
Seekins Precision HAVAK HIT .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710169-FDE
Seekins Precision HAVAK HIT .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710169-FDE For Sale
You had my attention, Now you have my curiosity.Look what I spied:
Seekins Precision HAVAK HIT Pro .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710171-FDE
Seekins Precision HAVAK HIT Pro .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710171-FDE For Sale
Seekins Precision HAVAK HIT .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710169-FDE
Seekins Precision HAVAK HIT .223 Wylde 18" 5/8-24" Bbl Flat Dark Earth Rifle 0011710169-FDE For Sale
I’ve read almost all of the reviews, as I didn’t want to ask a question that had been answered, but can the rear bag rider be removed and a monopod be installed? Didn’t know if there was a way to install a small rail section so I could add a monopod? Haven’t bought one yet but strongly considering ordering one. Sold my axmc a few months back and I love the fact that this thing has the ability to quickly swap barrels.
Got my Havak Hit Pro a few days ago and too it to the indoor range to sight it in, first 30 rounds down the pipe and here are my thoughts. Factory Norma Golden Target Match 143 grain ammo, box showed 2723 fps and I measured 2726 with a SD of 10. Pretty good for factory ammo. Bolt was a bit gritty but has only been cycled about 100 times (mostly dry firing). Hopefully this will smooth out some with use. The magazine, Magpul AICS 5rd, has to be aligned perfectly to get it into the mag well. Not new to shooting, but my first real time behind a quality PRS type bolt action and these are probably the best groups I have shot. Group on left was shot at 10x and on the right at 20x magnification.
Attachments
Yeah. Seems these rifles are shooters. I haven't shot mine since I tested it with factory ammo and it was sub-1/2 within 10 rounds. Gonna try to put more rounds down soon.
Hey everyone, been a bit but I should be on here a little more if ya have questions. We got a bunch of Magpul mags that only feed 308 well so if you got one that doesn’t work hit me up and I’ll send you a MDT metal/polymer mag that we’re shipping with now.
Bolt coating is melonite and we are definitely ramping up production on all rifles. Added almost 35,000 sqft and we’re rolling
Thanks for all the positive coments! Glad you’re enjoying the Hits! Any accessories you wanna see let me know we’re ready to add some!
Bolt coating is melonite and we are definitely ramping up production on all rifles. Added almost 35,000 sqft and we’re rolling
Thanks for all the positive coments! Glad you’re enjoying the Hits! Any accessories you wanna see let me know we’re ready to add some!
It is great to see the owner of the company keeping up with posts here! I really like the HIT. Is there any potential for a shorter barreled version coming to market? Something along the lines of a 16/18" 308 designed to be light and handy like a Sig Cross. That would be phenomenal!Hey everyone, been a bit but I should be on here a little more if ya have questions. We got a bunch of Magpul mags that only feed 308 well so if you got one that doesn’t work hit me up and I’ll send you a MDT metal/polymer mag that we’re shipping with now.
Bolt coating is melonite and we are definitely ramping up production on all rifles. Added almost 35,000 sqft and we’re rolling
Thanks for all the positive coments! Glad you’re enjoying the Hits! Any accessories you wanna see let me know we’re ready to add some!
Similar threads
