height above bore and cheekriser options (minimal issue)Arguments for or against the 4-16X50 F1 vs the 42mm?
overall size and weight
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
height above bore and cheekriser options (minimal issue)Arguments for or against the 4-16X50 F1 vs the 42mm?
Optically though? I think they are within 3 oz and 1 inch? For an ar 10 what would you pick?height above bore and cheekriser options (minimal issue)
overall size and weight
Thoughts on an SHV 4-14 F1 or 5-20? Seems like a great scope used that doesn't cost a ton. Anyone have a red dot at 45 deg or on top of the scope? How much do you actually use it? I feel like the 4-14 would handle 90% of situations as a 16" 308 is 800-1000 yd gun max.
Hi there!
Just got a new custom made 18” AR-10 in .308 about a month ago, and I am torn on what scope I want to throw on it!
I live in Texas and This gun will primarily be used for hunting whitetail out to about 300 yards. Varmits / pigs out to 600 yards and steel out to about 900 / 1K (I don’t need to hit the steel accurately, just do it for fun)
I have been doing TONS of research and am pretty much stuck between the Nightforce ATACR 4-16x42 f1 and the Nightforce NXS 2.5-10x42.
I have never physically seen or held either of these scopes, and would love to hear from someone that has used them.
I will be walking around the ranch / hunting in a blind / driving around with this rifle so having an overly heavy rifle is less than ideal. It’s at 8 pounds as is, so it won’t be the lightest rifle, and that’s fine, but I certainly don’t want something that it super unwieldy.
Would love to have the ATACR’s 16x, but I hear it’s pretty heavy. Some folks say its perfect for the AR and some say it’s too heavy.
I do love the weight of the NXS, but wish it had just a couple more degrees of magnification.
Fell in love with the Leupold Mark 6 on paper, but after reading too many negative reviews about tracking issues, I decided NF might be the way to go. Not really looking to spend above the ATACR range.
Would love to get yalls thoughts and opinions! Am open to hearing about other scopes that might fit my needs well!
Thank you!!
I have a gen 1 Vortex PST 6-24 and a NF Atacr 5-25, both SFP. If I needed another long range scope, I'd probably go the PST route again. Sure, the NF has better glass, but for non competitive target shooting to 1000 I think the PST is the better value.
I have an older model Nikon Tactical 2.5-10X44 on my Armalite AR-10. I first mounted it with a Larue QD setup, but since I use it for the "new" F-AR discipline, I replaced that heavy Larue mount with a pair of Burris XTR Signature rings.
My Armalite has a 20 inch barrel, it's the older and now discontinued B model. Since yours has an 18 inch, I'm guessing it's the A model. So, what bullet are you loading to get to 1000 yards with an 18 inch barrel? In order to staty at Mag length, I use the 175 BTHP in mine, but I have no intention of going to 1000 yards with it as it's going to be barely supersonic.
The 10X of my old Nikon has been quite sufficient for 300 yards and I have yet to try 600 yards with it, but since the targets are the huge NRA MR-1, I think 10X will be plenty.
I've also taken my Armalite deer hunting (the very few times that I hunt) and it's heavy, because it has a heavy 20 inch barrel on it. It comes in around 11-12 pounds with the scope installed, and the bipod off . Here is a picture with the Larue mount. I have since replace the grip and the stock. That Nikon Tactical 2.5-10X44 is a big scope.
View attachment 7115945
It's an amazing scope and I hve been using it since about '05. I have the illuminated reticle and I've gone hog hunting at night with it. Brought down a 275 pounder at full gallop at midnight with a Scirocco 75gr @ 85 paces. The other guys could not see anything in their scopes, I could; it was like shooting fish in a barrel.I havn't seen the old Nikon Tactical in a long time. It was a very solid scope for the time and should still work well.
ILya
What kind of mount do you have your ATACR in on your Noveske?
For the 16x i used a Spuhr Cantilever 1.50 height.What kind of mount do you have your ATACR in on your Noveske?
Are you using the 1-8 for your 308? If so what do you like better about than the 4-16?For the 16x i used a Spuhr Cantilever 1.50 height.
But for the new 8x. I am trying a QD cantilever spurhr
The rifle has seen so many optics. Still not happy.Are you using the 1-8 for your 308? If so what do you like better about than the 4-16?
Personally like the MK6/DPP more. And much lighter.Good feedback. I have a Noveske N6 Switchblock, I am looking for an optic for. For what is worth the 4-16 looked like sweet on the gun.