Can’t wait to see/hear the details on this! Gotta be coming soon since it’s on their IG stories.
-
Having trouble using the site?
Contact support
Suppressors New TBAC Brake+Can
- Thread starter tenringx
- Start date
Interesting.
Can't say I'm a huge fan of brakes at the end of suppressors, but TBAC makes high quality stuff. So at least it's going to be a quality option for those that want this sort of thing.
Can't say I'm a huge fan of brakes at the end of suppressors, but TBAC makes high quality stuff. So at least it's going to be a quality option for those that want this sort of thing.
Depends on your objective. But for those that doubt the effectiveness, watch the 50 cal video again.
When these go public we'll have a full data package showing sound and recoil performance.
When these go public we'll have a full data package showing sound and recoil performance.
I completely agree and understand it on the 50 cal. Just not really interested in a competition specific suppressor but I totally understand why others are and there's definitely a market for it. Will there be a normal endcap for it? If so will it be competitive sound wise with other suppressors in it's size range?
@Zak Smith I'm very excited to see this prototype!
A couple questions/comments/thoughts, understanding you're not at liberty to answer them:
1. Do you have any videos on how timing the brake works? It looks slick, but I'm not understanding how the brake gets clocked correctly once the can is threaded on. (same as on the 50 cal?)
2. Would this for sure be a stand-alone only can, or would a Dominus/Magnus be able to be retrofitted to the new front end cap?
3. Is the brake being optimized for RECOIL reduction, or MUZZLE RISE reduction? The 419 Maverick was touted during its design to reduce muzzle rise, which is more of an important consideration from a match perspective versus rearward recoil (especially because 6mm PRS cartridges have very little recoil anyway)
4. Any analysis on effectiveness of the brake vs length of suppressor? Again, referencing the Maverick they have the two different lengths, with the shorter length being better at reducing muzzle rise but being louder.
I only have a few rounds behind a 6GT with a Maverick on it, and I was impressed at how the rifle stayed on target but I thought it was LOUD. I'm really curious to see how this new can of yours shakes out!
A couple questions/comments/thoughts, understanding you're not at liberty to answer them:
1. Do you have any videos on how timing the brake works? It looks slick, but I'm not understanding how the brake gets clocked correctly once the can is threaded on. (same as on the 50 cal?)
2. Would this for sure be a stand-alone only can, or would a Dominus/Magnus be able to be retrofitted to the new front end cap?
3. Is the brake being optimized for RECOIL reduction, or MUZZLE RISE reduction? The 419 Maverick was touted during its design to reduce muzzle rise, which is more of an important consideration from a match perspective versus rearward recoil (especially because 6mm PRS cartridges have very little recoil anyway)
4. Any analysis on effectiveness of the brake vs length of suppressor? Again, referencing the Maverick they have the two different lengths, with the shorter length being better at reducing muzzle rise but being louder.
I only have a few rounds behind a 6GT with a Maverick on it, and I was impressed at how the rifle stayed on target but I thought it was LOUD. I'm really curious to see how this new can of yours shakes out!
Can you answer 3 other basic questions since i have no idea what this is, as I haven't seen this yet... Caliber? Length? Purpose?
Appears to be another TBAC suppressor but with a brake on it.
It’s going to be out in a year minimum. He will probably post stuff prior to the official launch.
Good call… Now I can read what it says… Magnus-S BR CB. So it’s a short Magnus, that’s like 7” (without the brake) I’m guessing with a CB brake setup.
If it’s a .30 cal, and will be available with the HUB thread option, and can be had without a brake, @TBACRAY you can count me in for one. Where do I send my money for a prototype in black?
That would be a perfect precision hunting can.
I for one am very excited about this. I am a huge can whore and also primarily shoot competition. I have an Area 419 Maverick right now that is my favorite setup for matches. But I love my TBAC cans too, and more options are always a good thing. Good job TBAC!! I will be ordering one for sure once I can.
That will be interesting to see. I have seen the Maverick in action and in my opinion it was more of a brake than a suppressor.
These definitely fall into a niche of people who would utilize them for certain purposes. I shoot 100% suppressed all the time and for me the small amount of recoil and "muzzle flip" is well worth the possibility of not getting points or being able to spot trace to correct a miss.
Still a big TBAC fan though, I am sure I will see some in action soon enough.
I was offered to test out a new can to provide feedback and I do have to say it worked great. My POA stayed within whichever target I was shooting, even caught myself with light shoulder pressure due to odd positions and still staying on target to spot impacts. I have shot all the best brakes out there and this is comparable. It is also quiet.
Edit: I said POI instead of POA
Last edited:
We're not taking orders until the official announcement but if you email us we'll put you on a list of interested people
I’m in your system from ordering my Magnus. Count me in, if it’s .30 caliber. I need another 7” precision can for my ultralight hunting rigs.
Don't forget to tell TBAC to go with HUB so you can remind the forum about it next year.Good call… Now I can read what it says… Magnus-S BR CB. So it’s a short Magnus, that’s like 7” (without the brake) I’m guessing with a CB brake setup.
If it’s a .30 cal, and will be available with the HUB thread option, and can be had without a brake, @TBACRAY you can count me in for one. Where do I send my money for a prototype in black?
That would be a perfect precision hunting can.
Oh don't worry... I will. Just like I'll remind you to go fuck yourself.
Sorry for the delays with this and the 50 can. Tooling availability issues have been dogging us the whole second half of this year. We still plan to have this by SHOT for sure.
Well, tell @TBACRAY that I need a Magnus-S (HUB) in black. First production run. Count me in for sure. Just shoot me the invoice and I'll pay it. Yall already have my local FFL on file.
Sorry for the delay. We should have details out in about a month +/- 1 week.
Yes, but I won't say more than that until we have the data package ready
You can start your own post if you like telling about your products after becoming a Commercial Supporter, link below on how to do so, on the site to try and sell your products here. Read the site rules also.
www.snipershide.com
Account upgrades
www.snipershide.com
Hi, thank you for the feedback and the opportunity to continue the discussion! We're super excited about our new contribution to the PRS/NRL community and the response has been overwhelmingly positive. See you at SHOT Show!
Guess the sales aren’t good enough to pay for a commercial account to properly advertise your crap
Hi, thank you for the suggestion!
What a great response, and a great representation of the quality individual that Sniper's Hide brings to the industry. We appreciate the feedback, and this is a new account so we hadn't setup the vendor account when we originally posted. But thanks to the helpful comments we've gotten from this thread, now we know and will setup the commercial account, promptly. Thank you, and safe shooting!Guess the sales aren’t good enough to pay for a commercial account to properly advertise your crap
Nice attempt at a jab, but when your business ethics are to hijack a thread of a competitors product who is a long time supporting vendor to try to pimp your crap it says all that needs to be said about you.
Is this some AI chat crap??? How the F do you come on this thread about a Thunderbeast suppressor, which includes post from a representative from TBAC, and think somehow post #11 even remotely would ever be directed at you... You realize those questions were specific to the forthcoming TBAC offering not just some general "what if" about cans in general??
What a weird ass way to start off trying to move your no name crap. I'd actually recommend against what everyone else is saying, don't waste your money on a commercial account here. Pretty bad look and horrible start.
But didn’t you read their website? A bolt gun will melt a titanium can. I guess we’ve all just been super lucky to this point.
