Gunsmithing New to custom R700 actions. Any barrel work?

[sissupr]

Here’s my story and question. I’m about to take delivery of a Deviant Elite action with a 26” Bartlein 6CM barrel. But I’ve been itching to try out something different...

I’m thinking of moving to 6BR/Dasher and my question is... will any barrel that is for a Rem 700 fit my Deviant action. This is my first custom action. For example, if I bought a barrel 6BR barrel off a Cadex or Impact action, would it work on my Deviant Elite Action without issue or special parts/tools?

Apologize for the ‘newbie’ question, just want to make sure. I understand all the chassis/stocks are pretty much interchangeable (within reason based on barrel contour, lug, etc)... just not sure about the barrel to the action.

 

[LRI]

Chances are, no. "Remington Clone" is a very vague description anymore. There's a small menu of dimensions that have the potential for big consequence should a guy just "go for it" without the appropriate gauging and means of fitting parts together. Swapping from one action design to another is roulette.

Your better option(S):

1. Have a blank fitted by a reputable shop known to understand this stuff.
2. Purchase a quick change type barrel that uses a Savage style spanner ring to jam nut the barrel to the receiver. -this will also require some tools and headspace gauges (there are some exceptions to the gauging part of this) for the cartridges you wish to use.

 

[Rubicon Precision]

If it’s the Deviant Elite with the cone breech, chances are, you won’t find a barrel made to fit. It is going to need to have a blank fit and chambered by a smith/rifle builder.

 

[sissupr]

Appreciate the replies. I’m most likely just rechamber it to 6BR or dasher (haven’t decided) and have a local Smith do it... the Smith I talked to is familiar with Defiant actions and is charging $200 to rechamber it. Thanks again all...