Newbie ring search

[justinmac13]

Just getting started, so far I have a Howa HCR and a Burris XTR II 5x25x50 34mm tube on the way, my question is what ring height should I go with. Howa comes with a EGW 20 moa rail. Not trying to break the bank do you have any good recommendations?

 

[Wyfox]

1" would be perfect. Look at the Burris tactical rings or TPS for budget 34mm. You can often find Nightforce and Seekins in the PX here for $100.

 

[BobinNC]

Anywhere from 0.90" to 1.00" to the middle of the ring will work fine. I really liking Burris new options with their XTR Signature Rings. Their 34mm 1.0" height should work fine for your application. You can even add another 10 to 15 MOA, for a total of 30 to 35 MOA of cant with the supplied inserts.

https://www.midwayusa.com/product/1...actical-signature-picatinny-style-rings-matte

Best price I've found and I've bought from a pair from these guys:

https://www.gunbroker.com/item/725763343

 

[justinmac13]

Thanks guys, Appriciate the help.

 

[EddieE]

I just got the Burris xtr rings. Very cost effective and well made. Amazon price is around $55

 

[stello1001]

Not sure where you ordered your HCR from but mine came with no base nor rail. Just a lil FYI in case you have not received it and are expecting it to have a rail.

 

[justinmac13]

Not sure where you ordered your HCR from but mine came with no base nor rail. Just a lil FYI in case you have not received it and are expecting it to have a rail.

It is supposed to come with a EGW one piece 20 MOA base. [h=3]Product Details[/h]
Manufacturer #: HCRL72502E20
Manufacturer: Legacy Sports Intl/Howa
Model Series: M1500 Bolt Action HCR Rifle
Type: Rifle: Bolt Action
Caliber: 6.5 Creedmoor
Finish: Black
Action: Bolt Action
Stock: Black BML Chassis system
Capacity: 10+1
# of Mags: 1
Safety: 3-Position Safety
Sights: No Sights
Barrel Length: 24 Heavy Threaded Barrel, 5/8x24 Thread
Overall Length: 39 Collapsed, 43.25 Extended
Weight: 10 LBS
Features: BML Chassis, Luth MBA-3 Fully Adjustable Buttstock
Extra Features: EGW One Piece 20MOA Base, 10 Rnd Steel Mag, Dav Exc
Butt Plate: Black Rubber Recoil Pad
Receiver: Black

 

[stello1001]

Nice, looks like you got a package deal slightly different than mine lol. Where did you order from if you don't mind me asking?

 

[justinmac13]

Nice, looks like you got a package deal slightly different than mine lol. Where did you order from if you don't mind me asking?

Dodds sporting goods out of WV, they were on GB. Really nice guys up there to deal with.

 

[Matt @ LSI]

The factory rifle only setup, does not come with a rail. the scoped package does include the EGW 20moa rail

 

[justinmac13]

The factory rifle only setup, does not come with a rail. the scoped package does include the EGW 20moa rail

I did not get the scoped package, but it did come with the rail in the package.

 

[lancetkenyon]

34mm Low rings (.92-.94") should clear a 50mm objective scope easily. Even with a heavy contour barrel.

Here is a 50mm objective on a 20MOA base w. 34mm low (.92") Seekins rings over a Bartlein #3 contour



Here is a 56mm objective on a 20MOA base w. 34mm low rings over a Bartlein Remington Sendero contour.



56mm objective on a 20MOA base w. 34mm low rings over a Bartlein #3 contour

 

[TravisP]

I have had good luck with using TPS rings on an EGW one piece base.


Sent from my iPhone using Tapatalk

 

[justinmac13]

Thanks for all the input I went with the burris xtr signature rings. Just waiting on the new scope to come in, they sent me one with the g2b reticle and I was looking for th scr reticle.

 

[EddieE]

Thanks for all the input I went with the burris xtr signature rings. Just waiting on the new scope to come in, they sent me one with the g2b reticle and I was looking for th scr reticle.

I bought the Burris XTR since my Seekins low rings didn't work well with my scope/chassis set up. They were too low. One caution for you is that I have read a bunch of reviews on the XTR that say even when using a torque wrench set at 60 inch, the screws stripped. The range Burris gives is 65-100 inch pounds. I did 50 and seemed fine.

 

[Shamablam]

A word to the wise, I bought a Burris xtr2 to go on a tikka tac a1. I also selected the Burris xtr signature rings because of reviews and the adjustable cant. I started with the medium 1”” rings and they are too low due to the full length pic rail. I swear I did the calculation but must have been looking at the ocular diameter or something. On a rifle without a full length rail I think it would be fine.

Xtr2 objective = 58mm
distance to clear full length rail = 28mm = 1.1””. Not counting cant which is a mm and change or flip up covers which is even more.

So I returned my 1” xtr signatures in exchange for the highs which provide 1.5” clearance. These will leave a little margin to avoid hand guard hitting the optic during recoil.

 

[308pirate]

One caution for you is that I have read a bunch of reviews on the XTR that say even when using a torque wrench set at 60 inch, the screws stripped. The range Burris gives is 65-100 inch pounds. I did 50 and seemed fine.

Hopefully no one is tightening the screws that hold the two halves of the rings together to anywhere near 50 in-lb. Those screws are Torx T-15s (IIRC) and should not be tightened more than 15 - 20 in-lb. The nut that clamps onto the rail should be 50 - 55 in-lb.

 

[EddieE]

Hopefully no one is tightening the screws that hold the two halves of the rings together to anywhere near 50 in-lb. Those screws are Torx T-15s (IIRC) and should not be tightened more than 15 - 20 in-lb. The nut that clamps onto the rail should be 50 - 55 in-lb.

Sorry, I meant the clamp screw/bolt that holds the lower ring to the base.