Now I see why no one sells thier atlas bipods

#51
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zeke013</div><div class="ubbcode-body">Where are you guys ordering these? No one seems to have any in stock. </div></div>

triadtactical.com has them in stock. Cheap shipping too.
 
#53
Re: Now I see why no one sells thier atlas bipods

Last question:

Do any of the Atlas OEM adapters allow you to connect rail to a single sling stud? Or do the OEM adapters all require a second attachment point such as the machine screws?
 
#55
Re: Now I see why no one sells thier atlas bipods

seems like there are an awful lot of springs, detents, and moving pieces to get jammed with debris
also looks hard to depoly quickly one-handed in prone with all those notches and buttons on both sides.
 
#57
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PeterN</div><div class="ubbcode-body">I have both a Harris bench rest model and an Atlas V8. I have been shooting them alternately at 600 and 800 both from the bench and prone positions to see if I was getting better results with one or the other. So far I have not been able to see any difference between the two on the targets. Has anyone done a similar comparison and if you have what were the results?</div></div>

Yes, I have found better results with the Harris for a square range. I think the reason is that the Atlas allows you to pan, which allows the legs to be at an angle with the target. In the field, this is desirable. For target shooting, it is not.

I equipped all of my rifles with pic rails so that I can switch back and forth between my Harris and my Atlas. With the price tag of the Atlas, I wasn't going to put one on each rifle. And again, there is no need to. I added a QD mount to my Harris, and I can interchange very quickly.
 
#58
Re: Now I see why no one sells thier atlas bipods

For me the major attaction of the Atlas vs. the Harris is the spigot mount that actually can get fairly tight. The Harris is quicker to deploy (Atlas is hard to deploy one handedly often)and running in muddy and wet conditions is superior to the Atlas IMO also when using against a barricade the Atlas will quickly come loose and thus is not really workable against barricades as a bracing device like the Harris. Either one is an improvement over the Parker Hale / AI. The Atlas IMO is far superior if you are bench or prone shooting as the options for adjustment are much greater and you can get set up easily no matter what your requirements are. Additionally Kasey is pretty kickass.
 
#59
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">What springs?</div></div>

Detents require springs, as do the locking rings for the leg extensions.
 
#61
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">The Harris is quicker to deploy (Atlas is hard to deploy one handedly often)and running in muddy and wet conditions is superior to the Atlas</div></div>
I had this thought, also.
 
#62
Re: Now I see why no one sells thier atlas bipods

Shooting in my first rifle competition yesterday I could saw how the harris was faster to deploy. I didn't have issues changing leg angles on the Atlas mid stage though. Pros and Cons for each.
 
#63
Re: Now I see why no one sells thier atlas bipods

I mean, I'm sure it is an AWESOME bipod, I just don't think it is perfect like some people seem convinced that it is (nothing is perfect). I'd love to own one someday, but until then, Harris is good enough for me with my current cost/benefit analysis.
 
#64
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tactical .22</div><div class="ubbcode-body"> I'd love to own one someday, but until then, Harris is good enough for me with my current cost/benefit analysis. </div></div>

End the end that's all that really matters!
 
#65
Re: Now I see why no one sells thier atlas bipods

Wow, thanks guys, I truly appreciate your support and sharing your observations.

Tactical .22, the Harris is a great bipod and a ton of folks like them and have good success with them and the same can be said for several other bipods.

It is personal preference.

Regarding the springs and detents and all the moving parts, if they get jammed up they can be cleared just as easy.

Is the Atlas perfect? No.

That is why we keep listening to objective feedback from actual users as we desire to make the best bipod we can.

Also, the application varies, our largest govt. customer does not shoot a lot of square range stuff so the adaptability of the Atlas to the terrain trumps the speed of leg deployment.
 
#66
Re: Now I see why no one sells thier atlas bipods

yea I was impressed with the quality,better than I expected,there costumer service is outstanding too!!


Rob
grin.gif
 
#67
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">That is why we keep listening to objective feedback from actual users as we desire to make the best bipod we can.</div></div>
grin.gif

Nice. Commitment to excellence is what separates the good from the great. I like that.
 
#68
Re: Now I see why no one sells thier atlas bipods

I picked up a V8 w ADM mount recently... after just looking at it, not even using it yet I'm pretty sure I'll be buying 2-3 more!!
 
#73
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kasey</div><div class="ubbcode-body">Wow, thanks guys, I truly appreciate your support and sharing your observations.

Tactical .22, the Harris is a great bipod and a ton of folks like them and have good success with them and the same can be said for several other bipods.

It is personal preference.

Regarding the springs and detents and all the moving parts, if they get jammed up they can be cleared just as easy.

Is the Atlas perfect? No.

That is why we keep listening to objective feedback from actual users as we desire to make the best bipod we can.

Also, the application varies, our largest govt. customer does not shoot a lot of square range stuff so the adaptability of the Atlas to the terrain trumps the speed of leg deployment. </div></div>

Personally, I wish this bipod would attach to a sling swivel like my Harris will. I don't want to drill a hole in my rifle's stock to accommodate it
 
#74
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zeke013</div><div class="ubbcode-body">
Personally, I wish this bipod would attach to a sling swivel like my Harris will. I don't want to drill a hole in my rifle's stock to accommodate it </div></div>

I was considering trying something like this just to use an Atlas, not sure how well it works though.

Weaver Swivel Stud Picatinny Rail Adapter
 
#75
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fngmike</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zeke013</div><div class="ubbcode-body">
Personally, I wish this bipod would attach to a sling swivel like my Harris will. I don't want to drill a hole in my rifle's stock to accommodate it </div></div>

I was considering trying something like this just to use an Atlas, not sure how well it works though.

Weaver Swivel Stud Picatinny Rail Adapter

</div></div>


if it stays tight that would work.
 
#76
Re: Now I see why no one sells thier atlas bipods

I broke a spot-weld on my Harris at a match, so I'll be replacing it with an Atlas soon. I'm not knocking Harris at all. I think they're a fine bipod, I'm just pretty hard on my gear. "Train how you'll fight" right?

The Atlas models I've seen in the field look beefy and simple, and I like that in both equipment and women.
 
#77
Re: Now I see why no one sells thier atlas bipods

those atlas bipods are pretty sweet just got mine a little bit ago to replace the harris bipod i was using, i havent tested it yet but it looks like its build like a tank!
 
#79
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triad</div><div class="ubbcode-body">Thanks for the mention, we would have more tomorrow.

http://www.triadtactical.com/Accu-Shot-Atlas-Bipod.html </div></div>

Thanks for the help on the phone today Steve. I look forward to getting it and experiencing it for myself. I don't think I'll be disappointed based on what lots of folks here say about it.
 
#80
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zeke013</div><div class="ubbcode-body">Anyone got experience with that adapter? </div></div>

I had one that worked the same but also had a sling swivel on it. I didn't like it. It could still get knocked out of position even when torqued down hard. A rail section with two screws or bolts would be better IMO.
 
#82
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: thehjot</div><div class="ubbcode-body">The Atlas models I've seen in the field look beefy and simple, and I like that in both equipment and women. </div></div>

..gotta love it!
 
#84
Re: Now I see why no one sells thier atlas bipods

Tactical .22, I'm obligated to be that way. We would not have the success we have today without our customers and I will always be mindful of that and never take it for granted.

zeke013 - "Personally, I wish this bipod would attach to a sling swivel like my Harris will. I don't want to drill a hole in my rifle's stock to accommodate it"

There are three options I know of, GG&G, CCA and Weaver. I do not make any recommendations on or for any of the three. My position is the ones I have seen (GG&G and CCA) either require the action/barrel to be removed and or set screws set into the stock to keep the rail from spinning (see Mister Ouchie post above). AND if I'm going to separate my stock and action or set set screws into my stock, then I prefer to drill a second hole and use a T-nut. There is no way I'd do this to a high end wood stocked gun, a sling will suffice fine thank you. But if it is my shooter, I'm drilling it and not looking back.
 
#85
Re: Now I see why no one sells thier atlas bipods

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kasey</div><div class="ubbcode-body">Tactical .22, I'm obligated to be that way. We would not have the success we have today without our customers and I will always be mindful of that and never take it for granted.

zeke013 - "Personally, I wish this bipod would attach to a sling swivel like my Harris will. I don't want to drill a hole in my rifle's stock to accommodate it"

There are three options I know of, GG&G, CCA and Weaver. I do not make any recommendations on or for any of the three. My position is the ones I have seen (GG&G and CCA) either require the action/barrel to be removed and or set screws set into the stock to keep the rail from spinning (see Mister Ouchie post above). AND if I'm going to separate my stock and action or set set screws into my stock, then I prefer to drill a second hole and use a T-nut. There is no way I'd do this to a high end wood stocked gun, a sling will suffice fine thank you. But if it is my shooter, I'm drilling it and not looking back. </div></div>

Excellent input. Thank you for your response.

I am going to decide if this is my shooter or my baby - but regardless my next rifle will sport an Atlas.
 
#86
Re: Now I see why no one sells thier atlas bipods

zeke013, you are welcome and thank you for your interest!

I continue to think about the "Stud to Rail" adapter and always come back to the simplicity of the rail. I've also toyed with a different attachment system that would be smooth and sexy, maybe we do that this year.....
smile.gif
 
#87
Re: Now I see why no one sells thier atlas bipods

Well - your reply in this thread just sold a bipod . . .

I couldn't resist. That's my second order from Triad in the last week. And, unfortunately, I can never just order one item. Also ended up with a TAB mat and a Tactical Interventions sling. Brutal.

I purchased a Weaver Picatinny System adapter for the stud.

We'll see.
 
#88
Re: Now I see why no one sells thier atlas bipods

Got my v8 and a spigot yesterday and feels/looks pretty nice and fits nice and snug. I understand what folks are saying about it being a little easier to load this bipod. I haven't taken it out as I'm waiting on SW Ammo's to come in (yes, I have other ammo on hand but I'm eager to do take their new ammo out and test it on a long range and it's a long drive for me so I can wait since the ammo is almost here).

I did notice that the "cups" one pushes down to release the legs seem like they need to be 'worked' as it sort of jams a little. But it's functional, so it's no deal breaker for me and maybe with time and use it will work out fine.

If this works well, I might have to get at least one more. LOL. It never ends.
 
#90
Re: Now I see why no one sells thier atlas bipods

They are currently filling military contracts. If you find one at a reasonable price grab it.

They are more usefull on semi autos for quick target aq. Since you have to manipulate a bolt anyway, it doesn't cut down on target aq as much (not that it isn't useful on both). As stated above the harris is more stable with fewer degrees of freedom for target shooting although practice with the atlas would make the point irrelevant.
 
#91
Re: Now I see why no one sells thier atlas bipods

Now that I have some rounds off the Atlas, I can say all my guns will have one. They load great, the panning is very nice, and tracking with an unbreaked 308 is easy, of course the 15.8 lb rifle might help too. Everyone that has used it has also been impressed.
 
You must log in or register to reply here.

Similar threads

PremiumBepis
SOLD Accuracy International AT 2.0 Chassis M700 AICS, IMUNS, Thumbhole Skins
Replies
3
Views
1K
PremiumBepis
PremiumBepis
Jsp556
Armalite AR10A TAC 18
Replies
16
Views
2K
Jsp556
Jsp556
Danilla_Ice
Ruger M77 Mark 2 30.06 blew up in my face today - I just now see why
Replies
47
Views
4K
RegionRat
R
PatMiles
Why is the FDA Contaminating America’s Blood Supply?
Replies
10
Views
1K
mrdrar
mrdrar
BigJimFish
2024 BigJimFish Review / Article blog: PurePrecision, Precision Straight-Walled Cartridge Rifle, Proof, XTPS trigger, Levels
Replies
23
Views
2K
BigJimFish
BigJimFish
Top Bottom
Back
Home
Forums
Merch
Alerts