-
Having trouble using the site?
Contact support
Official (DTA) SRS, HTI, Covert, Hunter Thread
- Thread starter patches
- Start date
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
Any one make a 22-250 conversion for the SRS?
Seems like this rifle could potentially get rid of a 3-4 rifles in my safe. It would be kind of nice to use the same platform for much of my shooting.
Any one make a 22-250 conversion for the SRS?
Seems like this rifle could potentially get rid of a 3-4 rifles in my safe. It would be kind of nice to use the same platform for much of my shooting.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
Maybe
http://www.freedomgunworks.com/desert-ta...ut/prod_39.html
Maybe
http://www.freedomgunworks.com/desert-ta...ut/prod_39.html
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RMW</div><div class="ubbcode-body">Any one make a 22-250 conversion for the SRS?
Seems like this rifle could potentially get rid of a 3-4 rifles in my safe. It would be kind of nice to use the same platform for much of my shooting. </div></div>
It made 3 of my other rifles disappear and I haven't gone looking for them.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RMW</div><div class="ubbcode-body">Any one make a 22-250 conversion for the SRS?
Seems like this rifle could potentially get rid of a 3-4 rifles in my safe. It would be kind of nice to use the same platform for much of my shooting. </div></div>
It made 3 of my other rifles disappear and I haven't gone looking for them.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
Here is Later hitting a 10x17" Torso target at 600 yards with Tuscondave's custom .338 subsonic cartridge in the DTA Covert with DTSS (Desert Tactical Sound Suppressor). The stills at the start aren't Later. Video courtesy of Dogtown.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/cPwx1bC66sU"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/cPwx1bC66sU" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
Here is Later hitting a 10x17" Torso target at 600 yards with Tuscondave's custom .338 subsonic cartridge in the DTA Covert with DTSS (Desert Tactical Sound Suppressor). The stills at the start aren't Later. Video courtesy of Dogtown.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/cPwx1bC66sU"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/cPwx1bC66sU" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
Picked up my 338/308 today. So excited I left work two hours early to make sure it spent the night safely in my gun vault
Now I've just got to get my reloading gear all set up (ordered the chargemaster 1500 combo yesterday) so I can shoot for closer to a buck instead of 6-7/shot...
First impression...man this thing is a solid hunk of steel! Cant wait to get the NF on it and take it out to the range...
Picked up my 338/308 today. So excited I left work two hours early to make sure it spent the night safely in my gun vault
Now I've just got to get my reloading gear all set up (ordered the chargemaster 1500 combo yesterday) so I can shoot for closer to a buck instead of 6-7/shot...First impression...man this thing is a solid hunk of steel! Cant wait to get the NF on it and take it out to the range...
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
I was told 4-6 weeks when I ordered, but I think it ended up taking at least twice that...likely due to the misplaced order in the beginning. On the bright side, that gave me more time to get my reloading equipment ordered and they let me add the 308 barrel for the original rate. At the end of the day...I'm happy...
I was told 4-6 weeks when I ordered, but I think it ended up taking at least twice that...likely due to the misplaced order in the beginning. On the bright side, that gave me more time to get my reloading equipment ordered and they let me add the 308 barrel for the original rate. At the end of the day...I'm happy...
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
Wish I could find one of these in 338, 308, a chassis or all of the above at old pricing.
Wish I could find one of these in 338, 308, a chassis or all of the above at old pricing.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
I wouldn't mind finding a gently used one myself.
A chassis and conversion went up about $500 right? I understand that they have to make money but it still hurts my wallet.
I wouldn't mind finding a gently used one myself.
A chassis and conversion went up about $500 right? I understand that they have to make money but it still hurts my wallet.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th
DTA has hit the United Kingdom. Thanks Ewan!
My 300 Win Mag fresh out of the box in England.
Now got to wait 3 weeks before I get range time
Going to put a Nightforce NXS or Leupold on it for a couple of months, until I can convince my girlfriend I really need a Schmidt....
Has anyone got any load suggestions using either Berger or Sierra 210 VLDs, or Hornady A-max 208s?
Thanks
DTA has hit the United Kingdom. Thanks Ewan!
My 300 Win Mag fresh out of the box in England.
Now got to wait 3 weeks before I get range time
Going to put a Nightforce NXS or Leupold on it for a couple of months, until I can convince my girlfriend I really need a Schmidt....
Has anyone got any load suggestions using either Berger or Sierra 210 VLDs, or Hornady A-max 208s?
Thanks
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
What is the chamber length for the 300wm
Will it shoot the A191 round
How is the recoil for this caliber
What is the chamber length for the 300wm
Will it shoot the A191 round
How is the recoil for this caliber
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Good for you CJ. Just read a bit on the FAC and gun ownership in the UK, which sounds like a total pain. Makes me happy I live in Texas where it's harder to not own a gun than it is to own one
Good for you CJ. Just read a bit on the FAC and gun ownership in the UK, which sounds like a total pain. Makes me happy I live in Texas where it's harder to not own a gun than it is to own one
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
So originally I was fixated on the 50bmg for the new HTI coming up in q4...but when I picked my srs up this week the guy at the gun store said 50bmg's aren't really selling anymore because there are less and less places to shoot them (at least here around Austin, TX). still love the idea of the 50bmg (especially since I already have a 308 and 338), but now I'm having second thoughts on my first conversion kit for the hti. For those of you planning to buy an HTI...what conversion kit are you planning to start with and why? Also...are all calibers coming out in Q4?
So originally I was fixated on the 50bmg for the new HTI coming up in q4...but when I picked my srs up this week the guy at the gun store said 50bmg's aren't really selling anymore because there are less and less places to shoot them (at least here around Austin, TX). still love the idea of the 50bmg (especially since I already have a 308 and 338), but now I'm having second thoughts on my first conversion kit for the hti. For those of you planning to buy an HTI...what conversion kit are you planning to start with and why? Also...are all calibers coming out in Q4?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
I've got a friend that is in Omaha NE if anyone near there that would allow him to see or shoot their rifle. I am willing to put my name out for him. Thanks, Anthony
I've got a friend that is in Omaha NE if anyone near there that would allow him to see or shoot their rifle. I am willing to put my name out for him. Thanks, Anthony
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
sr90...have you guys already tested all four caliber options? Just curious if your feedback is relative to all four options you tested or just really positive impression of the 375 so far? And is there one thing specifically that stands out with the 375?
sr90...have you guys already tested all four caliber options? Just curious if your feedback is relative to all four options you tested or just really positive impression of the 375 so far? And is there one thing specifically that stands out with the 375?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Wow! I just visited my new SRS. 308 and I think I'm in love. Unfortunately, my drivers license expired and I couldn't pick it up. Insha Allah it will be mine tomorrow! I can't wait! Loved how it.felt in my hands today!
Wow! I just visited my new SRS. 308 and I think I'm in love. Unfortunately, my drivers license expired and I couldn't pick it up. Insha Allah it will be mine tomorrow! I can't wait! Loved how it.felt in my hands today!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
1.5" groups at 600 yards with 375CT first loads worked up shot from HTI, 50 bmg is a beast and not even close to as accurate unless you handload but then you still have to be a 300 lb lineman to shoot more than 10 rounds of 50 bmg in one sitting, we are still working on recoil mitigation systems. I am pretty recoil insensitive but I don't like shooting the 50 BMG in any gun. The 375CT recoils almost identically to the srs in 338LM, very reasonable.
1.5" groups at 600 yards with 375CT first loads worked up shot from HTI, 50 bmg is a beast and not even close to as accurate unless you handload but then you still have to be a 300 lb lineman to shoot more than 10 rounds of 50 bmg in one sitting, we are still working on recoil mitigation systems. I am pretty recoil insensitive but I don't like shooting the 50 BMG in any gun. The 375CT recoils almost identically to the srs in 338LM, very reasonable.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr90</div><div class="ubbcode-body">1.5" groups at 600 yards with 375CT first loads worked up shot from HTI, 50 bmg is a beast and not even close to as accurate unless you handload but then you still have to be a 300 lb lineman to shoot more than 10 rounds of 50 bmg in one sitting, we are still working on recoil mitigation systems. I am pretty recoil insensitive but I don't like shooting the 50 BMG in any gun. The 375CT recoils almost identically to the srs in 338LM, very reasonable. </div></div>
285lb ex-linebacker here... let me know if you want to pay me to lay behind those rifles for you.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr90</div><div class="ubbcode-body">1.5" groups at 600 yards with 375CT first loads worked up shot from HTI, 50 bmg is a beast and not even close to as accurate unless you handload but then you still have to be a 300 lb lineman to shoot more than 10 rounds of 50 bmg in one sitting, we are still working on recoil mitigation systems. I am pretty recoil insensitive but I don't like shooting the 50 BMG in any gun. The 375CT recoils almost identically to the srs in 338LM, very reasonable. </div></div>
285lb ex-linebacker here... let me know if you want to pay me to lay behind those rifles for you.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Anyone know if there is a .223/5.56 conversion that anyone does for the SRS? I have the .308 and .338lm SRS. Would love to use it for ground hog shooting in a 5.56 round.
Anyone know if there is a .223/5.56 conversion that anyone does for the SRS? I have the .308 and .338lm SRS. Would love to use it for ground hog shooting in a 5.56 round.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ravkin</div><div class="ubbcode-body">Anyone know if there is a .223/5.56 conversion that anyone does for the SRS? I have the .308 and .338lm SRS. Would love to use it for ground hog shooting in a 5.56 round. </div></div>
I'd be all about it, but the answer is:
No there is not and it doesn't look like it is going to happen. It has been talked about earlier in this thread but I'll save you the reading.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ravkin</div><div class="ubbcode-body">Anyone know if there is a .223/5.56 conversion that anyone does for the SRS? I have the .308 and .338lm SRS. Would love to use it for ground hog shooting in a 5.56 round. </div></div>
I'd be all about it, but the answer is:
No there is not and it doesn't look like it is going to happen. It has been talked about earlier in this thread but I'll save you the reading.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr90</div><div class="ubbcode-body">1.5" groups at 600 yards with 375CT first loads worked up shot from HTI, 50 bmg is a beast and not even close to as accurate unless you handload but then you still have to be a 300 lb lineman to shoot more than 10 rounds of 50 bmg in one sitting, we are still working on recoil mitigation systems. I am pretty recoil insensitive but I don't like shooting the 50 BMG in any gun. The 375CT recoils almost identically to the srs in 338LM, very reasonable.</div></div>
Very nice! So I'm hearing 1/4MOA guarantee for 375 at 600 yards...and to be conservative, 1/3MOA for 408 and 416 50bmg is a beast, so the 1/2 MOA @1000 is totally understandable. jk...though that'd be awesome...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr90</div><div class="ubbcode-body">1.5" groups at 600 yards with 375CT first loads worked up shot from HTI, 50 bmg is a beast and not even close to as accurate unless you handload but then you still have to be a 300 lb lineman to shoot more than 10 rounds of 50 bmg in one sitting, we are still working on recoil mitigation systems. I am pretty recoil insensitive but I don't like shooting the 50 BMG in any gun. The 375CT recoils almost identically to the srs in 338LM, very reasonable.</div></div>
Very nice! So I'm hearing 1/4MOA guarantee for 375 at 600 yards...and to be conservative, 1/3MOA for 408 and 416
50bmg is a beast, so the 1/2 MOA @1000 is totally understandable. jk...though that'd be awesome...Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
48 rounds through mine so far. I moved the trigger a bit farther forward than the factory setting and it really helped.
THe trigger adjustments are excellent. Very well thought out.
48 rounds through mine so far. I moved the trigger a bit farther forward than the factory setting and it really helped.
THe trigger adjustments are excellent. Very well thought out.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
anyone have a NF 5.5-22x56 scope with NF titanium rings on their SRS? If so, can you tell me what size rings you used? My local gunshop gave me medium rings that don't fit and there are two sizes larger to "try". I'm hoping they'll let me just take the other two and bring back the one doesn't work (place is close to work, not home)...but I figured I'd at least ask here to insure I'm able to get out and shoot my srs this weekend...
anyone have a NF 5.5-22x56 scope with NF titanium rings on their SRS? If so, can you tell me what size rings you used? My local gunshop gave me medium rings that don't fit and there are two sizes larger to "try". I'm hoping they'll let me just take the other two and bring back the one doesn't work (place is close to work, not home)...but I figured I'd at least ask here to insure I'm able to get out and shoot my srs this weekend...
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Finally got out to the range with the 338 today. Recoil wasn't bad at all and it shot quite nicely. Just one lesson learned...if you're going to zero in a scope, make sure you have someone competent to spot for you! I tried two guys, one said I was high multiple times and the other said..."not sure, try doing something different". Really!!! As it turns out, I was low and finally got on paper on my own...
Can't wait to get back out to test the 308...
Finally got out to the range with the 338 today. Recoil wasn't bad at all and it shot quite nicely. Just one lesson learned...if you're going to zero in a scope, make sure you have someone competent to spot for you! I tried two guys, one said I was high multiple times and the other said..."not sure, try doing something different". Really!!! As it turns out, I was low and finally got on paper on my own...
Can't wait to get back out to test the 308...
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas?
Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
I had similar issues getting the bolt to lock today in the 338. Since it was my first time out and I'm still getting used to the rifle, I didn't think too much of it.
I had similar issues getting the bolt to lock today in the 338. Since it was my first time out and I'm still getting used to the rifle, I didn't think too much of it.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tucsondave</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber. </div></div>
TD, load 5 rounds into the mag, strip the top round off and the round underneath it nosedives in the mag while the round above it is being stripped. Push the rear of the case and it gets the nosediving round to pop back up, but strip it off, and the round underneath it nosedives again.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tucsondave</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber. </div></div>
TD, load 5 rounds into the mag, strip the top round off and the round underneath it nosedives in the mag while the round above it is being stripped. Push the rear of the case and it gets the nosediving round to pop back up, but strip it off, and the round underneath it nosedives again.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tucsondave</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber. </div></div>
Yup using the bolt stop on the .308. All the mags seem to be sitting just fine.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tucsondave</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber. </div></div>
Yup using the bolt stop on the .308. All the mags seem to be sitting just fine.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tucsondave</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber. </div></div>
TD, load 5 rounds into the mag, strip the top round off and the round underneath it nosedives in the mag while the round above it is being stripped. Push the rear of the case and it gets the nosediving round to pop back up, but strip it off, and the round underneath it nosedives again. </div></div>
no issues on mine. Ya think that that had anything to do with the performance in the other caliber? Bolt,mag etc?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tucsondave</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">Has any one had any problems with their .308 bolt not locking/ejecting brass? I got screwed pretty bad yesterday on it. Basically it fed the round into the chamber but the face didn't lock onto the round and I couldn't close the bolt. So I thought it didn't strip a round off the mag, and ended up locking the next round underneath the already chambered round.
Its starting to do this shit of not locking the boltface onto the current round a good bit. Any ideas? </div></div>
You using the bolt stop on the .308? Also,is your mag just sitting a little low in the front? Push up on the front and see if it moves up just enough to allow the bullet to glide into the chamber. </div></div>
TD, load 5 rounds into the mag, strip the top round off and the round underneath it nosedives in the mag while the round above it is being stripped. Push the rear of the case and it gets the nosediving round to pop back up, but strip it off, and the round underneath it nosedives again. </div></div>
no issues on mine. Ya think that that had anything to do with the performance in the other caliber? Bolt,mag etc?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
DTA HTI .50BMG
Quote from he who shaln't be named:
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I'm extremely impressed with this system so far. Will be swapping the barrel over to .375 and testing that at longer ranges this weekend. </div></div>
DTA HTI .50BMG
Quote from he who shaln't be named:
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I'm extremely impressed with this system so far. Will be swapping the barrel over to .375 and testing that at longer ranges this weekend. </div></div>
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Awesome picture! Not sure I would want to be the one taking it though....
Awesome picture! Not sure I would want to be the one taking it though....
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
What kind of groups are you getting with the 50? If it's anything even close to the 375ct, the HTI is going to be a really exciting platform (which will have to share space in the gun cabinet with my srs)!
On a similar note, I fired my 308 today for the first time(fired the 338 Saturday). Great experience! Didn't have much time to go from zeroing to getting groups, but the bolt manipulation, loading, feel, etc was excellent. No problems at all and it definitely helped me to appreciate the ability to go from the power and cost of the 338 to the 308 in no time at all.
What kind of groups are you getting with the 50? If it's anything even close to the 375ct, the HTI is going to be a really exciting platform (which will have to share space in the gun cabinet with my srs)!
On a similar note, I fired my 308 today for the first time(fired the 338 Saturday). Great experience! Didn't have much time to go from zeroing to getting groups, but the bolt manipulation, loading, feel, etc was excellent. No problems at all and it definitely helped me to appreciate the ability to go from the power and cost of the 338 to the 308 in no time at all.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Damn!!!! The DTA Flamethrower,where do I sign up?
Damn!!!! The DTA Flamethrower,where do I sign up?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Just got my SRS and it is the bee's knee's. It took a while to get but it was definitely worth the wait. I ordered the SRS chassis, 308 and 300 win mag conversions with scope mount. The whole gun is OD green but the hand-guard, receiver and skins are all a different shade of OD. Should I call DTA or is that normal? It dosen't bother me much that the colors are different, but I don't want it to effect resale value. What would you do?
Just got my SRS and it is the bee's knee's. It took a while to get but it was definitely worth the wait. I ordered the SRS chassis, 308 and 300 win mag conversions with scope mount. The whole gun is OD green but the hand-guard, receiver and skins are all a different shade of OD. Should I call DTA or is that normal? It dosen't bother me much that the colors are different, but I don't want it to effect resale value. What would you do?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
yep i'll be getting a HTI when they are released, damn DTA is goin to put me in the poor house
yep i'll be getting a HTI when they are released, damn DTA is goin to put me in the poor house
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The new guy</div><div class="ubbcode-body">Just got my SRS and it is the bee's knee's. It took a while to get but it was definitely worth the wait. I ordered the SRS chassis, 308 and 300 win mag conversions with scope mount. The whole gun is OD green but the hand-guard, receiver and skins are all a different shade of OD. Should I call DTA or is that normal? It dosen't bother me much that the colors are different, but I don't want it to effect resale value. What would you do? </div></div>
Can you post a picture?
By hand-guard do you mean the whole forward rail system? Or just the rail covers? I would expect the plastic skins to be a slightly different shade than the aluminum.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The new guy</div><div class="ubbcode-body">Just got my SRS and it is the bee's knee's. It took a while to get but it was definitely worth the wait. I ordered the SRS chassis, 308 and 300 win mag conversions with scope mount. The whole gun is OD green but the hand-guard, receiver and skins are all a different shade of OD. Should I call DTA or is that normal? It dosen't bother me much that the colors are different, but I don't want it to effect resale value. What would you do? </div></div>
Can you post a picture?
By hand-guard do you mean the whole forward rail system? Or just the rail covers? I would expect the plastic skins to be a slightly different shade than the aluminum.
