-
Having trouble using the site?
Contact support
Official (DTA) SRS, HTI, Covert, Hunter Thread
- Thread starter patches
- Start date
I have had mine for the past 4 months, put 622 rounds through it so far. Load development was like reading tea leaves. Had about 4-5 nodes all with 0.3-0.4gr spreads and all were 1/2 MOA at 200 or better. Final load had an ES of 14 from 50 rounds and largest group was .4 MOA at 100 with called shots.
Shot this 5 shot group today thru my new 20" TS Customs 6.5cm barrel during load work up.
Finally got to put my DT 338 to use! We shot various ranged targets out to 2km.
The Desert Tech ran like a champ here at Gunsite. Had one double feed out of 230+ rounds, but think that may have been user error. I'm very happy with it and their Trasol ballistics app's performance!
1.6km/1 Mile shots were straight forward. Winds were very erratic later in the days so once the Dust Devils kept showing up every 30 seconds, hitting past 1.5km was pure luck with the multi directional wind calls.
I used AB, Trasol, Strelok Pro, Hornady, and a Nomad with Field Firing Solutions ballistics software. My favorite and most accurate was Trasol. FFS would be amazing on a smart phone, but until then, Trasol was spot on and so easy/quick to use. Just wish it had a logging feature, well actually a lot of the features FFS had.
Here's some pics. Oh, the developers for the new Call of Duty game showed up in 2 stretch limos while we were there to get some trigger time. My SendIt's liquid level shattered, the digital part still works fine.
I can't wait to get a 556, 308, and 6.5 conversion now in Covert. Is it practical having a 6.5 16" barrel, or should they be longer?
The Desert Tech ran like a champ here at Gunsite. Had one double feed out of 230+ rounds, but think that may have been user error. I'm very happy with it and their Trasol ballistics app's performance!
1.6km/1 Mile shots were straight forward. Winds were very erratic later in the days so once the Dust Devils kept showing up every 30 seconds, hitting past 1.5km was pure luck with the multi directional wind calls.
I used AB, Trasol, Strelok Pro, Hornady, and a Nomad with Field Firing Solutions ballistics software. My favorite and most accurate was Trasol. FFS would be amazing on a smart phone, but until then, Trasol was spot on and so easy/quick to use. Just wish it had a logging feature, well actually a lot of the features FFS had.
Here's some pics. Oh, the developers for the new Call of Duty game showed up in 2 stretch limos while we were there to get some trigger time. My SendIt's liquid level shattered, the digital part still works fine.
I can't wait to get a 556, 308, and 6.5 conversion now in Covert. Is it practical having a 6.5 16" barrel, or should they be longer?
Attachments
Steven Wiley on the Desert Tech Rifle Shooters Facebook group page makes them for $25 shipped. I have an extra gloss black if you want it for $20 shipped.
Www.hopticusa.com they just came out right before my class started. Same place I got the aluminum bullet quiver.
Question for the reloaders. Anyone have a good starting point for an accurate as possible ELR 338 round? Next time I want to be shooting better stuff than factory Prime ammo.
That hoptic cheek rest pad looks interesting. Think I might order one.
You might try their email address listed on their site or the phone number also listed. A lot of us don't and won't have facebook.
https://deserttech.com/contact-us.php
Frank
https://deserttech.com/contact-us.php
Frank
You can contact Dan here [email protected]
Told quote me, but I believe I saw a post that eluded to the fact that Desert Tech Solutions was taking a bit of a break?
Told quote me, but I believe I saw a post that eluded to the fact that Desert Tech Solutions was taking a bit of a break?
I would like to hear from someone shooting a DTA SRS in .300 Norma Magnum. Tried some search with no success...
What do you want to hear? I have been shooting a TS Customs 28" 300 Norma barrel in my Covert for a little while. I use an Ultra 9 with that barrel and recoil is pretty manageable. Here's a couple groups from load work up. I ended up with this load: 86.5 grains of Retumbo using 225 eld-m's. These are both 5 shot groups on 1" dia. dots.
Last edited:
Thanks guys, I was interested in how recoil was and who made the barrel, how long was the barrel you shoot and so on so you pretty much answered already. Is DTA providing extensions?
Let us know if the 'juice was worth the squeeze'...$1850 for a barrel was a bit off for me to consider.
....and gone!
Attachments
Last edited:
Recoil on these guns in general is very mild for all calibers. I have a 338LM in a 32” barrel and it has less recoil than a typical hunting rifle chambered in 308W. I have shot 100 rounds in one day without any pain or discomfort afterwards. A can or break also help a ton along with the added weight.
I picked up my chassis yesterday from my ffl. I’m soooooo excited to get this rifle together. Should be done in the next 2-3 weeks.
They have a killer deal for Only about $200 more than ordering the stock barrel when ordering the entire kit new.
I’m having SAC make me barrels in 308 and 300 Norma
That is a Revic PMR428
Those are the bullets I'll be working with as well for my 300 Norma barrel. Primarily focused on the 230 SMK, but will try others.
How do you like the scope? I have 6 of them and am liking them a lot. FYI - A 200 yard zero works best for the ballistic calculations.
Electronics aside.....it is a very nice scope. Great clarity, elegant design, great turrets, zero adjustment is simple, etc. and then you throw the electronics on top and it's damn fine piece of kit. Frank is trying to get a group buy going with Revic. If, when, he does I will pick up another.
I did read from Revic that 200 yard zero is best, but thanks for mentioning that. Old habits and all.
I just picked up a new barrel in 284 Win and I'm having trouble getting it to feed from the mag. I'm using a 300/338 magazine and the bullet tip is hitting the base of the barrel.
I'm thinking that bending the mag lips up a bit might help, but I wanted to see if anyone had any experience with this before I risk ruining a mag.
Thoughts?
I'm thinking that bending the mag lips up a bit might help, but I wanted to see if anyone had any experience with this before I risk ruining a mag.
Thoughts?
I bought a little tool from HS Precision to open up and bend mags. I used it for my 6.5SAUM it works perfectly ! Bend away, you can always bend it back
Hey guys, I received my rifle from SAC this week! Absolutely in love with the rifle. .300 win mag installed currently. Ran 80 rounds through her today. Groups at best 1 MOA. I was shooting off of a bench with 40 mph wind or more. Was being pushed around by the wind sitting down, shoulda gone to the ground. New rifle to me, still getting used to the trigger and I hope to get more rounds down range soon. I want those groups to be tighter. I was really surprised how quiet my ultra 9 was with the .300 win. Man, what a great can! Quick questions for y’all, how long till you saw break in take effect on your barrels? What has been your real world experience with POI shift on the thunder beast cans? Pictures are from SAC, they know how to make a rifle and show it off. Super happy with their service as well. It makes me happy and my wallet sad knowing they aren’t too far from where I live.
Looks badass,so jealous you got yours already. I'm still waiting on my barrel from them before I can join the ranks. Got them to do a 16.75 308 on my covert. Next barrel up will def be a 300 wm when and if I ever get pulled for an elk tag.
This is a very uneducated question since I'm contemplating getting a DT SRS A1. How do you all like the trigger on yours?
Any chance you could link that? I've pretty much convinced myself to cancel my Nucleus pre-order and save for a Desert Tech. I'd love a link so I can bookmark it for when I finally get mine.
