Official (DTA) SRS, HTI, Covert, Hunter Thread

[cro789]

Wonder how the 16" covert would do in a 1-9 twist?

 

[deersniper]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Great idea, as I am not too far away from picking one of these up as well.

One question though for those with the .308 conversion. How far out does the barrell extend past the rail? Any reason to be concerned if a suppressor and rail would conflict with each other? (Specifically looking to run a Shark on it)

Plenty of room for a thread on. On the covert.

 

[Georgedubya]

Obvious choice for accuracy would be the desert tech ammo because they guarantee it’ll shoot half inch.
For practice ammo I run Hornady American gunner 140gr bthp. For cheap bulk ammo (200 round cans) it’s great (shoots half inch groups for me) and I shoot it out to 800m weekly. There’s a recent thread about that ammo on here and pretty much everyone has good things to say about it.

I also love this ammo. Usually shoot the 147 eldms, and I use bartlein barrel, but The DT barrels honestly seem to shoot the same in my experience.

 

[srt-4_uk]

Plenty of room for a thread on. On the covert.

I'm sure hes happy to get an answer almost a decade later lol

 

[deersniper]

I'm sure hes happy to get an answer almost a decade later lol

Oh. I thought I was on last page. Must have been on first page lol. These multi hundred thread pages need their own sub forum to split this stuff up

 

[panhndl]

I ordered a SRS A2 rifle and 6.5 CM conversion kit from ES Tactical, case from case club, grip tape from Talon grips, m10-QD-L mount from American Rifle Company (40mm, 30 MOA), and I’m waiting on my Minox ZP 5-25 MR4.

 

[panhndl]

What is everyone using to change barrels? Are you using the Desert Tech torque wrench or another brand

 

[canezach]

What is everyone using to change barrels? Are you using the Desert Tech torque wrench or another brand

i've used the Borka kit for years. @kortik makes them. He's a great guy and obviously supports the Hide

 

[ChadL]

What is everyone using to change barrels? Are you using the Desert Tech torque wrench or another brand

I bought the Desert Tech maintenance kit at the same time I bought my chassis. It is a really nice kit. However, if I were shopping now I'd have to give a hard look at the Borka kit. I believe a new kit was released recently. Very nice stuff and as mentioned @kortik is good dude.

 

[Winny94]

is anyone aware of a backpack style pack that will fully encompass a covert w/ 16.5 bbl w/ brake?

 

[M77]

seekonk 70" pound T wrench

 

[gnatmm]

What is everyone using to change barrels? Are you using the Desert Tech torque wrench or another brand

Seekonk BT-2L

 

[GotM118LR]

is anyone aware of a backpack style pack that will fully encompass a covert w/ 16.5 bbl w/ brake?

Acrteryx khard 60

 

[panhndl]

i've used the Borka kit for years. @kortik makes them. He's a great guy and obviously supports the Hide

I bought the Desert Tech maintenance kit at the same time I bought my chassis. It is a really nice kit. However, if I were shopping now I'd have to give a hard look at the Borka kit. I believe a new kit was released recently. Very nice stuff and as mentioned @kortik is good dude.

seekonk 70" pound T wrench

Seekonk BT-2L

Thanks. I ordered a new and improved Borka Field Kit. It will work well with my bikes, too.

 

[jzerfoss]

What's the lowest price place to buy a Desert tech 300 wm bolt? Lowest I've found so far is $280 but are currently out of stock.

 

[jaywmustang]

What's the lowest price place to buy a Desert tech 300 wm bolt? Lowest I've found so far is $280 but are currently out of stock.

Where did u find it at that price? I’m looking for the 308 bolt

 

[panhndl]

Anyone try these?

419 Bolt Knobs

419 Finger Groove bolt knob

www.area419.com

 

[cro789]

Yes and I really like it.

 

[SupressYourself]

I'll ask the stupid question: which style fits the SRS bolt?

 

[panhndl]

I'll ask the stupid question: which style fits the SRS bolt?

Bergara or CZ

 

[Tactical_Tom]

I changed the barrel kit it on my SRS A1 twice today and the second time I heard a squeaking or a clicking sound when the bolts were close to final torque. The barrel kit has been used but the chassis was brand new and not shot before. Is it something to worry about? It didn't make those sounds the first time I installed the barrel kit.

 

[newguy2k3v2]

I changed the barrel kit it on my SRS A1 twice today and the second time I heard a squeaking or a clicking sound when the bolts were close to final torque. The barrel kit has been used but the chassis was brand new and not shot before. Is it something to worry about? It didn't make those sounds the first time I installed the barrel kit.

The screws are probably dry. Mine did it when new. I took the skins off and put grease on them.

Clamping force is increased for a given torque by lubricating the fastener but it hasn't caused me any issues

 

[ChadL]

This is going to be fun.

 

[Georgedubya]

This is going to be fun.

View attachment 7165808

Badass. I have a Proof barrel in 300 PRC and absolutely love the cartridge. You’ll have a blast with this.

 

[Tt78]

is anyone aware of a backpack style pack that will fully encompass a covert w/ 16.5 bbl w/ brake?

Price is steep but it's otherwise perfect. I ride the hog to the range some days.

TACTICAL TAILOR Quality Tactical Gear for Military and Law Enforcement

Tactical Tailor is a Veteran run, American company. We hand craft the highest quality Nylon, polymer, and Aluminum products on the market today. We have been in business since the late 90's making custom packs for our nation's soldiers, and our city's finest. If you life is worth having the...

www.tacticaltailor.com

 

[dang472]

This is going to be fun.

View attachment 7165808

When did you place your order by chance? I ordered my 22 Creedmoor barrel around September 13th.

 

[ChadL]

August 20th....it’s important to note I ordered a longer barrel, 30”, and the twist of 1:9 for 30 cal is a little uncommon yet. Took a bit longer than usual for those reasons.

 

[canezach]

Yes and I really like it.View attachment 7164704

Which thread works on the SRSA1? If I remember correctly, they changed the bolt knob threading from the gen 1 to the A1

 

[ChadL]

Badass. I have a Proof barrel in 300 PRC and absolutely love the cartridge. You’ll have a blast with this.

I'm really looking forward to developing a load for this one. I'm going to start with the Hornady 230 grain A-tips.

 

[ChadL]

I'm thinking about getting my new barrel cerakoted. Have any of you found which flat dark earth color matches the DT skins well? I had no idea there were so many variations until I started to look.

 

[NET65]

I'm thinking about getting my new barrel cerakoted. Have any of you found which flat dark earth color matches the DT skins well? I had no idea there were so many variations until I started to look.

I think the A1’s were pretty uniformly magpul FDE, but the A2’s have different shades of FDE between the coated metal and skins.

 

[ChadL]

I think the A1’s were pretty uniformly magpul FDE, but the A2’s have different shades of FDE between the coated metal and skins.

Cool.....thank you.

 

[cro789]

Which thread works on the SRSA1? If I remember correctly, they changed the bolt knob threading from the gen 1 to the A1

I think I got the Bergara and had it cut down so that the knob fit over the shaft of the handle.

 

[panhndl]

So, while you all were waiting on your rifle, did it seem to take years for it to arrive? I’m on day 11 and it feels like I ordered last century.

 

[ChadL]

So, while you all were waiting on your rifle, did it seem to take years for it to arrive? I’m on day 11 and it feels like I ordered last century.

The wait is the worst part. Well worth it though.

 

[panhndl]

I ordered a CZ 457 VPT on March 5th....
My first Defiance took 10 months.
Hope you remember you ordered by the time they call.

Well, I’m hoping they don’t have to manufacture my rifle before they send it to me.

 

[panhndl]

10 weeks and waiting. How about I trade you for your 11 days?
I have everything but the scope. 99% sure on what I’m getting just waiting until last minute incase a deal pops up in the classifieds and I can save myself some money you know.

Yeah. My scope is being manufactured by Minox and will be here in November.

 

[avalanche]

Those with a 338 lap conversion - what factory rounds have you found to be good, and those that reload, anyone want to share their recipe (first time reloader here)

 

[biffj]

I've been shooting 338 Lapua since I got the rifle in 2010. I've worn out one barrel already. I'm now running one I built from a Lothar Walther blank at 30".
I've not fired any factory stuff so no info there. I've been reloading for many years though. I would suggest you start with some basic load data and work up a load for your rifle. What works in mine may not work in yours and the factory barrels may have changed over 9 years of production. It doesn't take a lot to make things different. I've worked up some loads with the 250gr Sierra Matchkings in Lapua brass and Federal 210 match primers (not magnum) with Reloader 33 starting at 99gr to get 2950 fps in my 30" barrel. My factory barrel at 26" would be a little slower. Your barrel will likely be different too so pick a powder, bullet, brass and start at the recommended start load. Work your way up. Have a look at the reloading for long range posts to learn a bit more about ladder tests and other details to help you work your loads up. Seating depths can affect a lot of things too. Just copying a load from someone else may not be your best bet.......


Frank

 

[Vidar]

Edited, read the forum and found the info I needed.

 

[avalanche]

After some advice here. I had only one calibre up until recently (6.5cm) and just purchased a 338 conversion second hand - factory barrel etc etc. It had barely been used. I pulled my 6.5 barrel out with no issues - although I did notice the 4 side screws were very loose. I put the 338 barrel in - realised I had put it in the wrong way up... and then couldnt get it out! It was STUCK. No screws done up, no lock on etc. I managed to pull the 338 barrel out, with a fair bit of force. I put the 6.5 barrel back in with no issues, then tried to put the 338 in, which would not go in, and I didn't want to force it. Has anyone else had issues with barrels getting stuck, or not fitting?

 

[canezach]

The only time I've had an issue with my barrels has been when they were cerakoted. Sometimes the coating adds just enough to the diameter of the barrel that it causes seating difficulty until it gets worn enough to slide in and out.

 

[panhndl]

I called ES Tactical today to confirm that my dealer had sent his information to them since ES has said it would be about 3 weeks from order to shipping. My dealer had not sent his info but Eric is in the hospital getting a kidney stone removed and my rifle would be about 3 more weeks.

I really need my new toy to fondle.

 

[HiDesertELR]

Thanks to everyone that has contributed to this thread - this has to be the best resource for the SRS platform, bar none. I never ever thought I'd be an owner of one of these, but the SRS A1 liquidation that occurred mid-summer was too much to resist, even for a miser like me. No regrets. Doubt I'll have much useful information to contribute here any time soon, but at least I know where to go when I do, thanks to y'all.

I did try and post a pretty thorough Desert Tech resource list (everything from retailers, custom work and barrels, hard to find parts and tools, misc accessories, etc.) here yesterday, but maybe it violated a forum rule for postings?

 

[canezach]

I did try and post a pretty thorough Desert Tech resource list (everything from retailers, custom work and barrels, hard to find parts and tools, misc accessories, etc.) here yesterday, but maybe it violated a forum rule for postings?

I doubt it. Try posting it again

 

[HiDesertELR]

Desert Tech Data Dump... 2nd attempt

DESERT TECH OFFICIAL SITE

Desert Tech Repairs​

Desert Tech Parts​

Desert Tech Contact​

​

Desert Tech Classroom – SRS Setup, Trigger Adjustment, Caliber Conversion, Monopod Adjustment​

Desert Tech Blog – lots of good info here​

Also, scroll to bottom of page and select month/year to read more from the archives

Rifle bipods article from Frank Galli​

Rifle Scope Basics​

Ammunition Resources​

RETAILERS and/or CUSTOM BARRELS

Primal Rights​

TS Customs Precision Rifles​

ES Tactical​

DMR LLC​

SAC – Short Action Customs​

Special Purpose Rifles​

Benchmark Barrels​

Schneider Rifle Barrels​

Patriot Valley Arms​

Freedom Gunworks​

3rd Generation Shooting Supply​

Oakland Tactical​

Euro Optic​

Bison Tactical​

Optics Planet​

Copper Custom Armament​

Montana Tactical​

KF Armory LLC​

PK Firearms​

NWA Tactical​

Mid-West Gunworks​

Xtreme Guns and Ammo​

IFA Tactical​

CS Tactical​

Shooting Surplus​

PROOF RESEARCH CARBON FIBER BARRELS

Special Purpose Rifles​

ES Tactical​

MISC PARTS

Cheaper Than Dirt​

Sons of Liberty Gun Works​

BOLT KNOBS ・look for Bergara or CZ Style - metric thread, M6x1.0

Area 419 Bolt Knobs​

Twisted Barrel Bolt Knobs​

Phoenix Custom Rifles Bolt Knobs​

Bolt Fluting Bolt Knobs​

Steve Wiley - unverified if he's still making them​

Also, Search “Snipe Custom Arms“​

SINGLE SHOT SLED

MK Machining Single Shot Sled​

CHASSIS PLATE

RRS Chassis Plate for SRS A1​

ARCA RAILS - SRS A1

Sawtooth Rifles DT Rail​

Mile High Shooting RRS/ARCA Rails​

Special Purpose Rifles RRS 1.5” Rails by Sawtooth Rifles for SRS A1​

Short Action Precision ARCA Rails​

​

MLOK Specific – shouldn't be hard to find others with a search​

Area 419 M-Lok ARCA Rail​

SRS TRIGGER JOB

DT “Trigger Job” tutorial from Greg @ Primal Rights​

SRS DIFFERENCES

SRS Generation Differences from Greg @ Primal Rights​

SRS GETS BRUTALIZED

DT SRS Gets Brutalized – from Greg @ Primal Rights​

TOOLS

Borka Tools – alternative to DT Tool Kit​

Seekonk T-Handle Torque Wrenches​

Seekonk T-Handle Torque Wrench – alternate source Pro Torque Tools​

Pro Torque Tools 5mm Bit for 3/8” drive​

Barrel Extension Wrench - Tenon thread pitch 1 1/16 -16

SRS Barrel Extension Wrench – Patriot Valley Arms​

Fore-End Removal Tool

Desert Tech SRS Forearm Coupler Tool .500" ・ Midwest Gunworks​

Desert Tech Forearm Tool by Sniperhide User – 3D Printer file​

Fore-End Upgrade Kit Procedure

DT Forearm Upgrade Procedure – Euro Optic PDF​

BORE GUIDE (other)

Possum Hollow Bore Guide​

ADJUSTABLE BUTT PAD

Precision Arms Adjustable Butt Pad - not confirmed​

CHEEK RISER PADS

Hoptic USA Cheek Riser Pads​

Wiebad – Custom Cheek Riser Pads – inquire and ask for DT​

GRIP STUFF

Talon Grips DT SRS Grip Tape​

God'a grip​

Pachamayr Grip Sleeves​

GoZier Grip Sleeves​

HANDGUARD INSULATOR

Precision Underground Rifle Gear – Handguard Insulator​

MAGAZINE HOLSTER

Short Action Precision DT Kydex Magazine Holster​

Case Club Case for SRS

Case Club DT SRS Case​

AMAZON

Case Club DT SRS Case​

EBAY

Ebay listings for Desert Tech Items​

MAGNETOSPEED ADAPTOR

Magnetospeed Rail Adaptor​

FRONT TRIPOD

Precision Rifle Solutions - Front Tripod​

BULLET QUIVERS

Hoptic USA Aluminum Bullet Quivers​

Short Action Precision Fabric Bullet Quiver​

NV Clip on adaptor

Spuhr NV Clip-On Adaptor​

SCOPE MOUNTS – seen in this forum (other) - 1.5" centerline height preferred lowest for 56mm

Desert Tech Scope Mounts​

Other Brands 0-40MOA

American Defense MFG AD-RECON 40MOA​

ZRO Delta​

RRS Uni-block scope mount​

Badger Ordinance Unimounts​

American Rifle Company M10 QD-L Scope Mount​

Valdada ARC Mount​

70 MOA

Defense Solutions LLC​

35mm diameter

35mm​

YOUTUBE VIDEOS

Desert Tech YouTube Channel​

SOCIAL MEDIA PAGES

Desert Tech Rifle Shooters​

Desert Tech Facebook Page​

Desert Tech Solutions Facebook Page​

FDE Color

Cerakote H-265 Flat Dark Earth​

SEE ATTACHED FILES FOR PDFs:

• Desert Tech SRS A1 Users Manual
• Stock bolt set placement
• Primal Rights Trigger Job
• Forearm Upgrade Procedure

Let me know if there's anything that should be added or removed...

 

[M77]

Excellent stuff , thanks for doing that . Saves looking for info on 200+ pages

Enjoy your rifle and be sure to post pics

 

[Painless300]

Desert Tech Data Dump... 2nd attempt

DESERT TECH OFFICIAL SITE

Desert Tech Repairs​

Desert Tech Parts​

Desert Tech Contact​

​

Desert Tech Classroom – SRS Setup, Trigger Adjustment, Caliber Conversion, Monopod Adjustment​

Desert Tech Blog – lots of good info here​

Also, scroll to bottom of page and select month/year to read more from the archives

Rifle bipods article from Frank Galli​

Rifle Scope Basics​

Ammunition Resources​

RETAILERS and/or CUSTOM BARRELS

Primal Rights​

TS Customs Precision Rifles​

ES Tactical​

DMR LLC​

SAC – Short Action Customs​

Special Purpose Rifles​

Benchmark Barrels​

Schneider Rifle Barrels​

Patriot Valley Arms​

Freedom Gunworks​

3rd Generation Shooting Supply​

Oakland Tactical​

Euro Optic​

Bison Tactical​

Optics Planet​

Copper Custom Armament​

Montana Tactical​

KF Armory LLC​

PK Firearms​

NWA Tactical​

Mid-West Gunworks​

Xtreme Guns and Ammo​

IFA Tactical​

CS Tactical​

Shooting Surplus​

PROOF RESEARCH CARBON FIBER BARRELS

Special Purpose Rifles​

ES Tactical​

MISC PARTS

Cheaper Than Dirt​

Sons of Liberty Gun Works​

BOLT KNOBS ・look for Bergara or CZ Style - metric thread, M6x1.0

Area 419 Bolt Knobs​

Twisted Barrel Bolt Knobs​

Phoenix Custom Rifles Bolt Knobs​

Bolt Fluting Bolt Knobs​

Steve Wiley - unverified if he's still making them​

Also, Search “Snipe Custom Arms“​

SINGLE SHOT SLED

MK Machining Single Shot Sled​

CHASSIS PLATE

RRS Chassis Plate for SRS A1​

ARCA RAILS - SRS A1

Sawtooth Rifles DT Rail​

Mile High Shooting RRS/ARCA Rails​

Special Purpose Rifles RRS 1.5” Rails by Sawtooth Rifles for SRS A1​

Short Action Precision ARCA Rails​

​

MLOK Specific – shouldn't be hard to find others with a search​

Area 419 M-Lok ARCA Rail​

SRS TRIGGER JOB

DT “Trigger Job” tutorial from Greg @ Primal Rights​

SRS DIFFERENCES

SRS Generation Differences from Greg @ Primal Rights​

SRS GETS BRUTALIZED

DT SRS Gets Brutalized – from Greg @ Primal Rights​

TOOLS

Borka Tools – alternative to DT Tool Kit​

Seekonk T-Handle Torque Wrenches​

Seekonk T-Handle Torque Wrench – alternate source Pro Torque Tools​

Pro Torque Tools 5mm Bit for 3/8” drive​

Barrel Extension Wrench - Tenon thread pitch 1 1/16 -16

SRS Barrel Extension Wrench – Patriot Valley Arms​

Fore-End Removal Tool

Desert Tech SRS Forearm Coupler Tool .500" ・ Midwest Gunworks​

Desert Tech Forearm Tool by Sniperhide User – 3D Printer file​

Fore-End Upgrade Kit Procedure

DT Forearm Upgrade Procedure – Euro Optic PDF​

BORE GUIDE (other)

Possum Hollow Bore Guide​

ADJUSTABLE BUTT PAD

Precision Arms Adjustable Butt Pad - not confirmed​

CHEEK RISER PADS

Hoptic USA Cheek Riser Pads​

Wiebad – Custom Cheek Riser Pads – inquire and ask for DT​

GRIP STUFF

Talon Grips DT SRS Grip Tape​

God'a grip​

Pachamayr Grip Sleeves​

GoZier Grip Sleeves​

HANDGUARD INSULATOR

Precision Underground Rifle Gear – Handguard Insulator​

MAGAZINE HOLSTER

Short Action Precision DT Kydex Magazine Holster​

Case Club Case for SRS

Case Club DT SRS Case​

AMAZON

Case Club DT SRS Case​

EBAY

Ebay listings for Desert Tech Items​

MAGNETOSPEED ADAPTOR

Magnetospeed Rail Adaptor​

FRONT TRIPOD

Precision Rifle Solutions - Front Tripod​

BULLET QUIVERS

Hoptic USA Aluminum Bullet Quivers​

Short Action Precision Fabric Bullet Quiver​

NV Clip on adaptor

Spuhr NV Clip-On Adaptor​

SCOPE MOUNTS – seem in this forum (other)

Desert Tech Scope Mounts​

Other Brands 0-40MOA

American Defense MFG AD-RECON 40MOA​

ZRO Delta​

RRS Uni-block scope mount​

Badger Ordinance Unimounts​

American Rifle Company M10 QD-L Scope Mount​

Valdada ARC Mount​

70 MOA

Defense Solutions LLC​

35mm diameter

35mm​

YOUTUBE VIDEOS

Desert Tech YouTube Channel​

SOCIAL MEDIA PAGES

Desert Tech Rifle Shooters​

Desert Tech Facebook Page​

Desert Tech Solutions Facebook Page​

FDE Color

Cerakote H-265 Flat Dark Earth​

SEE ATTACHED FILES FOR PDFs:

• Desert Tech SRS A1 Users Manual
• Stock bolt set placement
• Primal Rights Trigger Job
• Forearm Upgrade Procedure

Let me know if there's anything that should be added or removed...

Should make this a sticky!

 

[panhndl]

Desert Tech Data Dump... 2nd attempt

DESERT TECH OFFICIAL SITE

Desert Tech Repairs​

Desert Tech Parts​

Desert Tech Contact​

​

Desert Tech Classroom – SRS Setup, Trigger Adjustment, Caliber Conversion, Monopod Adjustment​

Desert Tech Blog – lots of good info here ​

Also, scroll to bottom of page and select month/year to read more from the archives

Rifle bipods article from Frank Galli​

Rifle Scope Basics​

Ammunition Resources​

RETAILERS and/or CUSTOM BARRELS

Primal Rights​

TS Customs Precision Rifles​

ES Tactical​

DMR LLC​

SAC – Short Action Customs​

Special Purpose Rifles​

Benchmark Barrels​

Schneider Rifle Barrels​

Patriot Valley Arms​

Freedom Gunworks​

3rd Generation Shooting Supply​

Oakland Tactical​

Euro Optic​

Bison Tactical​

Optics Planet​

Copper Custom Armament​

Montana Tactical​

KF Armory LLC​

PK Firearms​

NWA Tactical​

Mid-West Gunworks​

Xtreme Guns and Ammo​

IFA Tactical​

CS Tactical​

Shooting Surplus​

PROOF RESEARCH CARBON FIBER BARRELS

Special Purpose Rifles​

ES Tactical​

MISC PARTS

Cheaper Than Dirt​

Sons of Liberty Gun Works​

BOLT KNOBS ・look for Bergara or CZ Style - metric thread, M6x1.0

Area 419 Bolt Knobs​

Twisted Barrel Bolt Knobs​

Phoenix Custom Rifles Bolt Knobs​

Bolt Fluting Bolt Knobs​

Steve Wiley - unverified if he's still making them​

Also, Search “Snipe Custom Arms“​

SINGLE SHOT SLED

MK Machining Single Shot Sled​

CHASSIS PLATE

RRS Chassis Plate for SRS A1​

ARCA RAILS - SRS A1

Sawtooth Rifles DT Rail​

Mile High Shooting RRS/ARCA Rails​

Special Purpose Rifles RRS 1.5” Rails by Sawtooth Rifles for SRS A1​

Short Action Precision ARCA Rails​

​

MLOK Specific – shouldn't be hard to find others with a search​

Area 419 M-Lok ARCA Rail​

SRS TRIGGER JOB

DT “Trigger Job” tutorial from Greg @ Primal Rights​

SRS DIFFERENCES

SRS Generation Differences from Greg @ Primal Rights​

SRS GETS BRUTALIZED

DT SRS Gets Brutalized – from Greg @ Primal Rights​

TOOLS

Borka Tools – alternative to DT Tool Kit​

Seekonk T-Handle Torque Wrenches​

Seekonk T-Handle Torque Wrench – alternate source Pro Torque Tools​

Pro Torque Tools 5mm Bit for 3/8” drive​

Barrel Extension Wrench - Tenon thread pitch 1 1/16 -16

SRS Barrel Extension Wrench – Patriot Valley Arms​

Fore-End Removal Tool

Desert Tech SRS Forearm Coupler Tool .500" ・ Midwest Gunworks​

Desert Tech Forearm Tool by Sniperhide User – 3D Printer file​

Fore-End Upgrade Kit Procedure

DT Forearm Upgrade Procedure – Euro Optic PDF​

BORE GUIDE (other)

Possum Hollow Bore Guide​

ADJUSTABLE BUTT PAD

Precision Arms Adjustable Butt Pad - not confirmed​

CHEEK RISER PADS

Hoptic USA Cheek Riser Pads​

Wiebad – Custom Cheek Riser Pads – inquire and ask for DT​

GRIP STUFF

Talon Grips DT SRS Grip Tape​

God'a grip​

Pachamayr Grip Sleeves​

GoZier Grip Sleeves​

HANDGUARD INSULATOR

Precision Underground Rifle Gear – Handguard Insulator​

MAGAZINE HOLSTER

Short Action Precision DT Kydex Magazine Holster​

Case Club Case for SRS

Case Club DT SRS Case​

AMAZON

Case Club DT SRS Case​

EBAY

Ebay listings for Desert Tech Items​

MAGNETOSPEED ADAPTOR

Magnetospeed Rail Adaptor​

FRONT TRIPOD

Precision Rifle Solutions - Front Tripod​

BULLET QUIVERS

Hoptic USA Aluminum Bullet Quivers​

Short Action Precision Fabric Bullet Quiver​

NV Clip on adaptor

Spuhr NV Clip-On Adaptor​

SCOPE MOUNTS – seem in this forum (other)

Desert Tech Scope Mounts​

Other Brands 0-40MOA

American Defense MFG AD-RECON 40MOA​

ZRO Delta​

RRS Uni-block scope mount​

Badger Ordinance Unimounts​

American Rifle Company M10 QD-L Scope Mount​

Valdada ARC Mount​

70 MOA

Defense Solutions LLC​

35mm diameter

35mm​

YOUTUBE VIDEOS

Desert Tech YouTube Channel​

SOCIAL MEDIA PAGES

Desert Tech Rifle Shooters​

Desert Tech Facebook Page​

Desert Tech Solutions Facebook Page​

FDE Color

Cerakote H-265 Flat Dark Earth​

SEE ATTACHED FILES FOR PDFs:

• Desert Tech SRS A1 Users Manual
• Stock bolt set placement
• Primal Rights Trigger Job
• Forearm Upgrade Procedure

Let me know if there's anything that should be added or removed...

Thank you! Gives me something to do while I wait for my rifle

 

[goosed]

Thank you! Gives me something to do while I wait for my rifle

You should add that entire post to the resources section rather than letting it get lost in this mega thread that is near impossible to sift through.