Official (DTA) SRS, HTI, Covert, Hunter Thread

#13,751
Haha, wants his DTA to be more like a Savage...:LOL:
Now that we have that out of the way, I've had this problem occasionally too. You don't have to move that bolt knob up much. Just a little bump with your forearm as you're repositioning the rifle, and your 'bang' turns into a 'click'.
I know @coldboremiracle does a lot of hunting with an SRS. Any advice out there besides be more mindful / careful?
 
  • Like
Reactions: coldboremiracle
#13,753
Coyote Kev said:
Anybody want to talk about bumping the bolt problems? When I'm prone shooting prairie dogs or sitting coyote hunting I tend to bump the bolt knob with my right forearm and it opens it slightly. Just enough so that when you pull the trigger you get a click instead of a bang. So then you have to run the bolt and put another round in to shoot. The geometry of the SRS bolt location seems to cause this problem. I wish it locked closed with the safety on like a savage. This is annoying when shooting P dogs but damn near cost me a coyote. I can't trust it as a coyote rifle. Anybody else have this problem? Can anything be done?
Click to expand...
You dont have to rechamber a new round, all you have to do is lift the bolt and drop it, the round never has to move from the chamber. You can avoid the issue by training, check the bolt just before firing and learn to avoid bumping it.
 
Last edited:
  • Like
Reactions: waveslayer, jlficken, Blueoval56 and 5 others
#13,758
It was asked before with no response so maybe it doesn't exist but is there a plug to fill the hole left if you take the monopod out? I tried google but the only result that came up was some airsoft shop in Germany
 
  • Like
Reactions: Mr. Z
#13,759
ChidJ said:
It was asked before with no response so maybe it doesn't exist but is there a plug to fill the hole left if you take the monopod out? I tried google but the only result that came up was some airsoft shop in Germany
Click to expand...

yes. Dta makes one.

image.jpg
 
#13,762
FWIW, Midwest Gunworks tends to have a lot of the nitty gritty parts for the SRS series:
www.midwestgunworks.com

Gun Parts

Shop Thousands of In Stock Gun Parts for new or obsolete rifles, pistols & shotguns from popular brands like Browning, Sig Sauer, Remington, Winchester, Marlin, HK, FN America & many more ready to ship to your door.
www.midwestgunworks.com www.midwestgunworks.com
 
  • Like
Reactions: Raven34
#13,764
Can anyone point me in the direction
Where can I find a Aluminum pic rail for my SRS-A1
I know Primal Rights made one a while back.
I would like to find one if someone has one you would like to sell let me know.

​


Thank you In advance.
Joseph
 
  • Like
Reactions: Blueoval56
#13,768
Strykervet said:
Heavy because he uses SS. Cost less because he uses SS. Performance-wise they're peerless in the same ways TBAC is. Dale does really great custom work too. I use his .338 Sierra and .50 Alpha, the Sierra is a thread over brake. Super nice people with excellent CS.

.338. He custom cut the MRAD barrel in order to fit the brake. Everything is indexed TDC despite being a thread over. The BMG thread on is the same way (and the brake is too so it doesn't require shims if you swap in the field or range).

MRAD barrel and can:
View attachment 7607961
View attachment 7607962
View attachment 7607963

.50HTI w/Elite can. Elite makes the brakes for Harris, so this one also has a Harris brake that's indexed the same way the can is. Some people think it's not worthwhile to suppress a BMG. Bullshit! It's really the only way I wanna shoot this thing.
View attachment 7607964


I THINK he makes lighter cans now but I'm not privy to all the new stuff?

But yeah, those two above are certainly built like tanks. The baffles on the BMG look like 3/4" thick! I think he uses 316SS exclusively for these two, he may use an exotic for the blast baffle only though, but don't quote me on that. The BMG can is quite a bit heavier than the .338 FWIW. The .338 can ain't light but it's not as heavy as it looks either.
Click to expand...
That is an awesome setup! How is the felt recoil from the HTI .50 with the Elite Iron on there? I still shoot my Serbu BFG50 but with an Armalite AR50 brake on it.
 
#13,770
^ maybe mine did as well. I know for sure that I got the sling stud but now that you say it came with a magpul rail section... maybe it did

Edit: forgot to provide an update. Desert Tech never responded to my request for a monopod plug. I ended up buying the Custom Smith Manufacturing version
 
  • Like
Reactions: HenryTheAce
#13,771
wcopp said:
Well let me know if they get back to you, I sent a request with no response. I also only found the airsoft ones.
Click to expand...
I've sent them a few messages myself a couple months ago and still have not heard from them. I would say your best bet would be to call them. I'm sure they have been busy with orders and with all this stupid covid restriction crap.
 
#13,772
rob.sfo said:
It's time for me to move beyond a single conversion for my A2 Covert...and I'm looking for some validation of my choice... :)

I currently run a 16" 308 (ES-Tactical), it's a laser and I love it (1/4" groups on paper at 300, bangs steel at 1k all day, super handy in the woods and drops hogs & deer just fine).

However, I just competed in my first long-range match (NRL Hunter), and it did me no favors on unknown distance targets (furthest was 1025 yards) in 20-25 mph wind, from less-stable positions. I've learned a ton about wind with my shorty 308 but I'd like something that cuts through it now. :)

So I'm looking for a good compliment to my current setup, with the following priorities:
  1. Hunting NA big game (mostly deer, pigs, hopefully elk at some point).
  2. Occasional field-style matches.
  3. Access to a range (a few times a year) with steel out to 1 mile.
I reload. I would prefer a shorter barrel (in the 18-22 inch range) to keep it handy in the woods/mountains (and it's an SRS Covert so go short or go home). If possible I'd skew a little more towards barrel life over maximum velocity, but this isn't critical.

As of right now I'm leaning towards 300 PRC or 300 Norma. Does anyone have any strong opinions between these two, given the above context? Anything else I should be considering?

Pic for fun.

View attachment 7596071
Click to expand...
You should take a look at doing a 6.5 SAUM as well. I have one in a 24" for my SRS. Use DMR for those, faster turn around time once he gets some barrels in. I also have the 300 PRC. I like them both, but for a match the recoil is way less with a SAUM
 
#13,773
How common is it for DT bolt gun owners to modify their safety bar to allow more creep elimination? There is a lot more creep in this trigger than any I've felt. It's got creep like an H&K 90 series rifle. It goes very light, though. I'll surely increase the pull weight.

As for DT's comms, I haven't been able to reach them in months. They must be very busy.
 
#13,774
I modified mine, made a huge difference. Now my trigger is as good as my TT Primary. I also welded a metal tab in the skins for the overtravel.
I mean you can also buy a spare safety tab before you experiment. Pretty easy part to replace.
 
#13,776
Twinsen said:
How common is it for DT bolt gun owners to modify their safety bar to allow more creep elimination? There is a lot more creep in this trigger than any I've felt. It's got creep like an H&K 90 series rifle. It goes very light, though. I'll surely increase the pull weight.

As for DT's comms, I haven't been able to reach them in months. They must be very busy.
Click to expand...
Twinsen said:
How common is it for DT bolt gun owners to modify their safety bar to allow more creep elimination? There is a lot more creep in this trigger than any I've felt. It's got creep like an H&K 90 series rifle. It goes very light, though. I'll surely increase the pull weight.

As for DT's comms, I haven't been able to reach them in months. They must be very busy
Click to expand...
Twinsen said:
How common is it for DT bolt gun owners to modify their safety bar to allow more creep elimination? There is a lot more creep in this trigger than any I've felt. It's got creep like an H&K 90 series rifle. It goes very light, though. I'll surely increase the pull weight.

As for DT's comms, I haven't been able to reach them in months. They must be very busy.
Click to expand...
There is a really good how to on Gunhive
 
  • Like
Reactions: Twinsen and st1650
#13,783
Hi all. Am in the process of getting carbon barrels spun up for two A2 chassis in NZ. The two barrel extensions we were supplied will not fit the bolts we received. A test with other SRS bolts showed it was definitely an issue with the extensions and not the bolts. New barrel extensions have since been supplied and work fine. Has anyone heard of anything similar happening in relation to the barrel extensions.
 
#13,784
Happened to me too. Gen 1 bolt wouldn't fit into a gen 1 extension, but it fit fine in a gen 2 extension. I sent the barrel and bolt in and they said my bolt was out of spec because it didn't fit into any of their gen 1 extensions either.
I thought that was odd because before I sent it in I did some measurements and the gen 1 extension's top hood was slightly wider than my gen 2's, not allowing the bolt to fully twist and seat.
 
#13,791
Blueoval56 said:
Thanks for the quick reply guys, just snagged an Area 419 finger groove bolt knob to try out. Not sure if I’m going to like it more than the standard ball or not but it was a barely used one for $15 so I figured it was worth a try.
Click to expand...
That's actually the one I've had on my 308 bolt for a few years. I had a different one at first that had the threads recessed a bit in the knob so the top of the knob was close to the bend, but even with blue loctite, it kept breaking loose. The finger groove knob extends a bit further out, but I haven't had it break loose once since I got it.
 
  • Like
Reactions: Blueoval56
#13,792
Kirt McKenna over on Facebook under desert tech rifle shooters has a pretty cool mag sled that he's come up with. He has a couple different sizes. Standard and HTI. The HTI fits awesome in my rifle, it fits 375ct all the way up to 50bmg same sled. I just thought I'd help the guy get his product in the hands of shooters. Awesome guy to deal with.

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com

Hope this helps someone out.

Xdeano
 
  • Like
Reactions: Blueoval56 and M77
#13,800
Sportin Wood said:
I've watched the video on the rifle's details but it doesn't have any info on when it will be available to the consumer, either LE or public.
Click to expand...
They did a Livestream or virtual shotshow type deal this year and said they were opening the m2 up for civi sales. Seems like they're backordered on EVERYTHING though. I wouldn't mind picking one up eventually.
 
You must log in or register to reply here.

Similar threads

P
Firearms Desert Tech SRS and HTI Sale
Replies
2
Views
666
PRDRIVER
P
bender338
WTB WTB: DTA SAC 223 Conversion Kit
Replies
6
Views
331
bender338
bender338
Beasler1
Extra cant for ZCO420?
Replies
2
Views
148
DeathBeforeDismount
DeathBeforeDismount
S
Cartridges that work well super AND subsonic
Replies
14
Views
392
snowplow
S
Hoser
DTA Covert Mystery
Replies
28
Views
2K
Dragoon300
Dragoon300
Top Bottom
Back
Home
Forums
Merch
Alerts