I took my bottom metal off last night and guess what warped as **** so I got up today and got my supplies from a local metal shop. I got 6in of 1/2in aluminum bar stock for $5 and some jb kwik for $7.xx. Here is how it went
I drilled the front and rear lug holes to fit the 1/2in pillar
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_112334_zps43f9cf1a.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_112402_zpsbae43156.jpg)
Marked the pillar to the correct length then cut with a hack saw, drilled the hole with the drill press and finished it up with a file.
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_120046_zps21a63afa.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_115217_zpsa940c1f7.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_125120_zpsf77852a6.jpg)
The middle lug was too long so I made another one (not pictured)
Waxed everything I didn't want JB Kwik on(I think I went a little overboard buy better safe than sorry)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_144931_zps030ae32a.jpg)
Everything stuck together
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_132755_zps6146b717.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_151934_zps3172f788.jpg)
I put the action back in after everything had set up and you can see the pencil line I made to where the receiver was stock and it's the same.
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_125637_zps6d0bfb4c.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_125601_zps49a2f704.jpg)
I drilled the front and rear lug holes to fit the 1/2in pillar
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_112334_zps43f9cf1a.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_112402_zpsbae43156.jpg)
Marked the pillar to the correct length then cut with a hack saw, drilled the hole with the drill press and finished it up with a file.
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_120046_zps21a63afa.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_115217_zpsa940c1f7.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_125120_zpsf77852a6.jpg)
The middle lug was too long so I made another one (not pictured)
Waxed everything I didn't want JB Kwik on(I think I went a little overboard buy better safe than sorry)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_144931_zps030ae32a.jpg)
Everything stuck together
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_132755_zps6146b717.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_151934_zps3172f788.jpg)
I put the action back in after everything had set up and you can see the pencil line I made to where the receiver was stock and it's the same.
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_125637_zps6d0bfb4c.jpg)
![](http://i174.photobucket.com/albums/w103/futurerider103/Guns/IMG_20130821_125601_zps49a2f704.jpg)
Last edited: