Range Report Poor mans XM3

[Asm1]

The poor mans XM3 savage10 factory McMillan's A3 bedded by myself 18.5" barrel with AAC black out and a AAC7.62SD WARN 20MOA base and WARN split fixed lowest available rings,NXS 3-5X15X50 MLR/MILLRAD ZEROSTOP.

factory barrel 1 in 10 twist cut at 18.5"...

CAN on or off no velocity increase,But there is a pressure increase can on if I run the ragged edge.

I have some loads that are stout,But are not for more than 10 rounds before they make ejector marks,I wont list them ..

tmp 77
M118LR brass
44gr RL15
175MK
210 M
2540FPS great accuracy .6 average at 565 yards

M118LR brass
42gr RL15
190MK
210M
2400FPS
under MOA could use some tweaking to get it where I would want it at 43gr it went 2540 and felt funny of extraction no marks,but give it some 90's temp and I bet it will ejector mark..Felt fine no can


I will list more when I go molly on some 175's and see what it does.. I have some 155scenar data I will dig up and post later.

 

[7mmRM]

Re: Poor mans XM3

Looks good!

 

[81sfo]

Re: Poor mans XM3

nice set up man!

 

[lostriverproductions]

Re: Poor mans XM3

nice!

 

[Asm1]

Re: Poor mans XM3

Thanks Guys,its a handy little rifle..
Did the molly 175's thanks Gunfighter14e2 for meeting me and loaning me some 175's your the MAN !

M118LR brass
175 MK Molly
45gr RL15
210M
2650FPS no preasure in 80's temp shot 15 in one setting easy on extraction.

.75 MOA at 565 yards



155 scenars
2750 worked great for 900 rounds,Then went to a comp a killed all the brass I took load fell apart,Sun cooked our ass.

lapua brass
155 scenars naked
45.5 RL15
210M

.6 or.7 average load