Very interested in a MDT J Allen. Always liked the originals but wasn't in the position to buy one when they were available. Just got a new rifle here a month ago now and I can't decide if I throw a cheap stock on it for the time being or just go with something good and sell it when the new J allens come out.
-
Having trouble using the site?
Contact support
Possible JAE news?
- Thread starter Sil17sd
- Start date
Easier to recoup more of your money and sell it easier if you go with something good
Bought a used JAE-700 for my comp rifle, had never seen one in real life before as it's super rare on this side of the pond and just had to have it.
That build quality is hard to beat, and it got quite a few innovative things going for it.
Not tested it yet tho as i'm still waiting for the new optics for the rifle...
But from just playing around with it at home, i'm pretty sure i will buy another one for the next build when MDT gets them to the market.
I do hope they add some threaded screw holes or keylocks at the fore end for weights, that's the only thing i'm missing as it's quite back heavy even with the original super long(6" i believe) Arca rail. Still trying to figure out a way to solve it on my chassi, without drilling and tapping holes.
That build quality is hard to beat, and it got quite a few innovative things going for it.
Not tested it yet tho as i'm still waiting for the new optics for the rifle...
But from just playing around with it at home, i'm pretty sure i will buy another one for the next build when MDT gets them to the market.
I do hope they add some threaded screw holes or keylocks at the fore end for weights, that's the only thing i'm missing as it's quite back heavy even with the original super long(6" i believe) Arca rail. Still trying to figure out a way to solve it on my chassi, without drilling and tapping holes.
Sawtooth rifles makes side rails to replace the factory ones, sawket rail, i think they call them that are mlok so you can attach mlock weights to them
Edit: here's the link to them
SAWKET™ insert rails for the JAE-700™
SAWKET™ insert rails replace the side rails on compatible JAE-700™ chassis to allow adding M-LOK™ weights and accessories.
www.sawtoothrifles.com
Sawtooth rifles makes side rails to replace the factory ones, sawket rail, i think they call them that are mlok so you can attach mlock weights to them
Edit: here's the link to them
SAWKET™ insert rails for the JAE-700™
SAWKET™ insert rails replace the side rails on compatible JAE-700™ chassis to allow adding M-LOK™ weights and accessories.www.sawtoothrifles.com
Mine is an older generation so no side rails on it.
Probably just going to get some holes drilled so i can screw on some MDT weights, makes it more usable anyway and it's not something i plan to sell in the near future.
Seems like all the matches over here is cancelled until this corona issue is solved so i have plenty of time to figure it out.
Yeah, sounds like yours is a first generation JAE (mine is the same, and #17 IIRC).
Yeah probably.
I saw now that It has predrilled holes in the metal part of the fore end, so just need to drill the polymer and make custom fit weights for it. Also looks like a cut out for nuts inside at each hole so should be an easy fix.
Can any JAE owners verify that an Impact and or a Bat TR actions will fit in a late gen chassis without mods??? I currently run 591’s in both of mine and looking to change
TIA
TIA
Impact will drop right in as well with no problems.
Thank you, I did get with Lisa and she told me the Impact was a go but didn't think the Bat TR hanger would clear. I have Mark @ SAC checking a TR this week if he still has a JAE in the shop. Thanks again for the replies and pic's
Man these stocks look good. Can't wait until they are re-released. Fingers crossed!
Hopefully its sooner than later. My mausingfield is waiting for it to finish a 223 build, super stoked
Wouldn't hold your breathe. You're better off getting a different stock and shooting your mausingfield for the next ~1-2 years until they come out
Krgs have this feature. Although not as goodGoing to have to agree as well, the JAE was way ahead of it's time.
Case in point: Been trying to get a 224 Valkyrie to feed reliably out of a MDT 6BR mag. I kept having the third round, tip the fourth round forward, buggering up the mag. It was so common I had about given up ever using it in a local Tact LR match. Yesterday I was sitting in my office, looking at the rifle hanging on the wall and realized (duh), the JAE chassis it sat in had an adjustable mag well. And since I had noticed a lot of up and down slop in the mag, pulled it down, and tightened up the magazine fit (up/down) to the action. Grabbed a handfull (10 or so) of rounds, loaded the mag, and cycled the action. Boom. Fed like shit through a goose. Grabbed the other 6BR mag (both had the feed lips mod'ed to the Valkyrie dimensions), and boom, it fed like nobody's business as well. All from adjusting the presentation of the magazine to the action. Can't do that with other chassis, even today. It's also (IIRC) why the JAE can run AW or AICS mags; you just tweak the mag latch up or down. If all the other chassis had this functionality, then @padom wouldn't be having to deal with all the folks asking questions about feeding the .224 V or Thunderbird from an AICS patterned mag.
I often wonder, since now that MDT owns the rights, if they will expand the mag collet/mag latch adjustability function to all of their chassis. @MDT_Josh , another thought perhaps to consider(?)...it'd certainly be a discriminator for MDT's products. (Sorry, thinking like this, is my day job too.)
KRG has front to back adjustments, but not vertical. I have most of the (now) older chassis (XLR, KRG, JAE etc).
It has front to back and they do an extended mag catch that's designed to be filed down to the right hight. Like I said not as good but the same result accures with a little more work
Tagging for Intrest.
Quality doesn’t come cheap, but money doesn’t grow on trees. I don’t think there would be harm in two versions. That is if it’s even possible.
I have a Cadex Strike Nuke being installed on my Vudoo build. I would give the JA/MDT a very hard look on my long range setup I am planning to do soon.
Quality doesn’t come cheap, but money doesn’t grow on trees. I don’t think there would be harm in two versions. That is if it’s even possible.
I have a Cadex Strike Nuke being installed on my Vudoo build. I would give the JA/MDT a very hard look on my long range setup I am planning to do soon.
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
That is the goal for sure!
It is looking really good for 2021; make sure you are signed up for the newsletter!
-Anthony
It is on the "to-do" list for the R700 SA, but I am not sure what the timeline looks like just yet unfortunately.
Josh
I would love if there were cheek pieces available for the original jae700. I bought a used one with the previous owners info engraved on the cheek piece and I would love to be shooting my own rifle without someone else into on it lol. First world problems, right? Lol
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
It's hard to say exactly, it should be this year, but we're not in a position to provide anything concrete. But once we are there, we will be making it known for sure!
We did change the cheek piece, but it might work on the original versions; we will be doing some test fitting in the coming time.
-Anthony
Or are they not even doing a cage system and integrating it like the rest of their chassis milled right into the backbone
That would be a shame. The ability to remove a cage and barreled action wholesale and replace would be clutch
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Right now, it's likely the removable cage system won't be a thing for us. But we won't be certain until everything is approved and running. But keep in mind there will be a ton more information available closer to launch.
-Anthony
Edited to fix poor wording.
-Anthony
Edited to fix poor wording.
Last edited:
I really like MDT and Josh who represents here....but that was my first thought also.
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
It's not about cost; we are located in Canada, so trying to get a chassis back here to change the cage is not super practical, right, but it's also not confirmed.
It's not confirmed that we are removing it for sure, but outside of that, we haven't removed anything. We've changed a few things around to make it easier to manufacture and made some updates that were requested like the LOP has gone shorter, and we are adding a vertical grip and an angled grip as well. And keep in mind this project is still in progress, so things do change as it goes on.
-Anthony
EDITED to fix the wrong word.
Last edited:
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Yes, that would be cool, but from what we understand, that wasn't the case, and the cage change had involvement with very specialized tooling and wasn't able to be performed at your house.
And always keep in mind as well this may be something that happens later on; with JAE our goal is first to get back into production and getting the timelines and price point down. But development always goes on in parrelel in the background. Sometimes we need to chain @MDT_Josh back to his desk so he can keep working to make stuff like this possible!
-Anthony
Fixed cage reference
Last edited:
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Right, my mistake, it's so new to us. I always get the cage and collets backward, and at this point, we aren't that far in yet. There is still a long way to go, so keep checking back with us, and for right now, the 700 SA is the focus, so there will be more information available. And I've just realized my original wording on what I said was wacky, so I'm going to update that for clarity.
And to add a bit more, we've only been working on the 700 version right now. Tikka should be started on soon.
-Anthony
Last edited:
Here you go fellas.
www.altusshooting.com
Brands - J Allen Enterprises - ALTUS Shooting Solutions
J Allen Enterprises is a leader in manufacturing the highest quality precision rifle chassis.
www.altusshooting.com
Similar threads
Precision Rifle Gear
Added weight to JAE-700
