Powder IN-STOCK thread

#2,053
www.midsouthshooterssupply.com

Hodgdon Retumbo Smokeless Powder 8 Lbs

Hodgdon Retumbo Smokeless Powder 8 Lbs by HODGDON , IMR & WINCHESTERThis magnum powder was designed expressly for the really large overbored cartridges such as the 7mm Remington Ultra Magnum, 300 Remington Ultra Magnum, 30-378 Weatherby Magnum, etc. RETUMBO adds 40-100 fps more velocity to...
www.midsouthshooterssupply.com www.midsouthshooterssupply.com
 
  • Like
Reactions: Deleted member 173458
#2,062
it-happens.jpg
 
  • Like
Reactions: Stache and MRADical
#2,068
Last edited:
#2,069
1 Lb in stock for both, too rich for me @ 49.99 each

shop.hodgdon.com

Hodgdon H4350®

H4350 is an extruded propellant in our Extreme series that has been one of our most popular powders with shooters for decades. During that time, Hodgdon has modernized H4350 by shortening the grains for improved metering and making it insensitive to hot and cold temperatures. H4350 is ideal in...
shop.hodgdon.com shop.hodgdon.com

shop.hodgdon.com

Hodgdon VARGET®

Varget is an extruded propellant in the Hodgdon line of Extreme series of powders. Varget features small, extruded grains for uniform metering, is insensitive to hot and cold temperatures and produces higher energy for improved velocities over other powders in its burning-speed class. The...
shop.hodgdon.com shop.hodgdon.com
 
  • Like
Reactions: Bravo6niner
#2,070
BuLLet said:
1 Lb in stock for both, too rich for me @ 49.99 each

shop.hodgdon.com

Hodgdon H4350®

H4350 is an extruded propellant in our Extreme series that has been one of our most popular powders with shooters for decades. During that time, Hodgdon has modernized H4350 by shortening the grains for improved metering and making it insensitive to hot and cold temperatures. H4350 is ideal in...
shop.hodgdon.com shop.hodgdon.com

shop.hodgdon.com

Hodgdon VARGET®

Varget is an extruded propellant in the Hodgdon line of Extreme series of powders. Varget features small, extruded grains for uniform metering, is insensitive to hot and cold temperatures and produces higher energy for improved velocities over other powders in its burning-speed class. The...
shop.hodgdon.com shop.hodgdon.com
Click to expand...
For 2lbs, they wanted to charge $48 for shipping and hazmat. I guess I’ll wait till my LGS has it.
 
  • Like
Reactions: Crosswind, Schütze, Islas82 and 1 other person
#2,072
Choked up the price for the varget.

Hodgdon also had cfe223 limit 5#.
Getting good results with it in 223 but could not get very good results in 308 with it 1moa at best.

I just checked Hodgdon last nite and both showed out.

Guess just a dice roll.
 
#2,076
reloadingunlimited.com

CCI No. 34 - 7.62 NATO-Spec Large Military Rifle Primers | 1,000 Count

CCI No. 34 - 7.62 NATO-Spec Large Military Rifle Primers CCI No. 34 primer is more sensitive, easier to seat, and more compatible with progressive and automated loading equipment than even before. CCI primers have always incorporated modern non-corrosive and non-mercuric initiator mixes...
reloadingunlimited.com reloadingunlimited.com
CCI no. 34
Never used them, but some of you might care.
 
Last edited:
  • Wow
  • Haha
Reactions: Eddystone and Jack's Dad
#2,088
They're all I use in 6.5x47L and precision .223REM loads. They're really only necessary with large magnum cartridges in colder weather, from what I remember. A lot of precision folks use them for more consistent ignition, but you should dial back your load ever so slightly if you switch to using a magnum primer for testing - they can run a bit hotter.
 
  • Like
Reactions: Islas82
#2,093
Nope, there haven't been any patterns I've noticed. Some places seem to release stock first thing in the morning, others later or in the afternoon. The one pattern I see is with Alliant and Vihtavuori: when a big supplier like Midway, Natchezss, or Brownells releases a bunch of stock, that means the others and the smaller places will be getting a similar drop within a week or two. But it's not guaranteed.

So use the Discord channel for in-stock notifications, and track stock at your favorite suppliers multiple times a day if you can (and I guess you can check this thread, but it might just be people talking about powder and not actually notifying in-stock).
 
  • Like
Reactions: Anb618 and The D
#2,094
What should I be paying for RL23 these days?

Unfortunately I am new to reloading, so I have no real choice but to be bent over a little.... but I'd prefer its just a little.
 
#2,096
Dogtown said:
$30 is a steal, $40 is about average, $50 is desperate pricing. This goes for all of the foreign powders these days. Western Powders (Ramshot, Accurate, etc stays around $30-ish for single pounders)
Click to expand...
Thanks man. Figured as much from some google searching - local shop wants me to pay 46 all in (after taxes).

Dont seem to have much of a choice. Midsouth and others seem to be cheaper, but the odds I get it are probably tiny.
 
#2,097
Dogtown said:
Nope, there haven't been any patterns I've noticed. Some places seem to release stock first thing in the morning, others later or in the afternoon. The one pattern I see is with Alliant and Vihtavuori: when a big supplier like Midway, Natchezss, or Brownells releases a bunch of stock, that means the others and the smaller places will be getting a similar drop within a week or two. But it's not guaranteed.

So use the Discord channel for in-stock notifications, and track stock at your favorite suppliers multiple times a day if you can (and I guess you can check this thread, but it might just be people talking about powder and not actually notifying in-stock).
Click to expand...
^This

I’ve also noticed it seems like after a few places post up available 1lb jugs, sometime within the next two weeks we see another drop of 8lb jugs of the same powder.
 
  • Like
Reactions: The D
#2,098
R_Swanson said:
Thanks man. Figured as much from some google searching - local shop wants me to pay 46 all in (after taxes).

Dont seem to have much of a choice. Midsouth and others seem to be cheaper, but the odds I get it are probably tiny.
Click to expand...
You have to factor in the hazmat costs too. That can be another $20+ on top of shipping, which is why pre-pandemic, we would often buy a bunch of powder all at once, a couple times a year. This is also why if you can get the powder you need locally, it's often the best option.
 
  • Like
Reactions: Im2bent
#2,099
R_Swanson said:
Thanks man. Figured as much from some google searching - local shop wants me to pay 46 all in (after taxes).

Dont seem to have much of a choice. Midsouth and others seem to be cheaper, but the odds I get it are probably tiny.
Click to expand...
Don’t forget to add hazmat fee for ordering. A hazmat of $20 or more will make the local price better for only a pound or two.
(I typed too long!!!)
 
#2,100
Dogtown said:
You have to factor in the hazmat costs too. That can be another $20+ on top of shipping, which is why pre-pandemic, we would often buy a bunch of powder all at once, a couple times a year. This is also why if you can get the powder you need locally, it's often the best option.
Click to expand...

bmash said:
Don’t forget to add hazmat fee for ordering. A hazmat of $20 or more will make the local price better for only a pound or two.
Click to expand...

For sure... I think most of the hazmat fees I've been hit with recently were $30 +? Maybe I am exaggerating, but I overpaid for some H4350 from Hodgon yesterday and the fee was 40, and I want to say Midway was 30 when I got some primers.

But yeah - after fees, shipping and tax I think Midsouth and even Midway would still be cheaper... but not enough it makes a big difference. Beggars cant be choosers. I decided I wanted to build a 7SAUM in 2019 and put off the reloading part of it because life got in the way... then COVID happened and I figured I'd wait it out. I have some hunts this year and I just need to suck it up at this point.

What really has me concerned is getting ADG brass. I have orders in but didnt get any last time they made it.
 
You must log in or register to reply here.

Similar threads

T
Precision 6.5 CM - What would you change about my process?
Replies
88
Views
3K
Oldloser
O
S
Help: 6.5 Creedmoor - 140 Grain ELD-M & Vihtavuori N555 Load Data & Tips
Replies
13
Views
2K
bigboss91
bigboss91
T
New to non SAAMI Loads- 7x300Win ANY/ALL advice needed and greatly appreciated.
Replies
21
Views
473
Schw15
S
R
Hunting for a repo M40 walnut stock (my Beaver156 repo stock got slightly damaged)
Replies
14
Views
1K
Random Guy
R
USMCSGT0331
2024 Christmas gift thread (#2)! Please read instructions to participate!
Replies
153
Views
7K
stanley_white
stanley_white
Top Bottom
Back
Home
Forums
Merch
Alerts