I'm so nervous right now looking at the BP barely holding onto the deck rail... lol... Awesome setup
-
Having trouble using the site?
Contact support
Screw the rifle...... Where do you live??
That's an understatement!! Awesome creativity from build to build. Keep 'em coming!
A new pic of my same ole rifle:
It does ok I guess with accuracy:
Maybe next weekend I can add a third plaque.
It does ok I guess with accuracy:
Maybe next weekend I can add a third plaque.
Rifle is on point. The shooter is not... 
.338 LM...
.338 LM...
Last edited:
Received all the parts from Go Big Tactical early morning.
Defiance Ruckus SA
Manners TCS stock
PVA prefit 6.5 Creed M24 26”
Area 419 muzzle brake
Trigger tech diamond 2 stage
Couldn’t be more happy with build!
Defiance Ruckus SA
Manners TCS stock
PVA prefit 6.5 Creed M24 26”
Area 419 muzzle brake
Trigger tech diamond 2 stage
Couldn’t be more happy with build!
I built both of these from parts acquired here on the hide accept for the bipod
308 build
Trued Remington 700 action
22" 308 remage barrel
MPA muzzle brake
MPA BA comp chassis
Timney Calvin Elite trigger
6.5 CM build
Ptg/Stiller TAC30 action
Proof research 24 inch bull barrel carbon fiber
MDT chassis
Jewel trigger
PVA muzzle brake
308 build
Trued Remington 700 action
22" 308 remage barrel
MPA muzzle brake
MPA BA comp chassis
Timney Calvin Elite trigger
6.5 CM build
Ptg/Stiller TAC30 action
Proof research 24 inch bull barrel carbon fiber
MDT chassis
Jewel trigger
PVA muzzle brake
First chassis rifle, ready to take the step and build a custom one now.
Remington 700 .308
MDT TAC 21
Vortex 6-24
Bowers VERS 30
.5 MOA with handloads
Remington 700 .308
MDT TAC 21
Vortex 6-24
Bowers VERS 30
.5 MOA with handloads
Today was a beautiful morning, and nothing better then sitting at home, go to the range.
This my Mossberg 223/556, shooting at 100 yards at the range.
This my Mossberg 223/556, shooting at 100 yards at the range.
Hey, this is my first post but been lurking these forums for awhile. I’m completely new to long distance shooting and only have a entry level Ruger Precision Rifle but have taken a course which helped a lot, most importantly with recoil management and trigger pull as well as dialing in my ballistics calculator.
As a new shooter with a entry rifle I was able to get sub-MOA groups still. Furthest range I have here in Los Angeles is 600 yards which is very boring, going to look for a longer distance range even if it’s going to be a big of a drive.
As a new shooter with a entry rifle I was able to get sub-MOA groups still. Furthest range I have here in Los Angeles is 600 yards which is very boring, going to look for a longer distance range even if it’s going to be a big of a drive.
Nice shooter.Hey, this is my first post but been lurking these forums for awhile. I’m completely new to long distance shooting and only have a entry level Ruger Precision Rifle but have taken a course which helped a lot, most importantly with recoil management and trigger pull as well as dialing in my ballistics calculator.
As a new shooter with a entry rifle I was able to get sub-MOA groups still. Furthest range I have here in Los Angeles is 600 yards which is very boring, going to look for a longer distance range even if it’s going to be a big of a drive.
California Tactical academy has a 1000 yard range in LA. I have not shot there yet
Or You can go down to Pala. They have an 850+ yard range
Thanks! Never even heard of them until your post and they’re close by.
So hes taken to protecting his ball with your gun.
He may have gotten tired of playing fetch.
He may have gotten tired of playing fetch.
different guns should have different post
6 digit M40 - at 400 yards
Noveske N4 18”
Hart barreled 30-06
Noveske N4 18”
Hart barreled 30-06
6.5 cm, remy 700 SA, ptg bolt, remington prs chassis, TT trigger, sure fire muzzle, 14.5" shileen barrel, Leupold tmr 3x9, sig folding brace, oal 36" and 28" folded. Weights 9lbs as configured. It's perfect with a can
This is exactly the type of set-up I dig. Thanks for the info!6.5 cm, remy 700 SA, ptg bolt, remington prs chassis, TT trigger, sure fire muzzle, 14.5" shileen barrel, Leupold tmr 3x9, sig folding brace, oal 36" and 28" folded. Weights 9lbs as configured. It's perfect with a can
Just mounted a little scope on my 22.
Last edited:
Sent from my iPhone using Tapatalk
What is the purpose of the fluted barrel? Looks or cut down on weight a few oz?
Increase rigidity? In one word no. Vs the same blank before fluting? Hell no. Vs a non fluted lighter profile that weighs the same as the fluted barrel? Maybe. But only in that case.
Cool factor? For sure. Check out some of @LongRifles Inc. patterns. They are cool factor out the wazoo.
Taken from here. I don't own fluted.
GUNSMITHING SERVICES: Barrel Fluting
Notes regarding barrel fluting: Barrel fluting is a machining process that is very dependent upon well-executed work holding. We have a well-vetted process for ensuring a visually clean appearance in our finished work. Please note that IF your barrel is coated, blued, blasted, or "finished"...
www.longriflesinc.com
Reducing material cannot make it more rigid.
McWhorter 6.5 Ackley Improved
Group is at 500yds, IIRC winds were 15mph gusting to 25mph
Group is at 500yds, IIRC winds were 15mph gusting to 25mph
My first bolt action build,
-.308 16.5” Rem 700 barrel, trigger, and action
-NF 20 MOA rail
-AICS AT 2.0 chassis (thumbhole skins en route)
-Harris S 6”-9” bipods
-Badger USMC rings
-Bader mini tactical bolt knob installed
-Steiner T5XI 3-15 x 50mm
-SF MB762SSAL/RE muzzle brake
-SF FA762SS on order
3 round group shot with M118LR
-.308 16.5” Rem 700 barrel, trigger, and action
-NF 20 MOA rail
-AICS AT 2.0 chassis (thumbhole skins en route)
-Harris S 6”-9” bipods
-Badger USMC rings
-Bader mini tactical bolt knob installed
-Steiner T5XI 3-15 x 50mm
-SF MB762SSAL/RE muzzle brake
-SF FA762SS on order
3 round group shot with M118LR
Attachments
I was in Stockholm, shooting the best competition of the year this past saturday, Sommarträffen 2020.
Here I am, shooting steel at 1000 meters with my TRG22, chambered in .308 winchester, no less. Using my handloads with Lapua Scenar L 175 grain bullets.
Oh, and I would have used other pants, had I not forgotten them at home, about a 7 hour drive away...
The hawaii t-shirt is however mandatory, I have used it at that competition 3 years in a row now.
Here I am, shooting steel at 1000 meters with my TRG22, chambered in .308 winchester, no less. Using my handloads with Lapua Scenar L 175 grain bullets.
Oh, and I would have used other pants, had I not forgotten them at home, about a 7 hour drive away...
The hawaii t-shirt is however mandatory, I have used it at that competition 3 years in a row now.
Last edited:
gr
I have not shot the rifle in many years, possibly when the weather cools off a bit here, I will load up some rounds and try it from the bench!
I still have all the reloading components and equipment around here somewhere.
If the groups are not too embarrassing, will post them.
I have only used the Gilkes-Ross in competition, never tried it from a bench.
20+ years ago, I was an active Service Rifle competitor, used an M1A built for me by Clint Fowler.
The younger guys all had AR’s and scored better, but I like the M1A, as I carried an M14 in the Army in the 60’s.
Switched to Match Rifle when I became too old and creaky for Service Rifle.
Thus Mike Ross built the Match gun for me.
So I was organizing the safe(s) and decided to take a group picture of my current rifles. I keep think of building another one... I dont know if I need anther one right now. I need to take some time off work and shoot them!!
I need more Manners stocks... this makes me feel poor. Off the PX
I just work constantly and live on a remote Alaskan island... this is just one of my outlets...
Oh I’m buying another one... come handjobs or highwater
I shoot both fluted and non fluted barrel precision rifles. Other than slight reduction in weight and possible a tad quicker barrel cooling due to increased surface area of barrel, I see no difference between the two types that affect accuracy.
