Precision Rifles.....show em!!

[Lil Casino]

GA Precision Templar V2/ Deviant 6.5cm
24" Bartlein GAP6 contour 1:8
TT 5x25 Gen3XR
Spuhr 4302
Bix N Andy Tac Sport Pro 2 stage
TBAC Ultra 7
PRS height Ckyepod

 

[rustyinbend]

My Barret MRAD at the COSSA "Buffalo Range" on Thursday where I stretched the 6.5 barrel out to 1,400 yards. Central Oregon is an amazing place to shoot, and the COSSA range is the best of the best. I also have MRAD barrels in .300 WinMag, .308 Win, and .338 Lapua. But this session was with my three 6.5 Creedmoor rifles to determine which one I was going to sell. The problem is that all three were super accurate and fun to shoot (MRAD, Tikka T3x TAC A1, and LWRCI REPR). Decided to keep them all. BTW ... the Lyman rubber pad and the Atlas bipod spikes is a great bench-shooting combination for avoiding "muzzle movement" ... first attempt with this and spotting misses was super easy. The real test is this combo with the .338 barrel .... next time.

 

[JC0352]

 

[BuLLet]

Scoped this today, bore sighted @ 200 yards, first group on paper. GAP Templar II in a Foundation Stock.

5 Round group after 2 to get on paper from bore sighting. Factory ELD 108.

 

[Abbotm2]

Old 700 got a face lift, Barting med Palma in 6.5cm cut to 22” and cerakoted in desert sand. Sitting in a McRees

 

[Silkysmooth]

Simple build...
RPR .308
Leopold mark 6, 3x18, first focal, H-59
Leopold rings
Harris bipod

 

[RFutch]

New chassis showed up today. Not sure why these aren’t more popular but I love this thing.

 

[Shootnwrench]

My TCS showed up. So stoked with how this turned out. Was in an MPA, now she’s got some soul.

ARC Mausingfield
PVA Prefit 6.5 Creed M24 26”
PVA Jet Blast brake
Manners TCS - GAP Camo
Atlas Cal w/ Area419 Arca adapter
TriggerTech Diamond
NF ATACR 7-35FFP Mil-XT
ARC rings
ARC mags w/LRI followers

 

[SweaterDood]

Just finished assembling it tonight:

Defiance Tenacity XM
25” Bartlein Heavy Varmint
McMillen Z10 in Dark SU Camo
APA RTG w/ MDT 15rd Mags
Vortex Razor HD 5-20x50 EBR-2B
Leupold Rings
Triggertech Diamond 2 Stage
Barrel work and Brake by Meredith Rifles
Chambered in .257 AI w/ extra FB for the Blackjack 131gr Ace

 

[Gustav7]

Kelbly's Atlas Tactical
Proof Steel 24" Sendero Lite - 223AI
KRG X-Ray chassis
Bix n Andy TacSport 2-Stage trigger
Steiner Px4i 4-16 (for now)
Tab Gear rear bag
GGG bipod (for now)

 

[Vexent]

Desert Tech SRS A1 in .338 lapua and a 6.5 creedmoor conversion

RAZOR® HD GEN II 4.5-27X56 FFP EBR 7C MRAD

MPA mount

Magpul bipod

 

[Michigangunner]

Savage 110 tactical in an mdt lss with razor hd 5-20x50

 

[BuLLet]

Shot this for the second time today. It has about 30 rounds total through it now. All factory Hornady 108 ELD-X. This was my second group from today @ 200 yards.

GAP Templar II
Bartlein 6mm Creedmoor
Foundation Stock
Zero Comp 4x20

 

[CORam]

Newest Build.
Bighorn Origin Action
Benchmark 24" Rem Varmint
Masterpiece Arms Chassis
Triggertech Diamond 2 Stage
Chambered In 223 Ackley Improved

View attachment 7445261

Very nice rifle! This is out of left field but what muzzle brake is that?

 

[huntnh]

Great looking rifle and good shooting that one hell of a 200 yard group

 

[CShooter92]

Very nice rifle! This is out of left field but what muzzle brake is that?

Looks like the Insite Heathen brake

 

[6.5 GUY]

260 Rem
SAC Gen II Alpha 11 action Melonited
Surgeon bottom metal, AW mag
Hawk Hill 27" 1:8" 4 groove M24/40 bbl.
Bedded in a Manners T4A and Painted flecktarn by CGC
TT Diamond trigger
Bushnell ERS 3.5-21x50 (Used LE scope) in APA rings.

Sierra 142 SMK, F210M, 42.3 H4350, in Lapua brass @ 2.8650" 2,850 f/s shot prone @ 377 yards (1.20" 3 shot group .320" MOA). I bought the gun used this month so I'm not wanting to hammer too many rounds down the barrel since I have no idea how many have already gone down it? I do plan on competing with it though next year.

 

[pmclaine]

260 Rem
SAC Gen II Alpha 11 action Melonited
Surgeon bottom metal, AW mag
Hawk Hill 27" 1:8" 4 groove M24/40 bbl.
Bedded in a Manners T4A and Painted flecktarn by CGC
TT Diamond trigger
Bushnell ERS 3.5-21x50 (Used LE scope) in APA rings.

View attachment 7454665

Sierra 142 SMK, F210M, 42.3 H4350, in Lapua brass @ 2.8650" 2,850 f/s shot prone @ 377 yards (1.20" 3 shot group .320" MOA). I bought the gun used this month so I'm not wanting to hammer too many rounds down the barrel since I have no idea how many have already gone down it? I do plan on competing with it though next year.
View attachment 7454667

Who uses Abe Lincoln as a target?

 

[BuLLet]

That silhouette looks more like a guy with a scarf around his neck!

Who uses Abe Lincoln as a target?

 

[pmclaine]

That silhouette looks more like a guy with a scarf around his neck!

Who uses Dr Birks as a target?

 

[BuLLet]

Thank you! The ducks all lined up for that one

Great looking rifle and good shooting that one hell of a 200 yard group

 

[RuskRaiser]

Assembled at home. Trued Remington 700 action from NSS. McGowan 26" barrel. KRG Bravo chassis. EGW 20 MOA rail. Vortex PST Gen II 5-25x50. Home assembled can. Accurate mag.

 

[CORam]

Shot this for the second time today. It has about 30 rounds total through it now. All factory Hornady 108 ELD-X. This was my second group from today @ 200 yards.

GAP Templar II
Bartlein 6mm Creedmoor
Foundation Stock
Zero Comp 4x20

View attachment 7454118

View attachment 7454119

View attachment 7454120

I'll echo and say nice group! What barrel contour is that?

 

[BuLLet]

Thanks! It's a GAP #7.

I'll echo and say nice group! What barrel contour is that?

 

[inclementweather]

PMAC Precision 6.5 Creedmoor

 

[Shawn Sinclair]

I have a 6BR Bighorn tl2 with a Burris xtr3. Also 6.5 creedmore Stiller built with US optics er25

 

[Tacovrd]

A lot of inspiring builds here. Hopefully I'll be able to contribute to this thread soon.

 

[akmike47]

Better picture of the new rifle. Have a Calvin elite trigger on the way.
View attachment 7455440

Almost had a good 5rd group at 100 yesterday until I sucked

4 shots grouped with a low left flyer(shit shot)

I need to measure it, I forgot to yesterday. The target is 3".

 

[Julle]

Here´s my Tikka M590. Rebarreled to 260 Rem. Barrel turned to Sako TRG profile with 6 flutes, McMillan A5, Steiner M5Xi 5-25x56 MSR2, Optilock mounts, Ase Utra Jet-Z Compact suppressor.

 

[Tucker11bravo]

I know these have been done before; however, I just built this one up today for our PRS style comps we are starting to have here Down Under.
It is a Remington 700 SPS Tactical AAC-SD 20in 1:10 .308 Win in a KRG X-Ray chassis with a Nightforce NXS 5-25x56 Mil-dot (it is the same scope and rings from my post above on my 300) with a LaRue 20 MOA rail and a Harris bipod (Swivel and notched legs). I still want a couple of other parts for it, but for now this is how it stands.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i639.photobucket.com\/albums\/uu117\/HRT47\/PRS%20Rifle.jpg"}[/IMG2]

Why the 1 in 10??? My rifle has a 26" bull with 1 in 11.25. Shoots one slightly ragged whole at 200 yards.

 

[Semper_Fi]

Elegant very clean

 

[Semper_Fi]

Scoped this today, bore sighted @ 200 yards, first group on paper. GAP Templar II in a Foundation Stock.



View attachment 7448695

View attachment 7448696

View attachment 7448698

5 Round group after 2 to get on paper from bore sighting. Factory ELD 108.

View attachment 7448699

Very nice group - hope to get there some day!

 

[Semper_Fi]

Remington 700 in 30-06
A.I. Legacy 2.0
SS 24" Krieger 11.25 twist

View attachment 7448119View attachment 7448120View attachment 7448122View attachment 7450137

NICE !

 

[Longrangeprecision762]

18" Noveske
Vortex 1-8 Gen 2
Geissele SSA-E trigger
LMT stock
Harris with LaRue Mount
Surefire M951 with a 1000 lumen led conversion

More of a bolt gunner, but this gun has been with me for a long time and still gets the job done.

 

[Longrangeprecision762]

NICE !

Thank you my friend. You'll have to shoot it one of these days

 

[akmike47]

View attachment 7458650
18" Noveske
Vortex 1-8 Gen
Geissele SSA-E trigger
LMT stock
Harris with LaRue Mount
Surefire M951 with a 1000 lumen led conversion

More of a bolt gunner, but this gun has been with me for a long time and still gets the job done.

I have the poors version.

 

[akmike47]

How does that rifle equate to the poors version? Looks pretty slick to me. Plus I don't think I've seen many in the poors class with a $200 tax stamp can.

It ain’t no fancy Noveske that automatically makes your pecker grow 3” longer. It’s nothing special the barrels a 18” Ballistic Advantage, I shoot 75gr BTHP on CFE223

 

[candyx]

I have the poors version.

Freedom Rifle a lot of us trapped behind enemy lines can only dream about having a can for our rifles, hard to believe we live in the same Country...

 

[SweaterDood]

How does that rifle equate to the poors version? Looks pretty slick to me. Plus I don't think I've seen many in the poors class with a $200 tax stamp can.

This probably doesn’t fit into the poors category either since it has a Shilen barrel and Trijicon glass... but it was only $275 before we started dinkin around with it!

-Savage Axis
-Sheet metal/spoon/door-stopper spring Stock savage non-accutrigger
-Boyd’s Varmint stock
-Shilen Select Ratchet 4groove
-25-06AI 1:7tw
-Accupower 4.5-30
-NF rings
-Magpul bipod
-Dish towel cheekpiece mod

 

[akmike47]

Freedom Rifle a lot of us trapped behind enemy lines can only dream about having a can for our rifles, hard to believe we live in the same Country...

Pretty stupid we can’t easily protect hearing and keep down noise pollution. If my truck had no muffler I’d probably get a ticket

 

[akmike47]

I'm more of a does it work than run it kind of guy and less of a what does it say on the side of the receiver. There's probably a difference in parts that we chose but on the whole your's looks very similar to mine as far as base rifle goes. One of mine is a rebuilt S&W M&P Sport II and the other is a complete Frankenrifle. Both are great rifles that I wouldn't trade for 3 Noveskes.
View attachment 7458702

I prefer my frankenrifles honestly, hard to beat Aero upper/lowers for the money and a BA barrel. Obviously there’s better stuff but it works for my budget. My rifle is Aero upper with a lower out of north Texas a small shop made. I see you’re also a BCM KMR whore, it’s the only forend I buy they just feel good.

 

[wareagle700]

 

[Longrangeprecision762]

Love the curly/tiger maple spacer
Very nice.

- Jon

 

[Tokay444]

I have a 6BR Bighorn tl2 with a Burris xtr3. Also 6.5 creedmore Stiller built with US optics er25View attachment 7456080

Awwww. Look kids! The mommy and daddy rifles are about to make baby rifles.

 

[OREGUN]

Weatherby vanguard SA,
6.5 CM, 8 twist, heavy varmint, 24” Krieger, chambered and brake timed at krieger
XLR elements gen 1
Gets whatever scope I decide to put on it. Currently a vortex viper pst gen 1

 

[FrozenMinnesotan]

I like how this pic turned out.

View attachment 7434354

that a jcs composites stock?

 

[JC0352]

that a jcs composites stock?

Manners

 

[PrecisionRifleGuy]

Why the 1 in 10??? My rifle has a 26" bull with 1 in 11.25. Shoots one slightly ragged whole at 200 yards.

That's the barrel that comes on them mate. It is designed for the heavier pills.

 

[Digger0051]

Hi everyone. New here and happy to post my new rifle. Savage 110 Precision Elite in 6.5 Creedmore. It has Burris rings and an Athlon Ares scope 4.5-27 x50. I am taking it out this weekend to see how it shoots. Any tips on breaking it in?

 

[LeftyJason]

Hi everyone. New here and happy to post my new rifle. Savage 110 Precision Elite in 6.5 Creedmore. It has Burris rings and an Athlon Ares scope 4.5-27 x50. I am taking it out this weekend to see how it shoots. Any tips on breaking it in?

Welcome!

Run a dry patch or boresnake down the bore and then go shoot it. Also a good idea to make sure everything is torqued properly first.

Wise words from TheGerman.