Are you very tall? That's a long LOP with the folding stock adapter and all those LOP plates. I ask because I need a short-ish LOP and have put off the folding adapter because it adds around 1.75" to the LOP. Amazing build by the way!
Are you very tall? That's a long LOP with the folding stock adapter and all those LOP plates. I ask because I need a short-ish LOP and have put off the folding adapter because it adds around 1.75" to the LOP. Amazing build by the way!
Nope, My son is 6'4, but I seemed to have gotten my Mom's height gene. I wanted the short buttstock, but none of those were available as MDT 2nds, and I didnt want to pay full price. Those MDT sales are amazing. I picked up a Tac21 for a bit over $200!
Anyway, I solved the LOP problem by reversing the offset mount on the scope. I also swapping the Lite stock with my SRS V5 stock, which has a shorter LOP.
By the way, using adhesive backed felt or rubber on the cold hard plastic of the cheek riser works wonders to keep your face warmer in cold weather.
Anyway, I solved the LOP problem by reversing the offset mount on the scope. I also swapping the Lite stock with my SRS V5 stock, which has a shorter LOP.
By the way, using adhesive backed felt or rubber on the cold hard plastic of the cheek riser works wonders to keep your face warmer in cold weather.
Attachments
Beautiful rifle, I've always liked how that stock looks great on any action/barrel/glass combo...
Tikka T3X 6.5 CM
Proof Carbon Pre Fit Barrel
KRG Whiskey Folder
Vortex Razor
Proof Carbon Pre Fit Barrel
KRG Whiskey Folder
Vortex Razor
Tikka T3X 6.5 CM
Proof Carbon Pre Fit Barrel
KRG Whiskey Folder
Vortex Razor
godamn that’s a beautiful gun. Is that at Coleman’s?
Barrel length and overall weight? Sick rig.Tikka T3X 6.5 CM
Proof Carbon Pre Fit Barrel
KRG Whiskey Folder
Vortex Razor
Awesome yeah it’s an amazing range. I was really impressed when I went. I only get to make it out there a few times a month but it’s great every time I go. Hands down one of if not the best long distance ranges in nc
Did a little long range shooting yesterday. Once my rangefinder shows up, I want to get some groups on steel at 400yds to see how much improvement I need. Wearing her 6.5cm barrel and an Ultra 9.
D
Deleted member 110994
Guest
Here's my 2021 rig
Curtis Vector
24in Proof SS 7.5 twist chambered in 6mm BRX
Thunderbeast 30BA
Triggertech Diamond
Gen 2 4.5-27x56 EBR-2C
Spuhr
MPA Matrix
The thing is an absolute hammer with the 110 SMK
Curtis Vector
24in Proof SS 7.5 twist chambered in 6mm BRX
Thunderbeast 30BA
Triggertech Diamond
Gen 2 4.5-27x56 EBR-2C
Spuhr
MPA Matrix
The thing is an absolute hammer with the 110 SMK
Just a few toys:
408 Cheytec, CA 338 titanium, can cannon, Benelli M4
408 Cheytec, CA 338 titanium, can cannon, Benelli M4
How are you liking the matrix chassis? I have the BA comp chassis, do you find any noticeable difference or willing to upgrade? Thx
D
Deleted member 110994
Guest
So far I love it. I switched from a KRG though and have never run the BA. My only complaint it the cheek rest doesn't go high enough for my Optic set up. Nothing a Wiebad cheek rest pad wont solve. Really like the grip/trigger finger spacer combinations. You can get the feel dialed to your liking and a very repeatable trigger squeeze.
Here are my two built this year.
Rem 700 in 300WM
-Trued and blueprinted
-AI L118A1 chassis
-20" 5R barrel
-Timney trigger
-Badger rings
-Leupold Mark5HD
-Badger bolt handle
Rem 700 in 6.5 Creedmoor
-Trued and blueprinted
-M16 extractor
-KRG X-ray chassis
-22" Bartlein barrel
-Triggertech diamond
-Leupold rings
-Leupold Mark4(temporarily)
-KRG bolt knob
Rem 700 in 300WM
-Trued and blueprinted
-AI L118A1 chassis
-20" 5R barrel
-Timney trigger
-Badger rings
-Leupold Mark5HD
-Badger bolt handle
Rem 700 in 6.5 Creedmoor
-Trued and blueprinted
-M16 extractor
-KRG X-ray chassis
-22" Bartlein barrel
-Triggertech diamond
-Leupold rings
-Leupold Mark4(temporarily)
-KRG bolt knob
A 20" braked 300 Win Mag. I bet you get lots of friends on the range when you bring it!
Haha! I shoot it with a Dead Air Sandman-S, it's miserable without itA 20" braked 300 Win Mag. I bet you get lots of friends on the range when you bring it!
Haha! I shoot it with a Dead Air Sandman-S, it's miserable without it
I have a 300 Win Mag as well. When I put a brake on it I was amazed on just how loud a gun can get. And I run a 29" barrel on mine, cant imagine what a 20" would feel like.
Im on my second suppressor on it now, killed the first one and got an Ase Utra SL7 BL for it, Finish quality all steel suppressor. It tames it pretty well.
My 300 Win Mag with a KRG chassis. Had to try it. It is normally bolted to an AICS AT chassis.
Oh it hurts, it's like a punch to the front of your noggin. What suppressor were you running? And man, that is a killer looking rifle. How are you liking the whiskey 3?
I can imagine.
Im in Sweden so it was a domestic brand, alloy and titanium lightweight suppressor (the one in the picture) it died after about 1200 rounds of hot 300 Win Mag loads. The KRG Whiskey 3 is a favourite. I have their rear folder on my TRG22 as well. KRG is good to go.
But my Win Mag was built to resemble a Mark 13 mod 5 so in my head it needs to stay in the AICS AT.
Hi everybody! I'm Gabriel.
My current baby is a customized Sako TRG-21/22 in .308 (my 21 is a last of production model that not so strangely came with several TRG-22 features, the barrel is stamped 21 but is threaded, the forestock is a 22, and it came with the picatinny rail like a 22).
I've added an AWC Hyper-dyne II muzzle break, added two anschutz to picatinny rail adapters to the bottom rail - one for my BD strap, the other for the custom picatinny to Arca-Swiss tripod mount I designed & built), I custom sculpted the grip to perfectly fit my fingers, added a digicamo finish, designed/built a carbon-fiber rail cheek riser, and topped it off this past week with an ATN X-Sight 4k Pro 5x20 with Advanced Ballistics Laser range finder (ABL-1500).
I'm eventually going to add a .223 Tikka (probably the T3 Tac A1) to have a lighter caliber tac driver - the TRG with scope and bipod is a heavy beast.
Looking forward to being a helpful/productive member of this community!
Cheers everyone!
My current baby is a customized Sako TRG-21/22 in .308 (my 21 is a last of production model that not so strangely came with several TRG-22 features, the barrel is stamped 21 but is threaded, the forestock is a 22, and it came with the picatinny rail like a 22).
I've added an AWC Hyper-dyne II muzzle break, added two anschutz to picatinny rail adapters to the bottom rail - one for my BD strap, the other for the custom picatinny to Arca-Swiss tripod mount I designed & built), I custom sculpted the grip to perfectly fit my fingers, added a digicamo finish, designed/built a carbon-fiber rail cheek riser, and topped it off this past week with an ATN X-Sight 4k Pro 5x20 with Advanced Ballistics Laser range finder (ABL-1500).
I'm eventually going to add a .223 Tikka (probably the T3 Tac A1) to have a lighter caliber tac driver - the TRG with scope and bipod is a heavy beast.
Looking forward to being a helpful/productive member of this community!
Cheers everyone!
Attachments
I was able to get out shooting this last weekend and take my Tac A1 in 6.5cr to 900m and my Seekins Precision build in 5.56 to 500m.
Thanks! Its the warmest looking picture of 15 'F and 18mph wind I have.Nice rigs! Thanks for sharing!
7 Saum built by Rbros on a Stiller predator action, 26” proof sendero, Mesa precision altitude stock, jewell trigger at 2lbs, Hawkins obendorf bdl, and a APA little bastard. 20 moa rail with Zeiss precision rings and a Zeiss v6 5-30x50. It’s an absolute tack driver at 9lbs 8oz scoped. I’ve taken it to 1530 yards so far with relative ease. Shoots the 180 Berger’s at 3010 FPS.
Who wants to sell their Long Action build with a Manners stock in Sage Flat??
I was at the range today, its been a while but the rifle performs.
Its my Sako TRG22 with all the bells and whistles, like a Delta Stryker HD, Spuhr mount, Ase Utra SL7 BL suppressor and KRGs fantastic folding rear stock.
Its my Sako TRG22 with all the bells and whistles, like a Delta Stryker HD, Spuhr mount, Ase Utra SL7 BL suppressor and KRGs fantastic folding rear stock.
Greetings,
Not a chassis to be seen, but would ride the river with any of these. L-R, Rem 700, M40-A1 return stock in .243win, Mcbros built Rem 700 .308, M70 McM A-5 .260rem, M70. 30/06 McM Dunlap stock, and a M70 .300wm in McM Winchester marksman stock.
John
Not a chassis to be seen, but would ride the river with any of these. L-R, Rem 700, M40-A1 return stock in .243win, Mcbros built Rem 700 .308, M70 McM A-5 .260rem, M70. 30/06 McM Dunlap stock, and a M70 .300wm in McM Winchester marksman stock.
John
Hi,
Revision number 3 of receiver and chassis system.
Finally ready for production after a few programming tweaks are made, along with standardizing the screws and such as much as we can.
Sincerely,
Theis
Revision number 3 of receiver and chassis system.
Finally ready for production after a few programming tweaks are made, along with standardizing the screws and such as much as we can.
Sincerely,
Theis
