I thought maybe that was it. I didn't realize they had concrete benches at the 1000 yard range now.
Can you give us some more specs on your 22 GT. Barrel length, twist, velocity your running those 95's at? Thanks, been working on putting together a 22 GT and still trying to hammer out some details.
26” kreiger Heavy Varmint 4G barrel
6.5tw
Custom throat for 90gr atips (originally planned for these bullets until finding out after chambering it that 6.5tw is too fast)
Running 3150fps with h4350 and CCI 450 in necked down and neck turned 6GT alpha brass. Getting 5.4mil to 1k in northern Colorado.
My next barrel will be a Bartlein CFW 26” barrel 7tw and in their new material as I don’t foresee the current one lasting super long.
6.5tw
Custom throat for 90gr atips (originally planned for these bullets until finding out after chambering it that 6.5tw is too fast)
Running 3150fps with h4350 and CCI 450 in necked down and neck turned 6GT alpha brass. Getting 5.4mil to 1k in northern Colorado.
My next barrel will be a Bartlein CFW 26” barrel 7tw and in their new material as I don’t foresee the current one lasting super long.
My two favorite bolt guns in the safe to shoot. Top is a return MK13 kit in 300wm, waiting on a used MARS to arrive at the house for it. Lower is a 6.5 creedmoor built on another MK13 SA chassis.
6.5 PRC
Terminus Apollo Lite/Ti
XLR Element 3.0 Magnesium
Bartlein carbon barrel
TriggerTech Diamond 2-Stage
ZC420
Dear Air Nomad
Little barricade work with the Valkyrie today.
How is your 419 rail attached to the spigot on the MPA chassis?
It's an MPA specific 419 rail, that bolts onto the older model spigots, or, flush with the newer model spigots.
Here's one on my backup match rifle, for those pouring rainy days, lol:
What scope (Athlon I'm assuming)? And more importantly, what parallax wheel is on the parallax wheel?
No it’s a SWFA SS 5-20. The parallax gripper is from Aadland Engineering and makes a huge difference.
My new one… Keith at Phoenix Precision Rifles built it. TL3 with 20” Proof Sendero, Triggertech Diamond, Bushnell DMR2pro, seekins rings, Area 419 brake, Atlas bipod, grayboe bottom metal and Renegade stock cerakoted Patriot Brown with black specks.
Attachments
Tried out a new GAP I got back in May, Tempest (my 2nd) in a Manners TCS.
6 GT, 107 SMK, 34.5 grains of H4350, CCI 400 Primers
Had some rounds left from a batch of 100 I loaded up for testing with another rifle. A few shots to zero and my first 5 on paper @ 200 yards.
6 GT, 107 SMK, 34.5 grains of H4350, CCI 400 Primers
Had some rounds left from a batch of 100 I loaded up for testing with another rifle. A few shots to zero and my first 5 on paper @ 200 yards.
Our Son’s 6GT, just put together. Savage action (he’s a lefty) Criterion Barrel, XLR Magnesium chassis, Leupold LRP scope and bases (these were the bases he had on hand but planning on going back to medium height bases). Undecided on whither to use a brake or a suppressor. Probably will also change grip.
Also pictured is the first 100 yard group the rifle fired.
Also pictured is the first 100 yard group the rifle fired.
Last edited:
Latest project almost wrapped up. Impact 737, tt diamond flat shoe, benchmark 6bra 1:7.5 twist mtu 26” with a heathen brake and a KS heavy varmint 1:7.5 twist 6mm blank, Lapua brass and will be going in an mpa comp chassis for now until I decide which stock/chassis it will reside in.
Vudoo v22 got an makeover with a krg whiskey 3 gen 6 enclosed and a new element optics nexus 5-20x50
Vudoo v22 got an makeover with a krg whiskey 3 gen 6 enclosed and a new element optics nexus 5-20x50
Last edited:
FN SPR Action, Benchmark Sendero 6.5cr in a Manners T4, with a FDN17 scope. It has an adjustable magnetic quick detach cheekrest, of my own design and manufacture.
That's a sweet setup, and a cool design. Thanks for sharing.FN SPR Action, Benchmark Sendero 6.5cr in a Manners T4, with a FDN17 scope. It has an adjustable magnetic quick detach cheekrest, of my own design and manufacture.
They are Mossberg 223/556, and Ruger 17HMR.
Built this onr for a buddy
300 prc
bighorn tl3
proof
bastard brake
triggertech trigger
ag composit stock
leupold vx6 scope
300 prc
bighorn tl3
proof
bastard brake
triggertech trigger
ag composit stock
leupold vx6 scope
that is niceNothing fancy here, just a dressed up Tikka T3x CTR chambered in 6.5 creedmoor.
Tikka T3x CTR chambered in 6.5 Creedmoor
Manner's T6A inlet for the CTR bottom metal
Spuhr 20moa mount
Vortex Razor 5-20x50
Area 419 Hellfire brake
Harris Bipod with Hawk Hill feet
Sterk bolt knob
Just wrapped this guy up. Will be my NRL Hunter Open under 12# rifle and animal wackin stick.
-Smithed by Alpha and Omega (Caleb is awesome!)
-Impact Titan
-Hawkhill M24 fluted by LRI
-Manners LRH in "black on black"
-Hawkins rings and bottom metal
-March 4.5-28x52
-Gold TT Diamond
-Cerakote by, yours truly
-Smithed by Alpha and Omega (Caleb is awesome!)
-Impact Titan
-Hawkhill M24 fluted by LRI
-Manners LRH in "black on black"
-Hawkins rings and bottom metal
-March 4.5-28x52
-Gold TT Diamond
-Cerakote by, yours truly
Last edited:
LongRifles Inc has some unique CNC fluting options.
CNC fluting and it dropped nearly 2lbs. Barrel is finished at 23" and weighs in at 50.8oz pretty damn close to a proof sendero at 24"
Last edited:
