Not shooting it like much of a precision rifle this morning but it looks the part
Nothing too crazy. Ive own this chassis and action since 2010 now. Over the year jsut barrel replacement and optic upgrade. Its not the best in the word but it was there for me in times of stress and just bad times. Probably spent more than I needed to and the action isnt the greatest but it taught me a lot. It exist because I joined SnipersHide way back in 2010 maybe earlier.
savage 12 action with carbon manners stock. started as a 308 now a 6.5.
savage 12 action with carbon manners stock. started as a 308 now a 6.5.
I learned a lot from Savage rifles and would have no trouble buying another. Nice looking setup.
This Tikka T3X CTR 260rem, that has put thru the barrel way over 4000 shot´s still shoots like a new.
For sure the Whiskey chassis is a big part of it.
It has had GRS, MDT and few different KRG chassies on it, but i have found that the Whiskey is for men, like the drink is
Barrel and bolt are fluted, otherwise the action is factory, only trigger is from TAC A1, the 2-stage model, and then cerakoted to OD green.
Whiskey is cerakoted to Finnish military M05 camoflauge, like my Varusteleka outfit
Really like it, and how nice it is to handle with the folding stock.
For sure the Whiskey chassis is a big part of it.
It has had GRS, MDT and few different KRG chassies on it, but i have found that the Whiskey is for men, like the drink is
Barrel and bolt are fluted, otherwise the action is factory, only trigger is from TAC A1, the 2-stage model, and then cerakoted to OD green.
Whiskey is cerakoted to Finnish military M05 camoflauge, like my Varusteleka outfit
Really like it, and how nice it is to handle with the folding stock.
Are you Passion for Rifles on IG?This Tikka T3X CTR 260rem, that has put thru the barrel way over 4000 shot´s still shoots like a new.
For sure the Whiskey chassis is a big part of it.
It has had GRS, MDT and few different KRG chassies on it, but i have found that the Whiskey is for men, like the drink is
Barrel and bolt are fluted, otherwise the action is factory, only trigger is from TAC A1, the 2-stage model, and then cerakoted to OD green.
Whiskey is cerakoted to Finnish military M05 camoflauge, like my Varusteleka outfit
Really like it, and how nice it is to handle with the folding stock.
View attachment 7689656
Yes. Yes he is. Also youtube. And its a little hard for him to take pictures for you unless you happen to be in Finland.
I can come to States, if some one will pay the tickets
.
Canada is about to be the next Australia. I’m hoping to be gone to the US by the new year.
started as a savage 110FCP in 300 PRC with the HS Precision stock.
Now it's
Oryx machined out to fit 3.85 CIP magazine for the 300PRC
Black panels for oryx
LOP spacers for oryx
Fortmeier H210 bipod
versa pod 150-108 spigot embedded/bolted into forend
Sako S20 Monopod S588207331 (oryx had factory M-LOK slot in rear)
Tactical EVO Universal butpad adjuster.
Thumb knobs for cheek rest.
ERGO 4035 grip.
Next mods are a steel badger ordnance 20 MOA rail
spuhr mount
Leupold mark 5 HD 5-25x56
Possibly going to temporally mount my Vortex strike eagle 5-25x56 if after i get the parallax issue resolved.
(EDIT)
Added my Vortex Strike Eagle 5-25x65 MOA in a Warne Skyline 34mm medium mount. This will suffice till i upgrade the optics rail, mount, and optic. I'm not rich so it will take me some time to comfortably spend over $3,000 combined for just an optic upgrade. I will though, eventually lol
Now it's
Oryx machined out to fit 3.85 CIP magazine for the 300PRC
Black panels for oryx
LOP spacers for oryx
Fortmeier H210 bipod
versa pod 150-108 spigot embedded/bolted into forend
Sako S20 Monopod S588207331 (oryx had factory M-LOK slot in rear)
Tactical EVO Universal butpad adjuster.
Thumb knobs for cheek rest.
ERGO 4035 grip.
Next mods are a steel badger ordnance 20 MOA rail
spuhr mount
Leupold mark 5 HD 5-25x56
Possibly going to temporally mount my Vortex strike eagle 5-25x56 if after i get the parallax issue resolved.
(EDIT)
Added my Vortex Strike Eagle 5-25x65 MOA in a Warne Skyline 34mm medium mount. This will suffice till i upgrade the optics rail, mount, and optic. I'm not rich so it will take me some time to comfortably spend over $3,000 combined for just an optic upgrade. I will though, eventually lol
Last edited:
Currently it is wearing an Ace Brake and 5-25 Mark 5HD. total weight with 10rds in the magazine is 11.4lbs. when I pull the brake and screw on the Nomad Ti it is 4oz heavier. Either way it's under the 12lb limit for the light weight NRL Hunter class.
Added some rings to the new Vortex 4.5 x 22 and mounted it to my Sig Cross. First time out with it, I need mlok pic rail to mount bipod. Not overly impressed with the Cross, magazine wasn't easy locking up and when I thought it was ended up feeding one round and dropped. Very light weight, I added a brake I had just gotten. Gonna replace it with something smaller as it looks huge on it. For the money ($1350) not bad though.
Just got it today. 300 win mag
Now this was a little better. GAP Thunder Ranch in 308. Moved the New Vortex 4.5x22 to it, bore sighted. Two shots to warm it up into the berm and verify point of impact. Then 3 shots on paper @ 200 yards. I'll add a little bastard III to it I think...
GAP Thunder Ranch in 308. Moved the New Vortex 4.5x22 to it, bore sighted. Two shots to warm it up into the berm and verify point of impact. Then 3 shots on paper @ 200 yards. I'll add a little bastard III to it I think...James on the GAP. I added a little bastard to it, made it possible to stay on target to see hits now...
He turned 21 and wants a GAP for himself!
He turned 21 and wants a GAP for himself!
Great to have your son involved in long-range shooting as well! A GAP would be a fine 21st birthday present, IMO.James on the GAP. I added a little bastard to it, made it possible to stay on target to see hits now...
He turned 21 and wants a GAP for himself!
View attachment 7693576
View attachment 7693578
Between him and his sister they will eventually end up with all of them! Unless mama turns them into cash
Think I'll fix that before it's too late.
Think I'll fix that before it's too late.
Great to have your son involved in long-range as well! A GAP would be a fine 21st birthday present, IMO.
Axsr 300WM
Nightforce Atacr 7x35
Knights Pvs30
Sig 338 suppressor
And of course some blue label and padron
1964
Picked up this R700 Gen2 308 here on the Hide, promptly put it in a McRee G10 chassis. Also put a PA brake and Timney. 2 MOA with battle pack ammo. 0.5 MOA with FGMM. I now have a take off stock and bottom metal to sell over on LRH.
Took out a new MRAD today and AXSA with a 308 barrel on it. The MRAD has a 6.5 Creedmoor barrel and was using 140 Grain ELDM, 41 grains of H4350 and once fired Hornady American Gunner Brass.
Bore sighted the MRAD and first 3 on paper.
Bore sighted the MRAD and first 3 on paper.
This replicates nothing. .308 Win, Krieger 1-12”. If I had to do over again I would not use the PTG bottom and AICS mag on this rifle (I like them just fine, just not on this rifle). So, I’m building another in .30-06.
Last edited:
A light weight .308. Douglas 24” 1-12” Remington #3 contour; McMillan Remington Classic stock vertical marble 70/30 olive and black; Timney Calvin Elite at 2lbs. Leupold VX2 4-12, wide duplex and CDS knobs from the custom shop. The rifle loves the Sierra 155 BTHP (2156) and 43.0 ARComp.
Last edited:
Another beutiful rifle from Alpha Omega
It is a shorty 6.5 Creedmoor can't get over how lightweight it
is.
It is a shorty 6.5 Creedmoor can't get over how lightweight it
6.5 PRC MPA Hybrid Hunter with Bat TR SA, vortex PST Gen 2, Warne bipod, and axis precision works APW raptor muzzle brake. .5 MOA with factory match ammo, so loving this setup. Got my sons ruger precision rimfire there with it...completely stock. Just gave it a cleaning after purchase and cycles rounds just fine and hitting 2 inch targets at 100 all day.
Bighorn Origin
6mm Creeeeeedmoor
26 inch Bartlein
M24 Contour
MDT ACC Chassis w/Highland Green cerakote
Triggertech Special Single-stage
Kahles K624i
Spuhr SP-4006
Atlas Bt10
Weight --> 23.3 lbs
0.36in @ 100 yards --> 5 shot group
41.2gr H4350
2.218 CBTO
Hornady Brass
107gr SMKs
3165 fps
11 SD
6mm Creeeeeedmoor
26 inch Bartlein
M24 Contour
MDT ACC Chassis w/Highland Green cerakote
Triggertech Special Single-stage
Kahles K624i
Spuhr SP-4006
Atlas Bt10
Weight --> 23.3 lbs
0.36in @ 100 yards --> 5 shot group
41.2gr H4350
2.218 CBTO
Hornady Brass
107gr SMKs
3165 fps
11 SD
A little 200 yard shooting today with some ammo I loaded up on Saturday. GAP Templar II / Ruckus, MCS PRS TCS, S&B 3x27 High Power
First 5 on paper cold bore after cleaning. Tried out some new printed targets...
34.5 grains of H4350, new GAP/Hornady brass, 107 SMK, old cci 400 primers (from the early 1980)
Minus the dime...
Still damn good.
First 5 on paper cold bore after cleaning. Tried out some new printed targets...
34.5 grains of H4350, new GAP/Hornady brass, 107 SMK, old cci 400 primers (from the early 1980)
Minus the dime...
Still damn good.
Went out to the flat range tonight to test a new load. I had to wait for the locals to have dinner before I could finish my shot string at 400Y.
Remington 700
22" Hart Barrel
30-06 chambered for VLD bullets
AIAX chassis
Spur mount with a Leupold LRP 8.5x25
Running 2958 avg. with 52g of Varget under a Nosler 175 RDF
Remington 700
22" Hart Barrel
30-06 chambered for VLD bullets
AIAX chassis
Spur mount with a Leupold LRP 8.5x25
Running 2958 avg. with 52g of Varget under a Nosler 175 RDF
