Precision Rifles.....show em!!

[Longrangeprecision762]

Went out to the flat range tonight to test a new load. I had to wait for the locals to have dinner before I could finish my shot string at 400Y.

Remington 700
22" Hart Barrel
30-06 chambered for VLD bullets
AIAX chassis
Spur mount with a Leupold LRP 8.5x25
Running 2958 avg. with 52g of Varget under a Nosler 175 RDF

 

[stello1001]

You should have made one of the locals your dinner...

 

[hafejd30]

The Siblings:
AT/AXMC

 

[HenryTheAce]

The Siblings:
AT/AXMC
View attachment 7702957

I want that AT! Nice setups you got up there yooper!

 

[BuLLet]

Got this back in 2007 after waiting over a year for the action to come in. It was around the time Nesika was going out of business, unknown if they would continue somewhere else. It was almost like forget about it, then I get a call from George telling me the action showed up and 'do you still want to do the build'? Im like of course.

I want to get it scoped and take it out for a run.... any suggestions for scopes?


NESIKA MOD T, .223 REM
BARTLEIN 1-12 TWIST M-24 CONTOUR 23" BARREL
MANNERS T2-A GAP CAMO STOCK
BADGER STEEL FLOOR METAL
FINISH IN OD GREEN CERAKOTE

 

[polish handgunner]

Fun at the Sandpoint range today shooting a 30-40 Krag carbine ocassionally hitting a plate at 200 yards using cast bullets!

 

[tiger49931]

my baby 300 wm GA PRECISION HOSPITALLER

 

[tiger49931]

my other baby GA PRECISION TEMPLAR 6.5cm

 

[tiger49931]

my custom built Blueprinted rem 700, 300 win mag ,bartlain 5r mtu in a whiskey 3 chassis. Edited to fix my bad engrish.

 

[OldEcho]

Lots of great rifles in this thread, tons of inspiration!

Here's what started me down the path... My first semi-precision rifle & one not so precise Have only shot these out to 1100m, but hoping to learn a lot from this initial venture while getting a .300WM put together.

 

[Senor_Barney]

A little 200 yard shooting today with some ammo I loaded up on Saturday. GAP Templar II / Ruckus, MCS PRS TCS, S&B 3x27 High Power

First 5 on paper cold bore after cleaning. Tried out some new printed targets...

34.5 grains of H4350, new GAP/Hornady brass, 107 SMK, old cci 400 primers (from the early 1980)

View attachment 7702727

View attachment 7702728

Minus the dime...

View attachment 7702729

Still damn good.

View attachment 7702734

Full disclosure...this is a dumb question from someone just trying to educate himself.

I shoot the 107 SMKs in a 6cm and you shoot the 107 SMKs in 6GT. I load 41.2gr H4350 and you load 34.5gr H4350 according to your post. That's ~7 grains!!!

It's probably something simple, but what explains such a big delta is your powder charge vs. mine for the same grain bullet?

Wondering if I should be coming down a ton...

 

[BuLLet]

Simple, case size... 6 CM is much larger... 41.2 gr would probably not even fit into the case.

Full disclosure...this is a dumb question from someone just trying to educate himself.

I shoot the 107 SMKs in a 6cm and you shoot the 107 SMKs in 6GT. I load 41.2gr H4350 and you load 34.5gr H4350 according to your post. That's ~7 grains!!!

It's probably something simple, but what explains such a big delta is your powder charge vs. mine for the same grain bullet?

Wondering if I should be coming down a ton...

 

[BuLLet]

Americana day at the range today. Both 6GT (Gay Tiger)

 

[BuLLet]

Little more Americana @ 200 Yards again today. Just loving these 6GTs.

Tried out another new target, liked it but I think a circle with white in the center would suit me better with the 3x27. My old eyes are getting hard to see that dot in the orange.

3 Rounds @ 200 yards.

 

[JasonHanos]

PGW M15 ACC

Custom Barrel and action by Prairie Gun works in good ol Canada.
Chambered in .308

Vortex Razor gen ii 4.5-27x56 FFP EBR-7c
Vortex Precision rings
Trigger tech trigger
MDT ACC stock.
MDT Bipod
Heathen brake
Accu-Shot Monopod

Shooting Half MOA with Federal GM2 175gr

 

[Highland219]

Ruger American Hunter 6.5 CM
MDT XRS Chassis
MDT Forend
Wiebad cheek pad
Anarchy Outdoors bolt handle/knob
Leupold Mk5
MDT Elite Rings
Atlas CAL
Q Trash Panda

 

[THEIS]

Hi,

Our Hoplite Arms Aspis with ZCO

Sincerely,
Theis

 

[stello1001]

Hi,

Our Hoplite Arms Aspis with ZCO

View attachment 7706698

Sincerely,
Theis

Is the cheek riser high enough?

 

[JuiceboxPNW]

I don't think there is anything left to do with this. I have been tinkering with it for the past two years at this point and have done matches with it. Let's see if I can rmember everything.

6.5CM
Lefty Bighorn Arms TL3 with DLC coating
Benchmark Heavy Palma 25"
Area 419 Hellfire
Bix N Andy TacSport Pro SS set at 1lb
KRG Whiskey 3 Gen 6
-Rear Bag rider weight
-Forend T-Slot Weight
-Arca Rail
Spuhr 4602 Mount
Vortex Razor HD Gen II 4.5-27 EBR7
-Vortex Bubble Level
-Vortex Switchview

Not Seen:
Atlas CAL Bipod

 

[Blueoval56]

Newest acquisition and first AI.
AX308 with 24” Lothar Walther 308 barrel and Tac brake. Bushnell XRS2 w/H59 in an A.R.C M10 QD-L mount and an Atlas.

 

[Paladin300]

Tikka TSR-1 308 w/ optics rail
Athlon Midas BTR 2.5-15 SFP mil/mil scope

 

[Smurph_]

R700 Varmint Synthetic (c.1995) .308 win
HS Precision stock with one piece bedding block.
26” heavy varmint contour barrel 1:12”
One piece 20MOA base.
Vortex precision matched rings.
Vortex PST gen2 5-25x50 FFP in MOA
Stock bag is an aftermarket item I added to set the cheek rest at the correct height for me.
3/4MOA rifle (sometimes better) with factory ammo. Still haven’t tuned a hand load to it yet.

 

[Storyteller]

Greetings all. I'm new here and totally dig this site. This is my new Savage 110 LSS in 6.5 Creedmoor. I through on my Burris 5x25x50 optic and adjusted my length of pull to 15" (not seen in photo). They did a great job on this weapon and I'm doing real well at hitting at 760yrds. No complaints here!

 

[Gettin'By]

Waiting on glass, mount, and rings....

Is that the KRG XL arca rail?

 

[Aftermath]

Hi,

Our Hoplite Arms Aspis with ZCO

View attachment 7706698

Sincerely,
Theis

.

 

[Jkl86]

 

[Jkl86]

5 shots at 200m
First 5 was to get dialed in..

 

[Longshot231]

View attachment 7709595View attachment 7709596

Caliber?

 

[Aftermath]

5 shots at 200m
First 5 was to get dialed in..

Before or after the brewski?

 

[Jkl86]

Haha before,
Its a 6.5 creedmoor (tikka), with factory ammo
Federal gold

 

[Storyteller]

Greetings all. I'm new here and totally dig this site. This is my new Savage 110 LSS in 6.5 Creedmoor. I through on my Burris 5x25x50 optic and adjusted my length of pull to 15" (not seen in photo). They did a great job on this weapon and I'm doing real well at hitting at 760yrds. No complaints here!

Thanks for the thumbs up guys ! I ain't done modifying yet lol!

 

[Nathantc]

Thanks for the thumbs up guys ! I ain't done modifying yet lol!

if you have any issues with it, feeding, extracting, or the like, feel free to pm me. Savage has its common issues but can be pretty fined once lined out.

 

[Vamike9]

Bergara B14 6.5 CM with some extras.

 

[SonoranArmament]

.375 CheyTac
Stiller Tac408
Bartlein 29” barrel
Terminator T4 brake
McMillan A-5 Supermag
Nightforce optics
Cadex bottom metal and mag

 

[LuvDog]

Just got this back from cerakote. Need to install a BA

 

[Storyteller]

Just got this back from cerakote. Need to install a BA

View attachment 7710525View attachment 7710526

Very cool. My Korean is real rusty so hope this makes sense; 한극애서 오슷아요? I really need a tutor lol.

 

[JasonPaul]

Here’s my first custom build after shooting a TC LRR for almost two years. I got bit by the bug and slowly gathered parts.

Woox Furiosa chassis
Curtis Custom Valor Action
Trigger Tech Diamond
Hart 7 Saum 1:8 25” Barrel
Bartlein 6.5cm 1:7.5 26” Barrel
Area419 arca rail kit
Atlas PRS tall bipod
NF ATACR 7-35 mil-xt
Spuhr Mount
LRA Sent it Level
McRees angled bag rider
APW Muzzle Brake (not pictured), will add more pics when it’s back together and the new barrels are done, also have a MDT ACC chassis that I bought for comps but I don’t like it as much as this one)

 

[LucasRaymond]

MPA Matrix (from my Vudoo waiting on my Manners TCS)
Borden Super Short 6 LH
Brux barrel 6 Dasher 1-7.5” twist 28” barrel
Apa Gen II Bastard
TT Diamond Flat
Spuhr Mount
Leopold Mk5 PR2-mil
Ckye pod gen 1

 

[SAS_Sniper]

Rem MLR full customized.338LM

 

[Flolito]

408 Cheytac with SAX MSG Bullets

 

[BadAccountant]

408 Cheytac with SAX MSG Bullets

Ooof, now I need a cigarette.

 

[FuhQ]

Rem 700 5R .260 Rem.
Arken SH4 Gen2 6-24x50 VPR MIL
Dead Air Nomad-LT

 

[S12A]

G series Remington 700 with carbon fibre bolt handle , IBI 22” MTU contour carbon fibre sleeved barrel , a custom made brake by Jeff Borg, KMW Sentinel stock, Nightforce 20 MOA rail, Badger Ordnance rings, Triggertech special 2-stage trigger. The scope is a Gen 2 vortex PST which will be swapped with my 3-15 Nightforce NXS soon. Bipod is Atlas CAL Gen 2. Magazine is a Magpul 30-06

 

[Zack_va248]

 

[Mrindecisive]

View attachment 7717120View attachment 7717121View attachment 7717123View attachment 7717124View attachment 7717125

How would you compare the tl3 to the bat?

 

[Zack_va248]

How would you compare the tl3 to the bat?

Not even close. I know this is going to hurt feelings but it's just the unbiased truth. The Bat is by far the smoothest action I've found. It cycles like butter. Like its on ball bearings with almost no freeplay. With that said there's obviously a lot more to actions than feel. I've run it in several matches and countless range days and haven't had an issue. Not to say my TL3 is bad at all. But all things being equal in reliability the bat just brings a whole new feel to "custom"

 

[Shoots 700's]

Bighorn TL3 short action 7 SAUM ready to takes its maiden voyage this weekend.

 

[Tokay444]

Not even close. I know this is going to hurt feelings but it's just the unbiased truth. The Bat is by far the smoothest action I've found. It cycles like butter. Like its on ball bearings with almost no freeplay. With that said there's obviously a lot more to actions than feel. I've run it in several matches and countless range days and haven't had an issue. Not to say my TL3 is bad at all. But all things being equal in reliability the bat just brings a whole new feel to "custom"

It's because they run Mazaks, and not Haas. Kelbly's have a similar rep, and they run Mazaks as well...

 

[Simia Dei]

G series Remington 700 with carbon fibre bolt handle , IBI 22” MTU contour carbon fibre sleeved barrel , a custom made brake by Jeff Borg, KMW Sentinel stock, Nightforce 20 MOA rail, Badger Ordnance rings, Triggertech special 2-stage trigger. The scope is a Gen 2 vortex PST which will be swapped with my 3-15 Nightforce NXS soon. Bipod is Atlas CAL Gen 2. Magazine is a Magpul 30-06


View attachment 7717111

Jeff is going to be attaching a switchlug (when it finally arrives) and chambering some barrels for me as soon as I can send him everything. Top bloke

 

[FuhQ]