Precision Rifles.....show em!!

[BuLLet]

A little 308 shooting today.... TacOps X-Ray 51

Just a generic load with some powder I had on hand.
SMK 168, 41 grains Reloder 15
New Winchester Brass, WLR Primers

Sand Pit @ 200 Yards, crappy table and off a Harris Bipod!

This is the cold bore group after a cleaning.....

 

[Adamc55]

300 PRC build
Defiance Ruckus
24" Proof prefit
Triggertech diamond
Krg whiskey 3 folding chassis
Gen II razor and vortex PMR rings
Accutac fc4-g2 bipod

This rifle has had some horrible horizontal stringing since I finished it. After 75 rounds wasted I think I figured out the problem, now to get some more time behind it.

 

[shooterpunk]

300 PRC build
Defiance Ruckus
24" Proof prefit
Triggertech diamond
Krg whiskey 3 folding chassis
Gen II razor and vortex PMR rings
Accutac fc4-g2 bipod

This rifle has had some horrible horizontal stringing since I finished it. After 75 rounds wasted I think I figured out the problem, now to get some more time behind it.View attachment 7776309

What was the problem?

 

[Adamc55]

.

 

[Adamc55]

What was the problem?

I believe a small o-ring on the forward action screw allowed there to be excessive space between the action and chassis. I also think the torque was off between the 2 action screws and the recoil lug was too far forward. Hard to say it was those things exactly but I saw a big difference immediately after removing the o-ring and re-torquing the action. It was shooting 1.5" groups at 100yds before the changes, stringing from right to left (I removed myself as the culprit after shooting other magnums successfully and also having others shoot this rifle with the same result). Right after the changes it was shooting ~ .60 moa at 100yds with me still not used to the rifle.

 

[D_TROS]

Kelbly Atlas
Proof in 308 (168's @ 2800)
XLR
Burris
Bix
MDT Triple

 

[RFutch]

Man that new buttstock looks way better than the old ones.

 

[ak4seven]

Deleted

 

[Saltyag15]

I'm glad to finally be able to post a gun to this thread, as this thread is partially responsible for this build! Barreled action was done by Southern Precision Rifles.

6mm Creedmoor
Bartlein barrel. Marksman contour at 24"
Terminus Apollo
MPA Hybrid chassis
Trigger tech special
Harris bipod
Nightforce NX8 4-32x50 MOAR F1
ARC M-Brace Rings (pretty much identical to the M-10 rings from what I can tell). Low 0.94"

New fun plinking gun and varmint hammer!

 

[Razor6300804959]

Tikka T3x TAC A1 6.5 CM
Nightforce 5-25x56 ATACR F1 C574
Nightforce Extreme Duty Rings
Atlas Bipod

​ ​ ​

 

[viking78]

T3 Whiskey-3 260rem & ZCO527.

 

[viking78]

T3X 6.5PRC Whiskey-3 ZCO527.

 

[BuLLet]

That looks ice cold!

T3 Whiskey-3 260rem & ZCO527.
View attachment 7780768

 

[viking78]

That looks ice cold!

It was only -25C

 

[BuLLet]

Fu*k that, I'm too old for that shit... it would be my end!

It was only -25C

 

[ejg]

This rifle was shown before, but in this picture the colours match nicely. Wintery morning on the west coast of Ireland.

edi

 

[shooterpunk]

Just picked up a Tikka 6xc here local to me. Bravo chassis. I'm excited to take it out!

 

[stello1001]

Just picked up a Tikka 6xc here local to me. Bravo chassis. I'm excited to take it out!View attachment 7781023

This one is nice.
Is that a weaver scope?

 

[shooterpunk]

This one is nice.
Is that a weaver scope?

Nope, it's the sightron s-tac 3-16x42. It's been great so far. Wish it had more magnification, but oh well.

 

[Cardboard Assassin]

Nope, it's the sightron s-tac 3-16x42. It's been great so far. Wish it had more magnification, but oh well.

Great scope for the cash. The reticle is on the fine side but the glass is outstanding for the price.

 

[Cardboard Assassin]

T3 Whiskey-3 260rem & ZCO527.
View attachment 7780768

Great looking rifle, I love the KRG enclosed forend (so much so that I have one on order for my next build).

 

[fxdrider]

T3 Whiskey-3 260rem & ZCO527.
View attachment 7780768

Is that a brake - on the outside end of a suppressor?

 

[LeftyJason]

Is that a brake - on the outside end of a suppressor?

Built into the end. Like they do on the silencerco harvester.

 

[fxdrider]

Built into the end. Like they do on the silencerco harvester.
View attachment 7781718

Nice!
Now I must have one.....

 

[LeftyJason]

Nice!
Now I must have one.....

I wouldn't personally. It is partly made of aluminum. Aluminum gets eaten too easily by chemicals for cleaning. Also for work I machine parts for the hot side of turbine jet engines (semi similar to the inside of silencers). We don't use aluminum for parts exposed to heat.

Check out others by Thunderbeast, Rugged, or Dead Air. They are more highly recommended here on the Hide.

Ive got a Thunderbeast Ultra 7 in nfa jail right now. Sorry. No pics yet of it on my bolt gun.

 

[KOani83]

 

[viking78]

Is that a brake - on the outside end of a suppressor?

Yes, it is a A-Tec PRS-3 hybrid suppressor.
100% stainless steel.

A-TEC PRS 3 mod

 

[fxdrider]

I wouldn't personally. It is partly made of aluminum. Aluminum gets eaten too easily by chemicals for cleaning. Also for work I machine parts for the hot side of turbine jet engines (semi similar to the inside of silencers). We don't use aluminum for parts exposed to heat.

Understood. Just seemed like a cool concept - brake on a suppressor.

 

[LOS]

 

[TXcoach]

My ATeam built 6 dasher.
Foundation stock
Impact action
Bartlein Barrel
419 muzzle break
TT Diamond Trigger
ZCO 5x25

 

[BuLLet]

Lovely looking rifle. That classic wood look can't be beat....

Cousins!

My ATeam built 6 dasher.
Foundation stock
Impact action
Bartlein Barrel
419 muzzle break
TT Diamond Trigger
ZCO 5x25

 

[KOani83]

Uintah Precision 6.5 Creedmoor

 

[Jackjam]

Mpa 6.5, bergara b14 308 and b14r dressed alike.

 

[Theoverwatch]

One of my first .30

 

[Theoverwatch]

 

[Chasingpro]

Brand new and not yet complete

Uintah Precision UPR10 6mm creedmoor
Aero precision M5E1 lower
Vortex PST gen2 5-25x50 FFP
Magpul mlok bipod
Magpul PRS gen 3 stock

Still waiting on my JP scope mount and area 419 hellfire muzzle brake to come in.

 

[BigBabyMoses06]

Very cool rifle! Wish they would sell just the upper/bolt. Would jump on one right away.

 

[Jpoovey0827]

Here’s a model 86 from American precision arms previously owned by a one of a kind pitcher in the mlb; MadBum. Love this little 308

 

[Freddyfourfinger]

New rifle for 2022 season, 6XC.
KS Arms 3-lug
KS Arms 26" barrel
MDT ACC
ZCO 527 MPCT3X

Just waiting for my backorder AP ACRO C2 and then she is "done".

 

[carte89]

Impact action 6.5
Bartlein
Mpa
Gen2 rzr
Spuhr
Atlas

 

[Steel head]

Yesterday’s contenders

 

[HighPlainsMarksman]

Very cool rifle! Wish they would sell just the upper/bolt. Would jump on one right away.

I thought they did? https://uintahprecision.com/product/upr10/

 

[Adamc55]

Seekins havak bravo in 6.5 creedmoor

 

[BigBabyMoses06]

I thought they did? https://uintahprecision.com/product/upr10/

Sorry, I meant just the upper/bolt. No barrel or hand guard.

 

[Texas T]

.300 Norma mag, w Tangent Theta scope, krg chassis, timney trigger, fat bastard brake

 

[orbitrap]

KRG Bravo, enclosed forend
Curtis Vector action
Jewell HVR trigger
Bartlein 5R Marksman contour, 26" 6.5 PRC,1:7.5
Shark thresher QD mount
Atlas PSR

 

[Cardboard Assassin]

KRG Bravo, enclosed forend
Curtis Vector action
Jewell trigger
Bartlein 26" 6.5 PRC,1:7.5
Shark thresher QD mount


View attachment 7787866

Its a looker!

I`m in the process of building something along the same lines (KRG Bravo with enclosed forend / fluted barrel - probably 24" or maybe 22") and if it ends up looking like that I will be pleased.

Out of curiosity what profile is the barrel?

 

[orbitrap]

Its a looker!

I`m in the process of building something along the same lines (KRG Bravo with enclosed forend / fluted barrel - probably 24" or maybe 22") and if it ends up looking like that I will be pleased.

Out of curiosity what profile is the barrel?

thanks, you'd definitely be pleased. Very ergo-friendly stock, virtually little perceived recoil with 6.5 PRC.
I just edited it, it's a 5R (marksman) contour. Got it from Area 419, $473 after shipping, includes helical fluting.

It's shown with a Bering Optics ACE 4-14 x 44 scope, I've since swapped it for an Arken Optics EP4 6-24 x 50.

 

[orbitrap]

Here she is with the shark suppressor, and Arken Optics EP4. She's a dream to shoot with the shark, but 6.5 PRC ammo is stupid expensive these days (avg $6/rd.)

 

[SAS_Sniper]

Edit: MIRS. Need one now

Yep..mirs...sorry for late resp...i was out!
Thanks!