Because I can never just leave a finished rifle alone.
G3 on the Mausingfield, and the G2 moved down to the Nucleus.
G3 on the Mausingfield, and the G2 moved down to the Nucleus.
-
Having trouble using the site?
Contact support
Shot this GAP Surgon 6mm GT today at my 100 yard indoor range. Barrel has about 50 rounds through it now. Need to work up a load for it, as my basic load of 107 SMK and 35 grains of H4350 isn't doing it justice. Shot 4 groups of 5 and all of them are around half inch.
Took the old 2002 Remington 700 Sendero SF 7mm STW out to the range today to give her some fresh air, since it's been a while since I heated up the bore... She did not disappoint. This rifle has always been a damn tack driver. This is one I'll never let go.
Ignore the blacked-out spot, someone shot my target before I could snap of pic of the group...
Ignore the blacked-out spot, someone shot my target before I could snap of pic of the group...
Last edited:
After 6 months of waiting, I finally made the opportunity to go to my local range and put some rounds through the barrel of my new UP-10.
Distance: 100 yards
Wind velocity: Not significant
Ammunition: Federal Premium Sierra MatchKing 308 Win, 175 grain (Velocity - 2427 fps@100 yds)
After 20 rounds downrange, this is the result:
Not the greatest of pictures, because it was taken through a spotting scope back behind the firing line. But I think it shows that the rifle shoots fairly well, in spite of the many mistakes I may have made during the session.
Took my first home “build” out (first time I’ve screwed a Prefit into an action) and I’m quite pleased. Quick zero with factory ammo and then put 6 shots on steel at 411 yds with a variable wind with a vertical spread of about 2”, horizontal about 4”. Think it’ll be just fine for NRL Hunter. May even take it actual hunting some.
Terminus Apollo Lite
Proof 6.5 PRC
Omega 300
Manners PRS-TCS
ZCO 527 MPCT3
Terminus Apollo Lite
Proof 6.5 PRC
Omega 300
Manners PRS-TCS
ZCO 527 MPCT3
6.5 PRC
Ruger M77 Hawkeye LRT
Arken SH4 6-24x50
Ruger M77 Hawkeye LRT
Arken SH4 6-24x50
Did not expect that. Looks a whole lot better than the buttstock on the RPR.
New video is up with the 16" Christensen Arms MPR .308 Win. comparing my Dead Air Nomad-LT & my new ThunderBeast (TBAC) Magnus-HUB suppressor.
Mounted the new S&B 6×36 on my BAT TR today. First time out with it as well.
Bore sighted, 2 into backstop, first five on paper @ 200 yds. Just my basic 6 mm GT load.
Bore sighted, 2 into backstop, first five on paper @ 200 yds. Just my basic 6 mm GT load.
I know those rifles anywhere.........has to be Passion For Rifles! Love your content!!!!!!!!!
Rem 700 6.5CM, 20" Hardy carbon barrel, PSE Evolution stock, 23.8oz bedded. Hawkins M5 aics and 4 shot Hawkins mag.
edi
edi
Carnage at 200 yards:
Before carnage:
After carnage:
Forgot to take pics of the rifle.
Before carnage:
After carnage:
Forgot to take pics of the rifle.
Did you shake the cans up real good before shooting them?Carnage at 200 yards:
Before carnage:
View attachment 8159650
After carnage:
View attachment 8159652
View attachment 8159653
Forgot to take pics of the rifle.
Yes, some of the beer fountains were quite impressive. 5.56 impacts created spray while 6.5 CM impacts were basically more of an explosion!
Tried this out again today, liking the scope... too bad S&B has gone through the roof.
Basic 6GT load.
Groups are all around .5 moa, need to talor a load to this rifle as well.
Basic 6GT load.
Groups are all around .5 moa, need to talor a load to this rifle as well.
Recently switched from the .223 Wylde barrel in the photo to a longer .169 freebore .223 barrel for 77 grain Sierra SMK and Berger OTM bullets. Took it out for the first time to zero and shoot some 5 shot groups at 100 yards off a bench. Shot OK with Berger 77 OTMs but not the SMKs.
Last edited:
Any Dylan cans?Carnage at 200 yards:
Before carnage:
View attachment 8159650
After carnage:
Forgot to take pics of the rifle.
They're all Dylan cans now.Any Dylan cans?
Finished up my 300 PRC
Built on a Terminus Zeus with a 1:9t 24 inch Proof.
Built on a Terminus Zeus with a 1:9t 24 inch Proof.
My Sig Sauer PRS .308
24” stainless barrel 1-10 twist
Maven RS4 / 5-30x56 Scope
Area 419 Hell Fire Muzzle Brake
Accutac Bipod
Aftermarket extended Bolt knob
Folding stock is rock solid
Built in full length Arca Rail
2 stage trigger set to 1.9 lbs
Love it, this pig is really heavy, recoil is minimal, just have to work on the biceps to run with it in matches. I shoot in an unsupervised conservation range out in the boonies so I wear the Colt 45 Commander in a Tanker style chest Holster as a deterrent to ward off any sticky fingers when I am over a 100 yards away from my rifle changing a target.
Take care and stay Safe
24” stainless barrel 1-10 twist
Maven RS4 / 5-30x56 Scope
Area 419 Hell Fire Muzzle Brake
Accutac Bipod
Aftermarket extended Bolt knob
Folding stock is rock solid
Built in full length Arca Rail
2 stage trigger set to 1.9 lbs
Love it, this pig is really heavy, recoil is minimal, just have to work on the biceps to run with it in matches. I shoot in an unsupervised conservation range out in the boonies so I wear the Colt 45 Commander in a Tanker style chest Holster as a deterrent to ward off any sticky fingers when I am over a 100 yards away from my rifle changing a target.
Take care and stay Safe
Attachments
Live out at the sand pit, that Canadian smoke has returned to ny. The S&B is doing well with the conditions.
With 56 rounds through this new build it's tighten up some.
With 56 rounds through this new build it's tighten up some.
Bergara Premier LRP in 6.5 CM
24" stock barrel
Triggertech Diamond
Atlas Bipod
Kahles 6-24
Cortina Muzzle Brake/Tuner
Best group of the day:
Working on my 6.5 PRC build now, waiting on Chassis and trigger.
24" stock barrel
Triggertech Diamond
Atlas Bipod
Kahles 6-24
Cortina Muzzle Brake/Tuner
Best group of the day:
Working on my 6.5 PRC build now, waiting on Chassis and trigger.
Here you go:
UM DBM - Unknown Munitions
Our DBM’s only use our magazines found HERE MEDIUMS WILL DELIVER MAY 2023 SHORTS WILL START PRODUCTION 3RD QTR 2023 Specifications: Long DBM weighs 3.7 ounces, Long Mag weighs 2.8 ounces. Standard M5 footprint, will NOT fit Remington BDL inlet, see below for inlet picture. But we can open up...
www.unknownmunitions.com
My 6BR
Built by Rachel Precision
Sad to see her go but getting out of centerfire
Built by Rachel Precision
Sad to see her go but getting out of centerfire
Attachments
Last edited:
That Titanium Spuhr hardware sure looks good
She is a 2003 Landrover Defender 130 TD5 engine (5 cyl 2.5 l direct injection.) 5 speed manual & low box. No EGR, no DPF, no ABS, not much electronics. You get spares for every single part of the vehicle. I sprayed the roof Duracoat Tac Black.
Yesterday in the Kerry hills letting some visitors take a few shots with my 308 out to 600m.
I fired two rounds at a rock at 1200m with the new stock on my light weight 6.5 CM 20" barrel, both rounds hit. Wind dialled for 7mph. Furthest I ever shot that rifle.
edi
Sig SSG3000 (mine) barrelled in 260 improved in a Vision ChassisAnybody know what action this is?
A couple of FN SPRs that both now sport new 26" barrels in 6.5x47. The A2 wears a Krieger and XTR III, the A1 has a Brux and Bushy DMR II.
Matt Stewart of Stewart Rifles did the chambering.
Both shoot as well as I could ever hope for, and my skills allow.
Matt Stewart of Stewart Rifles did the chambering.
Both shoot as well as I could ever hope for, and my skills allow.
Nice.
Crying shame FN stopped producing the SPR - they're still a extremely capable, helluva rifle to this day..
Some fathers day shooting with my son @ 100 yard indoor range.
GAP Built BAT TR, Bartlien 6mm GT, Foundation, ARCA Rail, Triggertech Diamond, S&B 6x36. About 85 rounds down the pipe.
His target
My target, one flyer of course.
Just my basic 6mm GT load for the herd.
GAP Built BAT TR, Bartlien 6mm GT, Foundation, ARCA Rail, Triggertech Diamond, S&B 6x36. About 85 rounds down the pipe.
His target
My target, one flyer of course.
Just my basic 6mm GT load for the herd.
