Precision Rifles.....show em!!

[USMCSGT0331]

If it's a mk13 mod 5 build, it could be for the mk11 style suppressor

Yep, those 2 are Mk13 Mod 5 clones, the barrel taper is for the Mk11 silencer. The end of the barrel is polished because that's the part that the silencer fits over, it's easier to clean crap off a polished barrel. All of these rifles are military sniper clones built to exact specs. Except the XM3, that's an actual USMC XM3 my platoon had in Iraq (got it from the CMP). There's some interesting history behind some of them (such as the Mk15 Mod 1 being 1 of 3 that was built using original M88 overrun receivers, the CSR is from the original run made by XTSP for Remington, the PSR is a prototype, etc.), but it would take too long to post here. I added a list of the rifles to my original post, in case anyone is wondering what each one is.

 

[Precisionhunter417]

My R700 223 wylde trainer. Trigger Tech Special set to a crisp 1lb. Hellfire Match brake. Special thanks to @Urbanrifleman for the Wilson prefit that shoots one hole groups with Hornady Black 75 gr BTHP.

 

[Pstau13]

Bergara B14 HMR .308 in an MDT LSS XL Gen 2 chassis with a MDT SRS, MDT grip, and Atlas V8 bipod.
Scope is a Vortex Razor Gen II 4.5-27X56 w/MDT Elite rings, NightForce 20 MOA base.
TriggerTech Special procurve trigger.
Preferred Barrels 26” Heavy Palma 308 WIN 1:10 5R

 

[Elite_KG]

6CM
Curtis Valor
Bartlein 22” M24/M40 Carbon Fiber 1:7.5
Manner LRH “Back in Black” with graphite black/tungsten/titanium blend Cerakote graphics. 10% cosmic matte clear over graphics. Matte clear over entire stock.
Burris XTR II 3-15; SCR reticle
(prolly gonna swap out for my Steiner 3-15 TX5i; SCR reticle)

 

[Hennig]

Jae700
Ultimatum Deadline
Bartlein 8TW Straight Profile 7wsm
Trentech Engineering chambering job - 180gr Hornady ELD-Ms at 3.2”
Vortex PST2 5-25 in PMRs
Rifle Basix trigger

 

[Baron23]

View attachment 7861604
View attachment 7861616View attachment 7861617View attachment 7861619

8.75 lbs with optic
View attachment 7865666

How do you like that HNT chassis? Have you hunted with it yet? Any particular likes, dislikes?

 

[Elite_KG]

How do you like that HNT chassis? Have you hunted with it yet? Any particular likes, dislikes?

It was a friend’s gun. We shot it a good bit. He loves it so far. No hunts. Super light and balanced. No complaints from me. Only chassis Ive seen I would own due to weight.

 

[Elite_KG]

Jae700
Ultimatum Deadline
Bartlein 8TW Straight Profile 7wsm
Trentech Engineering chambering job - 180gr Hornady ELD-Ms at 3.2”
Vortex PST2 5-25 in PMRs
Rifle Basix trigger

View attachment 7878626

What stencil pattern is that minus the lines? Looks like tow different kits (the lines then the granite looking pattern). I like the pattern and colors.

 

[Baron23]

JAE w MKM improved grip Cerakoted to a close match (it ain't easy) by Elite Armaments
Defiance Deviant
Bartlein .264 MTU 8.25-7.5 LGT chambered in 6.5CM
TT Diamond Pro Curve at about 1.5 lbs
ZCO 5-27 MPCT 3X in ARC rings
Still waiting for the Ultra 7 to get out of jail which may be imminently (from my lips to god's ear)

I had the barrel and sent it to Altus to be spun. They had the action and trigger. Ern did a fabulous job as far as I can tell.

I'm pretty sure that this is the first target pic I have ever posted. This is a five shot group made during barrel break in. For break in, I shot two singles, then a group of three and cleaning after the three yielded very little copper so I just went and shot this five shot group (and got almost no copper out after which speaks highly about the throat that Ern at Altus cut). First three shots are in that one hole and then it was getting late and I kind of rushed the last two with them pulled slightly left....and I'm not at all an expert marksman. For me, this is excellent shooting and, in my limited opinion, this is an excellent gun. This gun will be a shooter for sure, I believe.

 

[RayRay_G19]

Krg w3
Terminus Zeus LA QC
28" Varmit 300 PRC
TT Diamond Flat
Kahles 625i

MPA Matrix
Terminus Zeus SA QC
26' Varmint 6.5 Creedmoor
TT
Cronus BRT

 

[BuLLet]

Some rainy day shooting today. With a MagnetoSpeed to get some Velocity numbers.

TacOps X-Ray 51, 308 Win.
SMK 168, 41 grains Reloder 15
New Winchester Brass, WLR Primers

Series, 9, Shots:, 5
Min,2504, Max,2518
Avg,2510 ,S-D, 6.0
ES , 14

Series,Shot,Speed
9, 1, 2516, ft/s
9, 2, 2504, ft/s
9, 3, 2508, ft/s
9, 4, 2508, ft/s
9, 5, 2518, ft/s
----,----,----,----

GAP Templar II, MCS TCS Americana, 6MM GT
107 SMK, 34.5 grains of H4350
New GAP/Hornady brass, old cci 400
Series 10 and 11, 05/28/22

Series,10, Shots:, 5
Min,2703, Max,2728
Avg,2715 ,S-D,11.4
ES , 25

Series,Shot,Speed
10, 1, 2705, ft/s
10, 2, 2703, ft/s
10, 3, 2718, ft/s
10, 4, 2728, ft/s
10, 5, 2725, ft/s
----,----,----,----
Series,11, Shots:, 5
Min,2702, Max,2719
Avg,2712 ,S-D, 6.6
ES , 17

Series,Shot,Speed
11, 1, 2714, ft/s
11, 2, 2711, ft/s
11, 3, 2719, ft/s
11, 4, 2702, ft/s
11, 5, 2717, ft/s
----,----,----,----

GAP Tempest, 6MM GT, Manners TCS
107 SMK, 34.5 grains of H4350
New GAP/Hornady brass, old cci 400
Series 12 and 13, 05/28/22

Series,12, Shots:, 5
Min,2663, Max,2707
Avg,2688 ,S-D,16.4
ES , 44

Series,Shot,Speed
12, 1, 2691, ft/s
12, 2, 2683, ft/s
12, 3, 2663, ft/s
12, 4, 2707, ft/s
12, 5, 2696, ft/s
----,----,----,----
Series,13, Shots:, 5
Min,2680, Max,2703
Avg,2697 ,S-D, 9.6
ES , 23

Series,Shot,Speed
13, 1, 2702, ft/s
13, 2, 2680, ft/s
13, 3, 2699, ft/s
13, 4, 2702, ft/s
13, 5, 2703, ft/s
----,----,----,----

TacOps X-Ray 51, 308 Win.

GAP Templar II, 6MM GT

GAP Gladus, 223 Rem.

My Tempest, 6mm GT

Templar II

James, 223 Rem.

 

[Simia Dei]

Tempest now sits in a CPS takedown chassis for the moment and has a WTO switchlug installed. 6.5CM and 2x 7mmSAW barrels.

 

[zzzSubwayzzz]

Just picked up my new preece precision 6.5 prc tika. His guns are on podium more than any preacher or politician I've ever seen. If you haven't heard of morgun king or preece precision look them up. They are dominating.

 

[VargmatII]

FX Impact mk2. Because .22lr sucks.

 

[Longshot231]

FX Impact mk2. Because .22lr sucks.

I keep dreaming of this air rifle. Couple that with a thermal scope and it will be a rat killing machine.

Congratulations on a fine air rifle sir!

 

[VargmatII]

I keep dreaming of this air rifle. Couple that with a thermal scope and it will be a rat killing machine.

Congratulations on a fine air rifle sir!

Thanks.
Ive had it for a few years and its great. Ive changed things around a bit and this setup will last for a while. I am just wating for a suppressor for it now.

 

[Longshot231]

Thanks.
Ive had it for a few years and its great. Ive changed things around a bit and this setup will last for a while. I am just wating for a suppressor for it now.

DonnyFL?

 

[VargmatII]

DonnyFL?

I have no idea who or what that is?
Im in Sweden, I have a Norwegian made suppresor on order for it. I am just wating for legislation changes that will occur next month.

 

[zzzSubwayzzz]

I've been waiting on my for a bit now. I'm shooting a sig asp20 .22

 

[Longshot231]

I have no idea who or what that is?
Im in Sweden, I have a Norwegian made suppresor on order for it. I am just wating for legislation changes that will occur next month.

I have several of his airgun silencers and worth the money.

DonnyFL: Choosing the Best Air Rifle for Best Performance

Explore the definitive guide to the best air rifles. Elevate your shooting experience by discovering our recommended accessories to optimize performance.

donnyfl.com

 

[Big Bo]

Vargmatll, what caliber is your Impact? I have a .25 Impact.

 

[VargmatII]

Vargmatll, what caliber is your Impact? I have a .25 Impact.

Its also a .25 cal.

 

[BuLLet]

Some more velocity testing today.

@reubenski made it to the pit, Sandy, Sunny and Scorching!

GAP PPR 6GT

107 SMK, 34.5 grains of H4350
New GAP/Hornady brass, old cci 400

Series,16, Shots:,10
Min,2689, Max,2718
Avg,2702 ,S-D, 9.4
ES , 29

Series,Shot,Speed
16, 1, 2713, ft/s
16, 2, 2697, ft/s
16, 3, 2705, ft/s
16, 4, 2706, ft/s
16, 5, 2718, ft/s
16, 6, 2691, ft/s
16, 7, 2689, ft/s
16, 8, 2696, ft/s
16, 9, 2701, ft/s
16,10, 2710, ft/s
----,----,----,----

 

[kindred_spirits]

First range day with the new custom build! Ringing steel out to 1100 yards with ease.

Lone Peak Fuzion Short Action
Brux 6.5CM MTU chambered and turned by 360 Precision
PVA Jet Blast Rugged Brake Mount
MDT ACC Chassis
Vortex Razor Gen II 4.5-27x56
ARC M-Brace Rings
Trigger Tech Diamond 2 Stage
Atlas CAL on Area 419 Arca Clamp

 

[Machiavelli]

Custom built 6.5-284 my Thar rifle

 

[VargmatII]

Custom built 6.5-284 my Thar rifle

Geez, Leave some barrel material for the rest of us!

 

[Baron23]

Custom built 6.5-284 my Thar rifle View attachment 7887239

Wow! Looks like an anti-aircraft gun. How long is that barrel?

 

[Longshot231]

Custom built 6.5-284 my Thar rifle View attachment 7887239

Compensating?

 

[2011Nomad]

Top to bottom:
Mk15 Mod 1
Remington PSR
Mk13 Mod 7 (USMC)
Mk13 Mod 7 (SOCOM)
Mk13 Mod 5 (Stiller)
Mk13 Mod 5 (Remington)
Mk13 Mod 2
M40A5
M40A3
M40A3 (MARSOC)
M40A6
Remington CSR
IBA XM3

These are just the modern bolt action rifles I have, I'm still working on more Mk13's and M40xx's to add to the pile

Sir! You are my hero

 

[Texas Knight]

I feel like I'm joining the big boys for once with my first custom!
Alamo Precision Adjustable Ranger- 6.5 Creedmoore
24" Bartlein M24/M40
Defiance Tenacity
AG Composites Stock Canyon Rogue
Trigger Tech Special
Spuhr 35 mm
Leupold MK 5 5-25 PR2 Mil
Thunderbeast CB mount
Atlas PSR Bipod

 

[Skeptic1]

Mod 70
Some things done.
Heavy 223
26" Schneider
Standard .223 case 80gr amax 2850 fps
It's like shooting a laser beam

 

[Machiavelli]

Wow! Looks like an anti-aircraft gun. How long is that barrel?

Barrel is 32"long I use it to hunt Tahr on the tops of the west coast south island NZ, single shot just under 16lb it's a dream to shoot.

 

[BuLLet]

First day out with this 6MM GT. Bore sighted, and I used a leftover splatter target for my first 5 on paper.

Impact 737R, Bartlien #7 1-7.5, Foundation Genesis, Badger EFR, TT Diamond Flat, ARCA Rail.

 

[DirtyDoc]

Terminus Zeus in a McMillan A6
Leupold Mk5 5-25x56 Mil Reticle
Proof Research 6.5 CM
Area 419 hellfire brake
Harris bipod
Hawkins M5 bottom metal
not pictured MDT metal mags
.77 moa at 100 with factory Hornady Match 140 gr.

 

[Dj907]

New LRH build

 

[vprojekte]

Tikka T3X 6.5 Creedmoor
barrel Heym
break Sako TRG
stock Vision & Design Norway
ZCO 527
Aimpoint T1
Spuhr
Atlas PRS

my second PRS-Rifle

 

[vprojekte]

my ELR rifle
Deutsche Bundeswehr Scharfschützengewehr G29
Haenel RS9 .338 LM
break B&T + silencer
scope Steiner M5Xi Tremor 3
Eratac mount
Atlas PRS

 

[MrSwede]

TRG-22

 

[BuLLet]

New to me KMW Sentinel, gotten from GAP. Maybe 100 or so rounds through it.

Mounted S&B, bore sighted... a few into the backstop, then my fist 5 on paper @ 200 yds.

6.5 Creedmoor.

 

[Trigger Monkey]

Springfield Armory Waypoint 2020 in 6CM
NF 2.5-10X42
NF UL .885 rings

 

[BuLLet]

Another from today. My second BAT, this one is a TR. Started as a SAC built 25 Creedmoor. I had GAP pull that barrel and add a Bartlien #7, 1-7.5 twist, 6mm GT.

Manners PRS1, Badger Night Bridge, Triggertech Diamond, Mac Bros B7.

Mounted S&B, a few into backstop and first 5 on paper @ 200 yards.

 

[BuLLet]

And shot the Impact 737r again.

And some heard shots from the day!

 

[vprojekte]

original
Bundeswehr Deutschland G29 Scharfschützengewehr
and
Special Forces KSK Kommando Spezialkräfte Deutschland Scharfschützengewehr
Haenel RS9 .338LM with Steiner M5Xi Tremor 3 and Aimpoint T1

3. place 2021 1100 m / 1200 yard (biggest sniper event in europe - 600 starts - longshot.pl)

 

[vprojekte]

my first PRS rifle
Custom 6.5 Creedmoor
defiance Deviant Elite
Proof 28"
break APA little bastard
stock MDT ACC
Spuhr
scope ZCO 527
Aimpoint T1
Monopod
MDT CKY-POD

Norway:

10 Shots 110 yard:

 

[Elite_KG]

224 Valkyrie. 1:7 Bartlein. Custom reamer. Stiller 6.8 Bolt action & Bergara take-off stock bedded for action. My daughter’s rifle for years, but never Cerakoted it. Built it as cheap as I could at the time. I wasn’t willing to pay for Cerakote. Now I do it all myself. Shoots well. Re-bedded to relieve a little front action screw stress. Now its right. Decided to give it a full make-over. Shoots factory 88 ELD and 90 SMK very well. No issues. Must be the reamer.

 

[MechanicGino]

Top to bottom:
Mk15 Mod 1
Remington PSR
Mk13 Mod 7 (USMC)
Mk13 Mod 7 (SOCOM)
Mk13 Mod 5 (Stiller)
Mk13 Mod 5 (Remington)
Mk13 Mod 2
M40A5
M40A3
M40A3 (MARSOC)
M40A6
Remington CSR
IBA XM3

These are just the modern bolt action rifles I have, I'm still working on more Mk13's and M40xx's to add to the pile

After saw this post, I can’t show my collection. You bid me and other “83” page of shooters.

 

[RFutch]

After saw this post, I can’t show my collection. You bid me and other “83” page of shooters.

That's awesome and all, but who has the time to shoot that many rifles. I can barely shoot the 4 that I have now with any regularity. I keep having to tell myself that a 5th would just make things worse.

 

[MechanicGino]

I have from 22lr to 50bmg rifles. Last time Chance to visit my range, almost year! You’re right, no time. Only chance, wide(actually giant) back yard and shoot!

 

[MechanicGino]

But, this weekend I’ll post some of cool my rifles.

 

[ThomasBeckett]

Zermatt Origin
Proof 6.5 Creedmoor, 26" comp
Area 419 Hellfire brake
TT Diamond flat
MDT ACC
Athlon Cronus Gen2

I just got done building my first custom rifle, got it put together in 40 minutes. Zeroed in 3 rounds, then put the next 5 through the same hole. Shot some steel out to 500 yd today, everything is dead on with 147 ELDMs. She's ready for the 1000 yd steel match, and should be a nice upgrade from my Rem700 308.