Precision Rifles.....show em!!

[mr70ss]

Defiance Deviant Tactical
Manners TCS in GAP (non-metallic)
Brux 6mm 1:7.5 Heavy Varmint 31" (cut to 26")
TriggerTech Diamond flat
Sightron SIII 10-50x60 (SFP, FCH - for LR varmints)
MDT Ckye pod Gen2 (standard length)
Erik Cortina tuner brake
Innorel RTC-90 CF tripod
Innorel N52 ball head

 

[BuLLet]

Something different from the back of the safe. Twin Remington LTR's. One in 308 Win and one in 223 Rem. Must be near 20 years old now.... I can't remember exactly.

223 first

308 win

James on the 308, it kicks compared to my heavy weights he's use to shooting. Didn't expect that, you can see it on his face.

Group shot!

 

[BuLLet]

Shot @Terry Cross Sentinel today too. Removed the 3 prong flash/suppresor adapter and installed a Area 419 Hellfire. Even better for me to shoot with some recoil réduction

James on it.

His 200 yard target.

And mine, I should have stopped at 3!

 

[BuLLet]

And a new to me GAP. Defiance Deviant Tactical, started out as a 6mm XC, now a 6mm Creedmoor. Manners PRS1 Saltwater, TT Diamond Flat, Night Bridge and Arca Rail.

James on it.

 

[kgall005]

I've posted the rifle previously, but,, the ATF gave me an early Fathers Day gift on Friday when the approved my Stamp... So hanging off the end is the Elite Iron Alpha 50 BMG Suppressor...

 

[BuLLet]

I've posted the rifle previously, but,, the ATF gave me an early Fathers Day gift on Friday when the approved my Stamp... So hanging off the end is the Elite Iron Alpha 50 BMG Suppressor...

View attachment 7894764View attachment 7894765View attachment 7894766

Wow, looks like a grenade launcher!

 

[kgall005]

Wow, looks like a grenade launcher!

It weighs about as much as a GL.. lol

 

[kgall005]

Wow, looks like a grenade launcher!

Here's a pic for some perspective.. 223 round in front of Chimera 300, 50 cal round in front of EI Alpha 50 suppressor..

 

[BuLLet]

Shot this new GAP Tempest in a Manners TCS Americana today. Red, White and Blue... Getting ready for the 4th of July!

6mm Creedmoor

 

[HenryTheAce]

@BuLLet I think I speak for all of the hide when I say….. WE want to see your gun room and all these rifles in one pic for boner material… I swear it’s a new gun every day… I’m convinced and I love it!

 

[BuLLet]

@BuLLet I think I speak for all of the hide when I say….. WE want to see your gun room and all these rifles in one pic for boner material… I swear it’s a new gun every day… I’m convinced and I love it!

I don't think I have enough space for a heard shot like that.

 

[Zane777]

New long range hunting rig.
Blaser R8 Ultimatum
300 Norma match barrel
Insite brake
Minox ZP5 MR4
Tier one evolution bipod

 

[rybe390]

Last shot of the origin with the setup as is. I added heavy spacers and a grip weight and the rifle balances well now.The suppressor is about to lose the Keymo system and go with a hellfire mount. I'll save about 5 ounces and around an inch

Bighorn origin short
26" criterion MTU 6.5 creedmoor
Leupold mk5 5-25 pr2 mil
Krg bravo with enclosed foreend
Sdn6 converted by ecco machine
Tt primary flat
Flatline halo
Longtucky Supply 1" sling

 

[drglock]

6 GT
Impact 737
Bartlein HV 1-7.5 @ 26” with Ace brake
Foundation Centurion
Triggertech Diamond
Hawkins DBM

Just picked it up today from the smith. Hopefully get to the range with it Monday.

 

[BuLLet]

Shot these two again today. 200 yard sandpit, sunny 88 degrees and super windy.

The Spuhr clamp cracked installing the scope on the rifle today. I had another mount unused in the box and just swapped it.

 

[buffalowinter]

Armalite AR-50 bedded into surplus military McMillan TAC-50 stock. .50 bmg

 

[LOS]

 

[Awag1000]

H-S Precision makes a really great stock for Savage rifles.
Makes engaging those evil steel targets at 1 mile easier.

Build:
Action: Savage 110 Long Action
Optic: Meopta Optika 6 5-30x56 MRAD
Rings: American Rifle Company M-Brace
Rail: EGW 30MOA
Barrel: X-Caliber 416r 1:9 24" 5R Cryo Stress Relieved 300 Winchester Magnum
Muzzle: Griffin Armament Taper Mount 2 Port Brake
Trigger: Rifle Basix Savage trigger. (trigger shoe was designed and 3D printed by me)
Stock: H-S Precision PST-137 (spray painted)

 

[ArmedGinger]

Here's a mock up of what I'm building next. Needs some bedding and a little stock work. Pulled the stock put of a parts bin at work.

 

[Shoulder-Bump85]

Defiance Tenacity Action
Proof Stainless Barrel
Chambered in 6mm Creedmore by Area419
Nightforce NXS 8-32. Nightforce Rings
Mpa Matrix Chassis
Timney “The Hit” trigger

 

[BuLLet]

Got an RRS Tripod and tried it out today. I'll need to practice holding horizontal. Also, need to try sitting with the tripod. Windy as all hell too... and Tripod in sand, maybe my horizontal wobble was softball size at 200 yds. Ended up just picking off rocks.

Both 6mm Creedmoor, Tempest in TCS and Deviant in Saltwater.

Different and certainly fun shooting with the Tripod.

 

[Dooby]

Got an RRS Tripod and tried it out today. I'll need to practice holding horizontal. Also, need to try sitting with the tripod. Windy as all hell too... and Tripod in sand, maybe my horizontal wobble was softball size at 200 yds. Ended up just picking off rocks.

Both 6mm Creedmoor, Tempest in TCS and Deviant in Aqua Marine.

Different and certainly fun shooting with the Tripod.

View attachment 7903208

View attachment 7903209

View attachment 7903210

View attachment 7903211

Is that the newer Anvil-30-ARC head?

 

[BuLLet]

Is that the newer Anvil-30-ARC head?

Yes it is!

 

[BuLLet]

Some @Terry Cross twins were delivered on Friday. Both Sentinels, one being a hunter version. The hunter was a 1 of 6 he builds for stock purposes. The other was a custom.

Great guy to deal with, superb build quality. Look forward to picking out some scopes and getting behind them.

 

[Laskey0104]

SAC built long range hunter
6.5 PRC weighing 6.8lbs before scope
Defiance ANTI X
Proof 22in
Manners LRH
Custom cerakote

 

[Shoulder-Bump85]

300 Norma Magnum
Built By US Precision Rifles
Trued REM 700 LA
29” Bartlien 1:9
McMillan Stock Gap Camo
Nightforce NXS 8-32x56
Powered By H-1000 Powder

 

[Shoulder-Bump85]

.260 Remington
Built By US Precision Rifles
Trued Remington 700 SA
26” Bartlien MTU 1:8 twist
Nightforce NXS 8-32x56
McMillan Stock
Badger M5 Bottom Metal

 

[HenryTheAce]

Some @Terry Cross twins were delivered on Friday. Both Sentinels, one being a hunter version. The hunter was a 1 of 6 he builds for stock purposes. The other was a custom.

Great guy to deal with, superb build quality. Look forward to picking out some scopes and getting behind them.

View attachment 7904210

View attachment 7904211

View attachment 7904212

View attachment 7904213

Heavy…… breathing…… fully…… aroused

 

[DangerRanger]

Bergara in a mcmillan

 

[LeftyJason]

Update day!

Tikka JRTXB482 lefty stainless t3x lite 6.5 creed

Vortex razor 2 4.5-27x56 7c mil in vortex precision rings (used off the hide)

Murphy tactical 20moa titanium rail (just cause I could)

RRS sc-lr, RRS atlas adapter spacer, Atlas CAL gen 2 no dye with Atlas spike FEET (thanks @Kasey)

KRG whiskey 3 with arca rail. Krg branded accurate mags.

Note: bolt handle isn't all the way down. Will have to make a slot for the bolt handle on the correct side.

Weight with everything listed above with empty mag 14.8lbs.

View attachment 7601756View attachment 7601757

Update again!

Tikka JRTXB482 lefty stainless t3x lite 6.5 creed

Vortex razor 2 4.5-27x56 7c mil in vortex precision rings (used off the hide)

Murphy tactical 20moa titanium rail (just cause I could)

RRS sc-lr, RRS atlas adapter spacer, Atlas CAL gen 2 no dye with Atlas spike FEET (thanks @Kasey )

KRG whiskey 3 with arca rail. Krg branded accurate mags.

Sterk titanium bolt shroud gen 2 and Sterk left handed swept ball (thanks @cannoncrossfire)

Precision Underground bag and suppressor cover (thanks @Precision Underground)

Thunderbeast Ultra 7 30 cal CB on a TBAC CB face mount brake installed by TBAC. Stamp came in today. 385 days from cashed to approved.

 

[RS14]

Some photos I snapped tonight with my phone

 

[S12A]

Rem 700 L/A, IBI MTU contour Carbon Fibre 1:10 , .30-06 , KMW Sentinel Stock, NF rail. Triggertech special 2-stage , custom made brake

 

[smadam78]

View attachment 7848634Remington 700 vls barreled action, McMillan a3-5 in Forrest green, jewel trigger, leupold mark 5 hd

What height rings are those ?

 

[03machstock]

What height rings are those ?

24 mm (.94”). It’s their low ring

 

[Hennig]

Coated this for a buddy today.

JAE700/Deadline/TT/IBI 6.5x47

 

[BuLLet]

Something odd and old out of the back of the safe. Blaser LRS 2, 308. Probably 18 years since last time this was at the range.

Used some 150 grain plinking ammo.

 

[TheBoctor]

AntiX XM/ LRH Black Forest/ 24” Proof 7SAUM/ NX8/ Ultra 7 Built by Fritz at Black Canyon Customs in CO.

 

[siesie]

7.62 NATO

300 WinMag

 

[PabloPlutarco]

7.62 NATO
View attachment 7909999300 WinMagView attachment 7910000

Am much liking the 7.62!!
Could you give a brief description of the setup?

 

[siesie]

Am much liking the 7.62!!
Could you give a brief description of the setup?

Mirage ULR stock (prototype), Remington 700 SA, Douglas 22” barrel (7.5 twist 4 groove), NightForce 3.5-15x50mm MOAR scope on 20 MOA base, Tactical bolt knob, Timney trigger, Harris bipod (prototype feet), Badger Rings, Badger Angle Cosine Indicator, US Optics Anti-Cant Device

 

[nalye]

My introductory posting, so a nice "hello" to you from Germany.

Here's my 20.5 lb rifle that I built through the year:
Tikka T3x Tac A1 action and barrel in .308
MDT ACC chassis with the vertical grip and 5 interior weights
MDT SRS-XF buttstock with added weight
B&T Accu-Shot BT12-QK Monopod

Bix'n Andy ball trigger​

Vortex Strike Eagle 5-25x56 MOA
ERA-TAC block mount
Fortmeier bipod
Area419 Hellfire Match brake
Feisol CT-3442 tripod with the CB-40D ballhead
Unicorn pillow for maximum efficiency

 

[Baron23]

6.5 CM
Defiance Deviant action
Bartlein MTU in 8.25-7.5, left gain twist, in 400MODBB steel, finished at 26"
TT Diamond Pro Curve (have a flat shoe TT on another gun....I think I might like flat better)
BA with Trigger spun and assembled by Ern at Altus
J Allen chassis
MKM JAE alternate grip Cerakoted to match the JAE furniture
ZCO 5-27 MPCT 3X in ARC M-10 rings
Not shown but now on the gun, TBAC Ultra-7 mounted using Area 419 Hellfire system
Atlas CALS

 

[Lunchbag]

.223 with TL3 28" and MDT XRS Mark5 HD 7-35 with CHH

 

[brian1]

Perhaps not what most of you are thinking of when you say "precision rifle", but precise nonetheless.
Smokeless muzzle-loader putting out a 300gr bullet at nearly 3000 fps

200 yards, 2" dot. 2 shots to right, adjusting scope, 4 shots in 1 hole.

 

[Forgetful Coyote]

Perhaps not what most of you are thinking of when you say "precision rifle", but precise nonetheless.
Smokeless muzzle-loader putting out a 300gr bullet at nearly 3000 fps
View attachment 7911181
View attachment 7911182
View attachment 7911186
200 yards, 2" dot. 2 shots to right, adjusting scope, 4 shots in 1 hole.

Gotta pic of the projo youre using? Just curious what it looks like.. and what caliber? Sounds like a beast what powder and how much?

 

[brian1]

I just finished building this rifle. I ordered the parts in the summer of 2021, did the metal work last December, worked on the stock from January to June. Stolle Atlas RBLP receiver, full floating Brux 29" 1:20" twist barrel with Heavy Palma profile, Arrowhead brake & ignition, Timney 533 trigger, bedded & triple pillared Richard's stock. This rifle uses 80 grains of H322 under a 45 cal 300 grain Arrowhead NSR (No Sizing Required) bullet that is shooting Bullet To Bore (no sabot).

I have a similar rifle, based on the same ignition system, that's a T/C Encore Pro Hunter barrel, and it uses 60 grains of 4198 under 45 cal 275 grain Arrowhead NSR bullets, also B-B. Both are wonderfully accurate. This bolt gun is the heavy hitter, though.

I have another one that's a custom build on a Savage ML-II receiver, with a 26” 1:22 twist 45 cal PAC-Nor stainless barrel. I believe it was built by the late Rick Bibby of Arkansas. That one could probably shoot Bullet To Bore, but I've only used saboted 40 cal 180 grain Hornady XTP and 200 grain SST bullets so far with it. With sabots, I used 45 grains of 4198. Now that I've learned more B-B techniques, I'll bet I could go back to it and maybe get it shooting as well as the two based on the Arrowhead ignition system.

I also have a stock Savage ML-II 50 cal and I use 45 grains of 5744 behind 300 grain 45 cal SST Hornady bullets in that. The two Savages shoot OK, but the two rifles shooting B-B and based on the Arrowhead ignition are in another class, both power and accuracy.

Here's a picture of the loading block I made for this rifle. The little brass modules have a 308 head and use a Large Magnum Rifle primer. My Encore barrel uses modules with a 45-70 head. In the other picture, I am holding a 300 gr Arrowhead bullet and a Parker 300 gr, with one of the Arrowhead ignition modules laying between them. I haven't tried the Parkers, yet, though. It would be hard for them to top what I've gotten from the Arrowhead bullets so far.

 

[Hennig]

The great wall of JAE.

 

[Highbrass]

The great wall of JAE.View attachment 7912252

Those JAE's are just down right sexy !

 

[Anb618]

The great wall of JAE.View attachment 7912252

Love those Topo inspired camo patterns.

 

[Baron23]

The great wall of JAE.View attachment 7912252

Well damn....and I only have two in JAE's. I'm letting down the home team yet again! haha

Of course, neither of mine have cool paint jobs too! haha

Nice looking set of rifles, mate.