Precision Rifles.....show em!!

[PHXLR]

Long time lurker.
Howa 1500 - stock trigger
24" heavy barrel, threaded, Kahn Control Hex Mod brake
.300 Win Mag
Nikon FX1000 MOA 4x16
Brownells/MDT chassis, Ergo grip, Luth AR buttstock
Harris bipod
Have some tweeking to do.

Absolute newbie to the long range game. I've been putting this together for the last six months. Only sixteen rounds thru it so far. Getting a little too old to brave the AZ heat to shoot right now. Going to wait a few more weeks and start shooting again.

 

[DXT_Shooter]

Long time lurker.
Howa 1500 - stock trigger
24" heavy barrel, threaded, Kahn Control Hex Mod brake
.300 Win Mag
Nikon FX1000 MOA 4x16
Brownells/MDT chassis, Ergo grip, Luth AR buttstock
Harris bipod
Have some tweeking to do.

Absolute newbie to the long range game. I've been putting this together for the last six months. Only sixteen rounds thru it so far. Getting a little too old to brave the AZ heat to shoot right now. Going to wait a few more weeks and start shooting again. View attachment 6934533

Nice rifle ??.

I hear you about the AZ heat I am going to head to Rio Salado once it starts cooling down and we get below 100 ?.

 

[BallisticPrimate]

Schmidt & Bender arrived - will stretch its legs next week. Surgeon 6.5x47

 

[Haz251]

Just a mock up as I'm waiting for the PVA barrel nut to show up (PLEASE BE HERE MONDAY).
ARC Nucleus
6.5 Creedmoor NSS barrel
TT Flat Diamond
VG6 PRS65 brake
Original run Bushy XRS (time for an upgrade)
MPA BA Comp chassisView attachment 6936148View attachment 6936148

 

[Temper]

It's "done", whatever that means.

 

[winniethepooh]

It's "done", whatever that means.

View attachment 6936256

Sweet stick but your outdoor arraignment is bad ass

 

[Temper]

Thanks!

 

[Tree]

Getting closer.

 

[Penatrator]

Just finished my first diy multicam job!

Bergara B14 HMR 6.5cm 22"
Bushnell dmr 2
Seekins low rings
Egw 20 moa base
McMillan picatinny bipod rail (long fde)
Atlas bipod

Hope you guise like!

 

[DJ Keyhole]

Just a mock up as I'm waiting for the PVA barrel nut to show up (PLEASE BE HERE MONDAY).
ARC Nucleus
6.5 Creedmoor NSS barrel
TT Flat Diamond
VG6 PRS65 brake
Original run Bushy XRS (time for an upgrade)
MPA BA Comp chassisView attachment 6936148View attachment 6936148View attachment 6936150

Any issues with the CRF?
Did the Nucleus fit the lug lock?

 

[Haz251]

Any issues with the CRF?
Did the Nucleus fit the lug lock?

Still waiting on the barrel nut... So haven't ran it full speed any. Can't get the crf to work with magpul. Even with shortened feed lips. I read some guys got it when they ran the action fast. We'll see hopefully Monday. Will also be trying an AI mag.

Oddly enough my chassis didn't come with a lug lock???

 

[DJ Keyhole]

Still waiting on the barrel nut... So haven't ran it full speed any. Can't get the crf to work with magpul. Even with shortened feed lips. I read some guys got it when they ran the action fast. We'll see hopefully Monday. Will also be trying an AI mag.

Oddly enough my chassis didn't come with a lug lock???

Hmm... I wonder if it was old stock? Did you order from MPA?

 

[Haz251]

Hmm... I wonder if it was old stock? Did you order from MPA?

Ordered from OTM. They told me it was the newest generation. So it should of had it. I seen pictures of someone else's and was like WTF is that?! Where do I get one?
Just unlucky I guess. Might give mpa a call tomorrow

 

[justwoody1]

I named her Big Sexy.

 

[richdinoso]

My first precision rifle:
Curtis Custom Axiom
Green Mountain heavy palma barrel in 308 Win by Keystone Accuracy
XLR Envy Chassis

 

[JC0352]

My 1st non-factory rifle; I love it!
stainless M700 action, trued
Timney 510
Bartlein 24” Rem Varmint contour, 6.5 Creedmor
Manners EH1-A w/ mini chassis
graphite black cerakote
PST Gen 2 in Seekins medium rings
built by J&J Custom Rifles in Haughton, LA

 

[WoobieJ]

DMR LLC built 6.5 Creedmoor
- 24" Proof Barrel / Q Cherry Bomb (waiting on thunderchicken)
- Surgeon action
- Manners PRS2
- Manners Mini Chassis
- Seekins / Vortex Rings
- Vortex AMG
- Coyote Tan Cerakote / Black Cerakote bolt

 

[Nittynate]

It's "done", whatever that means.

View attachment 6936256

Man your outdoor setip rivals most indoor kitchens I’ve seen! This website makes it hard not to start already thinking about next build or to make current one “better.” Beautiful rifle.

 

[Dthomas3523]

Impact Action, Bartlein 26” 6creed M24 contour, PVA brake, JAE chassis, Huber trigger, ARC rings, Minox ZP5 mr4 reticle, atlas cal.

Only awaiting upgrade is a Ingenuity Gunworks AdjustaRail system.

 

[ZeroMOA]

Just got my new all black Desert Tech SRS-A1 back from being cerakoted OD Green and Forest Green! Haven’t shot it yet, but super excited, always wanted a Desert Tech.

Right now I have 6.5 Creedmoor barrel with Nightforce 7-35 ATACR scope. I’m planning to get 22” 308 Win and 26” 338 Lapua barrels later this year.

Picked up a Case Club precut case from Amazon for it was well, so far so go, impressed with the value.

I’m also thinking about getting the Atlas cerakoted OD Green now!?! I really liking the shades of green!

 

[ZeroMOA]

 

[ejg]

Recently got a 3-27PMII to try on my 300wm and for a display at a veterans "meet" in Ireland. Of course I have to test the thing first. Three shots in the garden to zero and get the speed . Forth shot was a sika spike as our season just opened. Nice scope but will have a tough time to compete as my favourite against my 3-20 Ultra Short. Rifle was on here before, DCR action (UK) 24" Lothar Walther barrel, PSE E-Tac4 Rem LA stock, Hausken Suppressor.








edi

 

[ken4570tc in WY]

All very nice!!!

I found this thread after I posted my Ruger Precision pics under the Ruger Precision Rifle Thread. So, in the interest of not drawing admonishment from moderators I'll just suggest you peek over there.

 

[Buckshotu2]

Might as well throw a couple of mine up as well.

-Surgeon 1581
-.338 Lapua
-Bartlein Heavy Palma, 1:9.35 twist
-McMillan A-5
-Badger FTE brake
-Vortex Razor HD Gen2
-Spuhr 9mil mount

-McMillan Bros Tubb 2000
-6.5 Creedmoor
-Nightforce NXS
-Nightforce Rings

Beautiful. Those cloud in the background are fantastic

 

[Buckshotu2]

Recently got a 3-27PMII to try on my 300wm and for a display at a veterans "meet" in Ireland. Of course I have to test the thing first. Three shots in the garden to zero and get the speed . Forth shot was a sika spike as our season just opened. Nice scope but will have a tough time to compete as my favourite against my 3-20 Ultra Short. Rifle was on here before, DCR action (UK) 24" Lothar Walther barrel, PSE E-Tac4 Rem LA stock, Hausken Suppressor.








edi

These landscapes are wonderful. Some good photography!

 

[WoobieJ]

Another shoot of my DMR 6.5CM...

 

[DXT_Shooter]

View attachment 6941205
View attachment 6941206
Another shoot of my DMR 6.5CM...

Very nice rifle...congrats ??

 

[Hondo64d]

Beanland Custom Rifles
Shilen DGR action
McMillan A6 Adjustable in Urban Carbon Ambush
24” Bartlein 5R M24 contour chambered in 6.5 Creedmoor
Mesa Precision Arms bottom metal
Nightforce SHV F1
Seekins Rings

The group is shots 2 - 6 from the rifle. .392” with Hornady American Gunner Ammo. Four 5-shot groups with the American gunner have averaged .478”. I’ve had several custom rifles by some of the best names in the business and have NEVER had a rifle do that with the first rounds ever put through it. I’m pretty stoked about the rifle doing this with factory ammo and can’t wait to see what it will do with a loud tuned for it.

Jon’s work and attention to detail is absolutely amazing and it shows on the target.

John

 

[Covertnoob5]

DMR LLC built 6.5 Creedmoor
- 24" Proof Barrel / Q Cherry Bomb (waiting on thunderchicken)
- Surgeon action
- Manners PRS2
- Manners Mini Chassis
- Seekins / Vortex Rings
- Vortex AMG
- Coyote Tan Cerakote / Black Cerakote bolt

View attachment 6938832
View attachment 6938833

Beautiful gun. What’s it weigh?

 

[6.5 Cravemoor]

After 2 months or so of patiently waiting, my first new bolt action build is complete. Build is almost an M40 clone, because who doesn’t love the M40 platform?? Couldn’t be any happier with how she turned out!

Build specs:
Caliber .308 win
Remington 700 action
Schneider Barrel M40 contour 1:10 twist, 24inch
Mcmillian A5 stock
Badger M5 DBM
Timney 510 trigger
Badger 20 MOA Top rail
Area 419 hellfire brake

Test fire group was 5 shots @ 100 yards with 168grn FGMM

 

[Bchrusciel]

heres my custom mosin m91/30 i built myself

rock creek 23" heavy varmint taper barrel
custom 30moa scope mount
custom relocated bent bolt handle
timney trigger
custom chassis with magwell for detachable archangel mags (built by me)
area 419 hellfire muzzle brake
athlon argos btr 6-24x50 mil/mil

 

[ejg]

These landscapes are wonderful. Some good photography!

Thanks, I need a bit of luck with photography. Love that farm.
edi

 

[JTC1967]

Finally!!! Fucking finally!!!! I have something worth showing on here.

Savage 10 FCP-SR
20" 308
Vortex pst
Bell and Carlson Tactical Medalist A-5

Future upgrades:
In a couple weeks it will have a CDI DBM
22" 260 Rem Pacnor 3 groove barrel


Sent from my iPhone using Tapatalk

Sweet couch man! How do you like the B&C? Is it fully bedded?

 

[JTC1967]

Remington700 5R 20" .308, SiCo Harvester 300, HS precision, S-B PMII 5-25, Badger 20moa rail and M40 rings, Timney 2stage - .5 moa on pump-gas. First LR rig and I'm hooked.

 

[WoobieJ]

Very nice rifle...congrats ??

Thanks! I appreciate it!

Beautiful gun. What’s it weigh?

I haven't weighed it on a scale that can tell me anything more accurate than to the 0.5lb. I need to get one. But it's somewhere between 10-10.5lb.

 

[BearNaked]

Sweet couch man! How do you like the B&C? Is it fully bedded?

Thanks. I love it. I have not bedded it since it shoots great out of the box. I do like the adjustability to it since I don't fit most stocks.

 

[andrews1958]

Came across this picture of a 6.5x47 Robert built me. It is a shooter. One target is a 100 yard 3 shot group while the other is a 4 shot group at that little white spec across the field. 600 yards? The only change I have made since the picture was that I swapped the 12x60 March scope out for a 8x80 illuminated.

The twin he built is identical with the only change being it is in a 260 and has a Schmidt/ Bender 10x50 with Sphur mounts. Just as accurate

Robert and I have shot both rifles probably 30 times for each and since then they have sat in my safe. Probably time to start thinking of selling them as I just don't have the time to shoot them.

Of all the customs I have had built none are more accurate than the ones he has built for me. If you want "one of the finest rifles" money can buy see Robert. You will not be disappointed ,

 

[Wyfox]

 

[Dannyj74]

Here is my newest build.
Reminton 700 sps tactical in coyote tan 22" bull
caliber 6.5 creedmoor
KRG whiskey 3 gen 6 folding
Vortex diamondback tactical 6-24x50
Vortex rings
Harris 12-24 bipod
MDT 10 round mag

 

[grebski]

Long time lurker.
Howa 1500 - stock trigger
24" heavy barrel, threaded, Kahn Control Hex Mod brake
.300 Win Mag
Nikon FX1000 MOA 4x16
Brownells/MDT chassis, Ergo grip, Luth AR buttstock
Harris bipod
Have some tweeking to do.

Absolute newbie to the long range game. I've been putting this together for the last six months. Only sixteen rounds thru it so far. Getting a little too old to brave the AZ heat to shoot right now. Going to wait a few more weeks and start shooting again.

Does the back of that Ergo grip keep the Luth AR from rotating?

 

[Bigwheels]

My latest iteration. On its 3rd brbrl now. 2nd stock & 3rd scope.
300WM. New paint & tgt @ 1715yds.all consecutive shots with a correction.

 

[ctso030]

Got my wife’s new rifle yesterday, 260 AI built by mbgs

 

[bikeracer]

Manners PRS2, Curtis Axiom chambered in 6.5C with Proof 22" Sendero barrel, Timney Calvin Elite, Badger DBM 5, SAS can, Kahles 318i. Purchased off the Hide and have about 300 rounds through it since I bought it a month ago.

 

[John1890]

Sac .308
Alpha II action
Manners T4A

 

[Masba]

That's my TRG-42 .338LM in PAUTAC PAC chassis.

 

[Raptorman2014]

6XC
Impact action
TT diamond
26" m24 rock creek 1:8
Manners prs2 in GAP

 

[lts1ow]

Still needs glass, and a brake.

Remage setup on a factory rem 700 SS action, Mcgowan full contour 26" 1:7 6mm creed, trigger tech, and an XLR chassis. Prob toss a XTRii or T5xi on it come October

 

[mudpig]

The finished product and results of the first trip to the range

 

[Hunt4em]

Man those are some fine looking rifles!

 

[bads1buell]

GA Precision Left Hand 308
McMillan A5
TT Special Trigger
24" Rock Creek Barrel
Badger Base, Rings, M4 Bottom Metal
Leupold Tactical LRP