-
Having trouble using the site?
Contact support
Finished putting this together today.
Bergara BMP 6.5
Gen ii Razor 4.5x27
Atlas bipod
Bergara BMP 6.5
Gen ii Razor 4.5x27
Atlas bipod
Attachments
Last edited:
6.5 SAUM
Bighorn TL2 SA Action
30” Bartlein AMU
McRee Precision R7ST G5+ Chassis
Vortex Razor HD Gen 1
Harris Bipod
SilencerCo Specwar Quick Attach Flashider (suppressor not pictured)
Tactical Tailor Stock Pouch
Bighorn TL2 SA Action
30” Bartlein AMU
McRee Precision R7ST G5+ Chassis
Vortex Razor HD Gen 1
Harris Bipod
SilencerCo Specwar Quick Attach Flashider (suppressor not pictured)
Tactical Tailor Stock Pouch
Attachments
Last edited:
Remington 700 308 CDI bottom metal Leupold mk4 egw rings tps base b&C M40 stock custom cerakote kryptek
Here is my new rifle, it is a Dane Miller machined (DMR) Bighorn TL3 in 6.5PRC. And also a few of the guns that got me started.... waiting the muzzle device for the new rifle and rings to put my other new PMII on the Kimber...
And a few of the other rifles that got this started...
And a few of the other rifles that got this started...
I know it needs taller rings this is the mock up couldn’t wait to get it all assembled
Curtis custom vector action
Shouldered 26in 260 rem turned by area 419
Area 419 hellfire
Triggertech diamond flat trigger
Krg bravo backbone inleted by northeast gunworks
Atlas bipod
Vortex razor hd gen ii ebr-7c
Work in progress
Curtis custom vector action
Shouldered 26in 260 rem turned by area 419
Area 419 hellfire
Triggertech diamond flat trigger
Krg bravo backbone inleted by northeast gunworks
Atlas bipod
Vortex razor hd gen ii ebr-7c
Work in progress
Since I am new here, I might as well show my rig. 
Tikka T3 Tac
KRG Bravo Chassis
Kahles K624 - AMR on MAK Rings
Roedale Muzzle Break
Harris Bipod
I am very happy with the setup and can't wait to go out to longer distances. 100m groups attached (the slipup on the bottom left was me not the rifle - there is always the one, haha )
Tikka T3 Tac
KRG Bravo Chassis
Kahles K624 - AMR on MAK Rings
Roedale Muzzle Break
Harris Bipod
I am very happy with the setup and can't wait to go out to longer distances. 100m groups attached (the slipup on the bottom left was me not the rifle
- there is always the one, haha )Attachments
Last edited:
I just ordered their hellfire for my Bergara bpr 17. Their timing design and muzzle brakes are simply amazing.
That is Atlas accu-shot Sako TRG picatinny mount.
With a little tuning, it will work just fine in Bravo too.
For sure it is not as good as the KRG spigot mount is, but will do the job.
three of a kind.
All rifles are Tikka T3X model series.
2 x CTR
1 X TAC A1, but it is now TAC BRAVO
All rifles are Tikka T3X model series.
2 x CTR
1 X TAC A1, but it is now TAC BRAVO
three of a kind.
All rifles are Tikka T3X model series.
2 x CTR
1 X TAC A1, but it is now TAC BRAVO
View attachment 7058725
I can’t see anything
Tikka TAC A-1 6.5 CM
Sightron SIII 8-32x56 Larue mount
Versapod bipod
SilencerCo Omega
AXMC 338 Norma is on it way...
Sightron SIII 8-32x56 Larue mount
Versapod bipod
SilencerCo Omega
AXMC 338 Norma is on it way...
Here are the four I tend to shoot on my range as much as possible (maybe 200 nice days per year?). They are
from left to right:
Remington 700 eXtreme Tactical Rifle XTR with triangle barrel, Nikon P308 scope, Timney 510 trigger (XMP trigger had gotten recalled), Magpul 700H. Only knock on that setup - you have to take off the cheek rest to get the bolt out (only an issue on long action).
Remington 700 P Tactical Weapon System, completely stock. The scope it comes with is the Leupold LR/T Mildot Illuminated. I added a Witt Machine brake. and it had some trigger work done by Ilion.
Remington 700 P Light Tactical Rifle LTR. That has the Springfield Armory Government Gen III scope. The addition I made was to add a Wyatt Detatchable Magazine setup and had some trigger work done by Ilion.
Remington 700 SPS Tactical AAC-SD Coyote Tan 6.5CM. This has a Vortex Viper on it (I think 6.5-25x50?), a Magpul 700H stock, the Magpul floorplate with external AICS magazines.
I do have a collection of Remington Classic in various years; but I don't shoot those because you cannot replace them. So they are safe queens.
from left to right:
Remington 700 eXtreme Tactical Rifle XTR with triangle barrel, Nikon P308 scope, Timney 510 trigger (XMP trigger had gotten recalled), Magpul 700H. Only knock on that setup - you have to take off the cheek rest to get the bolt out (only an issue on long action).
Remington 700 P Tactical Weapon System, completely stock. The scope it comes with is the Leupold LR/T Mildot Illuminated. I added a Witt Machine brake. and it had some trigger work done by Ilion.
Remington 700 P Light Tactical Rifle LTR. That has the Springfield Armory Government Gen III scope. The addition I made was to add a Wyatt Detatchable Magazine setup and had some trigger work done by Ilion.
Remington 700 SPS Tactical AAC-SD Coyote Tan 6.5CM. This has a Vortex Viper on it (I think 6.5-25x50?), a Magpul 700H stock, the Magpul floorplate with external AICS magazines.
I do have a collection of Remington Classic in various years; but I don't shoot those because you cannot replace them. So they are safe queens.
My Walküre in her natural Habitat, launging lazy in the sun waiting for some targets of opportunity
And my trusty workhorse CTR, denying a pass over the mountains to the barbarians.
On that AI, is it just me or does your scope look rotated clockwise? If you draw a line on the butt stock screws, it looks like the rifle is tilted left a little and scope rotated clockwise.
Out with my PGWDTI Coyote (.260 Rem) doing some tripod practice for this years Sniper's Hide Cup.
The buttpad assembly of the rifle had an adjustable can't to fit your shoulder pocket. I have mine canted a bit
Sorry don’t know how the other pics got there
Here is another addition. Damn I got too many chassis lol love the J Allen though. Shout out to Swanny for the graffiti!
Just had a new barrel spun up by Insite Arms and decided to head to the range.
Surgeon 591
X-cal Cryo Heavy Palma 24"
Vortex Razor AMG
Surgeon Bottom Metal
Manners T5A Elite Carbon
Insite Arms Heathen Brake
Surgeon 591
X-cal Cryo Heavy Palma 24"
Vortex Razor AMG
Surgeon Bottom Metal
Manners T5A Elite Carbon
Insite Arms Heathen Brake
Not sure if you're asking this to me, but it's the local club range. It's an old gravel pit that has been turned into a 100 yard rifle range with a few pistol bays.
Looks like the ergo tactical, it comes with the chassis so it might be slightly modified for Cadex, I cant tell.
Wow, just went through all 24 pages. Some amazing rifles on here. Tonight I need to take some nice pics of my bolts and post them. Not sure if I will fit in though. I don't have any 6.5CM or 2 round side patches LOL Apparently both of those are a requirement to join this forum lol
JK nice rifles boys!
JK nice rifles boys!
Put this together this weekend
Bighorn Origin
B&A Tacsport Pro single stage
Criterion 26" dasher
MDT ACC
Bighorn Origin
B&A Tacsport Pro single stage
Criterion 26" dasher
MDT ACC
6.5 Creemoor build.
Defiance Deviant, Proof 22" 1-8tw, Trigger Tech Special, Manners PRS1, Seekins Rings, Kahles 5-25i
It came together nice!
Defiance Deviant, Proof 22" 1-8tw, Trigger Tech Special, Manners PRS1, Seekins Rings, Kahles 5-25i
It came together nice!
Swift Creek Rifles
22" 6.5 Creedmoor Bartlein 7.5t Heavy Palma
Kelbly's Atlas Tactical Action
TriggerTech Special Traditional Curved
MPA BA Hybrid Chassis
ARC Low Rings
Mark 6 3-18 TMR
Atlas Bipod
14.0lbs
22" 6.5 Creedmoor Bartlein 7.5t Heavy Palma
Kelbly's Atlas Tactical Action
TriggerTech Special Traditional Curved
MPA BA Hybrid Chassis
ARC Low Rings
Mark 6 3-18 TMR
Atlas Bipod
14.0lbs
Last edited:
Your reloading bench has nicer counter tops then my kitchen ?
