Precision Rifles.....show em!!

[Punkur67]

Took my 300wm out today. First time beyond 1000 yards. Farthest shots were 1242 and 1567

 

[kthomas]

Got the wife's suppressor out of jail and on her rifle:

6BRA chambered up by TS Customs.

- Lone Peak Fuzion action
- 1:7.5 24" Brux heavy Palma barrel
- BnA Tacsport 2 stage trigger
- KRG Bravo chassis custom painted by Custom Gun Coatings
- SiCo Omega suppressor
- Steiner M5 with MSR reticle
- ARC M10 rings

 

[kthomas]

Outdoor photo shoot, because I'm bored:

 

[Clark]

This is a 6.5-06 I built on an old Rem 700 action with a Bartlein barrel.

This is a 280AI I built on a pre 64 Win M70 action with a Bartlein barrel

I build so many rifles, I can't remember them unless I put tags on them.

 

[Steel head]

Here are the AI's. Top to bottom PSR 338LM, AIAX 6.5CM, AIAT 6CM AND AIAE .308
View attachment 7268545

AI AT in 308
View attachment 7273838View attachment 7273839

My normal reaction to Green AI’s

 

[Steel head]

My ole savage living the good life.
Still chambered in 260 Master race.

 

[Blackfoot 7]

 

[viking78]

Some tuned Tikka.
Only KRG for me

 

[Blackfoot 7]

 

[PAYDIRT]

"New" X-Ray on my comp rifle. I don't mind leftovers/blems/rattle can camo/2nd hand. Even pawn shop wedding rings deserve a 2nd chance. Lol

 

[Silvan]

Sako TRG 22A1

 

[viking78]

Sako TRG 22A1View attachment 7280036View attachment 7280038

Nice

 

[NiemiPT]

Sako TRG 22A1View attachment 7280036View attachment 7280038

Nice low profile Harris installation. What's in between of picatinny and Harris?

 

[perttime]

Sako TRG 22A1View attachment 7280036View attachment 7280038

What is the overall weight?

 

[Silvan]

What is the overall weight?

Almost 19 lbs with empty mag.
The 22a1 is quite heavy itself.

 

[Silvan]

Nice low profile Harris installation. What's in between of picatinny and Harris?

It’s an M-Lok Harris adapter. I don’t remember a company name, unfortunately.
The 22A1 and new M10 hand guards are M-lok instead of picatinny.

 

[Silvan]

All TRG 22A1 are imported to the US in black/gray color.
Before and after

 

[NiemiPT]

It’s an M-Lok Harris adapter. I don’t remember a company name, unfortunately.
The 22A1 and new M10 hand guards are M-lok instead of picatinny.

I see. I have same kind of adapter in my PSE E-tac stock. So new M10 are all with M-lok? That would be really nice since I have one already in my CTR. It seems to be way lower profile than one with picatinny. I got a licence for lm and I have been eyeballing one used M10 and it has picatinny ?

 

[Simia Dei]

All TRG 22A1 are imported to the US in black/gray color.
Before and after

Rattlecan?

 

[Silvan]

So new M10 are all with M-lok? That would be really nice since I have one already in my CTR. It seems to be way lower profile than one with picatinny. I got a licence for lm and I have been eyeballing one used M10 and it has picatinny ?

Yes, all new M10s come with M-lok type of connection.

 

[Silvan]

Rattlecan?

Yes, close to it but not exact the same. Several shadows of brown color.

 

[Braxtond]

View attachment 7279955

"New" X-Ray on my comp rifle. I don't mind leftovers/blems/rattle can camo/2nd hand. Even pawn shop wedding rings deserve a 2nd chance. Lol

Is that a remage?

 

[PAYDIRT]

Is that a remage?

Yes. Criterion.

 

[Braxtond]

Yes. Criterion.

How do you like it? I’ve considered getting SPR to do one of their bugnut barrels for mine

 

[Blackfoot 7]

 

[PAYDIRT]

How do you like it? I’ve considered getting SPR to do one of their bugnut barrels for mine

My next barrel will be another Criterion.

 

[John Glidewell]

Custom Savage, 28" Bartlein 1-8 twist, PVA barrel nut, Elf trigger, XLR chassis, Riton X7 4-32×56 with Seekings rings. Group below is 144 Bergers, CCI BR2 and 42 grains of RL16, 2866 fps.

 

[Anb618]

Took my coyote rifle out for some 50gr VMax testing. Switched brass and optic and decided to rework.
CZ 527 Varmint Kevlar - .223 Rem

And my best group of the day. Cherry picked, but clearly in the middle of an accuracy node.

 

[Redonthehead]

Ready to Zero! Finally got my first ELR rifle put together after scrounging hand-me-down parts and online sales. Was my hunting rifle for over 25 yrs.

Components: Weatherby Vanguard (Howa) 24" 7mm Rem Mag; original dual adj trigger; MDT chassis; Ergo grip; Magpul bipod; Luth-AR MBA3 stock; Vortex Strike Eagle 4-24x50 on 20 MOA rail; muzzle brake from Witt Machine.

Cheers,
Red

 

[Thecelt]

I like this, is it the 700 2nd gen 5r? What stock is that?

 

[Blackfoot 7]

I like this, is it the 700 2nd gen 5r? What stock is that?

R700 Gen 2 5R 6.5CM w/ custom Grayboe Renegade stock.

 

[Thecelt]

R700 Gen 2 5R 6.5CM w/ custom Grayboe Renegade stock.

Custom woodland camo i gather? Where did you get it done, it came out badass.

And how does she shoot?

 

[Blackfoot 7]

Grayboe custom shop did the work. M81 woodland hydrodipped. The rifle was doing half a minute before I switched out the stock. I bedded the recoil lug slot on this stock and I suspect it'll either retain that accuracy or do better. I haven't had a chance to shoot it yet. Mainly because of COVID-19 and my unwillingness to venture out to my indoor shooting range.

 

[ejg]

With our little country going into lock down.... got some fresh air. Could shoot 2 of them, forgot the ammo for the 300wm... damn.

left to right. T3 20" 308 CTR, Rem 700 6.5CM Hardy carbon, Ultimatum Deadline 300wm IBI barrel.
edi

 

[wareagle700]

Lightweight Precision

 

[Longshot231]

I still have to see how this thing groups with some better ammunition. I bought the Mossberg MVP patrol rifle with the desire to have a truck-gun. I wanted an inexpensive, lightweight bolt action carbine, chambered in 5.56mm and took AR-15 magazines.

One thing led to another and I kept adding parts. What started out as a $500 rifle has turned into something else.

Mossberg MVP.................................................................................$500
Vortex Optics Viper PST Gen II Rifle Scope........................$900
Vortex Bubble Level........................................................................$35
Vortex Optics Switchview Throw Lever..................................$60
Burris 30 mm Signature Rings.................................................$100
Magpul Bipod..................................................................................$125
Hawk Hill Spiked Bipod Feet......................................................$60
Aramageddon Gear Carbine Sling............................................$45
MDT Chassis with all the bells & whistles......................$1200
OSS Suppressor w/Tax Stamp...............................................$1300
Cole-Tac Suppressor Wrap.........................................................$120
Approximate shipping and taxes...........................................$250

Total cost for the Franken-Mossberg Fun Package....$4695

Fun factor ..............................................................................Priceless!

I don't know what came over me.

 

[Anford10]

My most recent build..

.338 LM
Defiant Action
Shilen 1-8 twist @ 26"
MDT ACC
NF NXS 5.5-22x56
*Harvester 338 in transit

 

[Redonthehead]

Wrap.........................................................$120

I don't know what came over me.

View attachment 7284327View attachment 7284328View attachment 7284329

$120 for a suppressor wrap? I'm thinking of a new home based business!

 

[droppndrakes]

My first custom:
Beanland 7mm rem mag
Defiance Deviant GA Hunter
Manners EH1 w/ Henderson 3” Arca rail and atlas 4” rail & flush cups
25 1/4” Bartlein Light Palma - straight Flutes with slightly custom contour
Cerakote - Cobalt
Hawkins BDl
Triggertech Diamond
Swarovski Z5 3.5x18 sitting in seekins lows.
8lbs 4oz bare and 9lbs 10oz w/ scope & rings

 

[Tokay444]

Dryfire Sundays .

 

[eldritch]

Here's my Dasher.
Zermatt Origin
Proof Competition contour @26" 1-7.5 twist
SilencerCo brake for SpecWar 7.62
Timney Calvin Elite
Manners PRS-1 Altus Meadowlands
Hawkins DBM
Nightforce NX8 4-32x50 w/ Mil-XT reticle in a Spuhr mount

 

[NiteQwill]

Accurate Ordnance TMR (Sad to know Mark closed up shop)

• 6.5 Creedmoor
• Stiller Tac30AW Action
• Brux 24" Heavy Varmint/Sendero
• Manners T4A Midnight Camo
• Vortex Razor HD II EBR2C
• Seekins Rings
• Tenabrex caps
• Atlas Bipod
• Omega 300 (However, generally shot with a APA Little Bastard 90% of the time)
• Cerakote in blue titanium to match the stock
• Grouping here speaks for Mark's talent and pride in his builds
• 
• Shot using a Fujifilm 56 mm f1.2

 

[Dj907]

6.5 Creedmoor

 

[Dgarzajr]

Remington 700 action
Benchmark m40 barrel
Area419 break
Trigger tech flat trigger
Manners prs1
Atlas bipod
Vortex viper pst gen2
Built by Apache Rifleworks Comfort, TX

 

[Hypersportscody]

Manners EH1
Rem 700 LA 300 WM
Trigger Tech
212 ELD-X
80 Grains of Retumbo
3004 FPS

 

[USMCSGT0331]

 

[Nosteponsnek]

My 300 win mag. It’s a Remington 700 5r gen2 upgrades are
Manner t4a
Surgeon bottom metal
Nightforce ultralight rings
Krg bolt lift knob
Surefire mb762-211c
And a vortex pst 4-16x50 ffp gen 1
Cerakote done by me back in 2012

 

[Nosteponsnek]

thats a sweet collection you got there happy 0331 day also gunz up!!!

 

[eazy e]

Finally able to join the bolt gun fun! been running gassers for years and finally made the plunge.

XLR Envy Chassis
Lone Peak Fuzion action
24" proof 6mm creed
trigger tech

Looking to get some Spurh rings soon but so far it runs good

 

[mese341]

trued Remington 700
Krieger 1 in 8 22br rem varmint
Timney Calvin elite trigger
Manners stock with mini chassis