Hello i´m new to this forum want to show you my first rifle and i am pretty happy with it.
Remington 700 SPS Tactical .308
Choate Tactical Stock
Roedale Precision Bolt Knob
Harris Bipod
Blackhawk Stockpack
[/QU
Lookin Good!
-
Having trouble using the site?
Contact support
precision rifles... show em
- Thread starter redneckbmxer24
- Start date
With the Kahles 624i Gen II
With the NF ATACR
Papa,
That is bad ass!! Gotta love the ATACR!! Big step up from the NXS's!
Don't stop there, tell us what it is!Took this bad boy to the range yesterday and shoot really well!
Defiance Deviant action left hand bolt w/ right loading port, chambered in 260Rem, Obermeyer 25" barrel, Rock Solid stock, Atlas bi-pod and topped with a Bushnell HDMR H59
Sorry about that. It's a Remington 700 .308 action trued and blueprinted, lapped the lugs, badger tac knob, Bartlien 1:11.25 5R M24 contour barrel, Holland radial muzzle brake, badger bottom metal, Timney 510 trigger set to 1.5 lbs., Manners T4A stock in midnight camo, Harris bipod, Leupold Mark 4ER/T 6.5-20X50MM TMR FFP M5 turrets, Mark 4 base and rings... It was all put together by a local gunsmith that builds rifles for f class and bench match guys.
Here is a picture of the first three shoots of the day at 100 yards, measured the outside to .412, minus the .308 of the bullet leaves me with a .1 MOA rifle and round with berger 168's hybrid rounds:
Happy shooting!
I haven't owned a bolt gun in 5 years and decided I needed to get one. Been working on this for the last six months and finally finished and will sight in on my next day off.
Meet Patsy, My 308
She started life as a Remington 700 AAC-SD. I trued the action fluted bolt. Made an extended bolt knob, fitted a holland oversized firing pen, slapped a badger m16 extractor on then lapped the lugs to the action. The action was trued, scope holes were retreaded 8-40 and drilled 2 indexing holes for a precision pen kinda exactly like stiller actions. I set the barrel back, installed a holland .300 recoil lug and rechamber the barrel for 308AI. Fixed the crap muzzle threads and crown too. Stole some grocery money for an awesome XLR chassis, bedded it and sprayed some duracoat on her. Put a trusty leupold 4.5-14x50 on her. I'm sure she will change some more very shortly.
She started life as a Remington 700 AAC-SD. I trued the action fluted bolt. Made an extended bolt knob, fitted a holland oversized firing pen, slapped a badger m16 extractor on then lapped the lugs to the action. The action was trued, scope holes were retreaded 8-40 and drilled 2 indexing holes for a precision pen kinda exactly like stiller actions. I set the barrel back, installed a holland .300 recoil lug and rechamber the barrel for 308AI. Fixed the crap muzzle threads and crown too. Stole some grocery money for an awesome XLR chassis, bedded it and sprayed some duracoat on her. Put a trusty leupold 4.5-14x50 on her. I'm sure she will change some more very shortly.
Attachments
I had my AICS700 chopped to 20" and had the AICS stock Hydro dipped in carbon with a mat clear finish.
Pretty chuffed with the result.
Pretty chuffed with the result.
My (best) contribution... 700P cut to 16", McRee Precision Compact folding chassis and a Leupold 4-14.
Her is mine.
The trg are able to put 10 shots at 500 meters within 5x5 cm
I'm waiting on a brake to the blaser, so I haven't shot it much yet.
Blaser lrs2 338 Lapua magnum.
Sako TRG 21. 6,5x47 Lapua with KRG Whiskey3 folding stock and A-tec maxim moderator. Barrel is 41 cm. The scope is a Falcon Menace 5.5-25x50 ffp mil/mil. The scope is going on the blaser when the trg Sogn gets sold
The trg are able to put 10 shots at 500 meters within 5x5 cm
I'm waiting on a brake to the blaser, so I haven't shot it much yet.
Blaser lrs2 338 Lapua magnum.
Sako TRG 21. 6,5x47 Lapua with KRG Whiskey3 folding stock and A-tec maxim moderator. Barrel is 41 cm. The scope is a Falcon Menace 5.5-25x50 ffp mil/mil. The scope is going on the blaser when the trg Sogn gets sold
GA Precision SCLE Rem 700 .308
I can't get enough of field pics with an awesome rifle in the mix. Nicely done.
Regards,paul
Sako TRG-22 folder, Benchmark 243 medium Palma @ 24" threaded, chambered for dtacs
338 Edge, Manners stock, trued Rem stainless action, Benchmark 27.5" barrel Senduro contour fluted with Benchmark brake, jewell trigger
338 Edge, Manners stock, trued Rem stainless action, Benchmark 27.5" barrel Senduro contour fluted with Benchmark brake, jewell trigger
FN A3G FBI Tactical SPR Rifle .308, 24" Mil-Spec Fluted Barrel, McMillan Stock, OD Green Finish with a NightForce NXS 3.5-15x50, F1 optic and a SKD PIG Rifle Stock Pack.
Just had a couple barreled actions spun up that I dropped into AX chassis.
308 in the front, 338 in the back.
Built by Sean at North Shore Barrels in Ontario, Canada
308 in the front, 338 in the back.
Built by Sean at North Shore Barrels in Ontario, Canada
Last edited:
i don't think a single one of my guns matches another... except maybe my two KMW sentinel builds
l
A Rem 700 7mmRemMag, a commercial Mauser 260, a Rem pump 22 rimfire, and 1885 falling block 257 Roberts Ackley Improved rimmed
I just need some rings.
Specter DR for shits and giggles
Who makes that top pic rail in the picture?
Looking at picture threads like this can really get me into trouble. I always want to upgrade my LR and precision rifles, and by visiting pages like these only plants bad seeds....
260 rem.
Pierce action
Bartlien 1/8 HV contour
Manners T3
Done by Sean at Northshore Barrels up in Canada.
Nice stick! You got a great deal on that barreled action, I tried to to snag it off the EE but you beat me to it. Congrats, and how does it shoot?
Jay
So I've refrained from posting my rifle since it basically looks like pretty much half of the rifles on this thread, but sine everyone like scenic pics here you go!
Rem 700 SPS-V 26"
AICS 2.0
Viper PST 6x24 FFP
Timney 2# trigger
Scope rings are higher than I'd like, and I really want to put a removable break on it sometime soon but it shoots like a dream!
Waiting for the fog to clear to see our 600yd, 850yd and 1k yd targets
Rem 700 SPS-V 26"
AICS 2.0
Viper PST 6x24 FFP
Timney 2# trigger
Scope rings are higher than I'd like, and I really want to put a removable break on it sometime soon but it shoots like a dream!
Waiting for the fog to clear to see our 600yd, 850yd and 1k yd targets
GAP Custom 6.5x47L
Manners T2-A w/MCS Mini-Chassis (ATACS hydrodip by South Mountain Aquagraphics. (South Mountain Aqua Graphics. )
20" Bartlein 1:8. Light Palma contour.
Templar action. Huber trigger
Steiner 3-15x50 MSR CW
Had this gun for a year or so with the original black stock I ordered with the gun. Looked like shit to me so I just had the stock dipped in ATACS. Now I like it!
Manners T2-A w/MCS Mini-Chassis (ATACS hydrodip by South Mountain Aquagraphics. (South Mountain Aqua Graphics. )
20" Bartlein 1:8. Light Palma contour.
Templar action. Huber trigger
Steiner 3-15x50 MSR CW
Had this gun for a year or so with the original black stock I ordered with the gun. Looked like shit to me so I just had the stock dipped in ATACS. Now I like it!
Last edited:
my 223
223 sps tactical 17" barrel, aac 51T brake
timney trigger
HS precision stock
badger bolt knob.base.rings
NXS 3.5-15x50 NP-R1
triad stock pack
crown royal rear bag
prs small tripod
223 sps tactical 17" barrel, aac 51T brake
timney trigger
HS precision stock
badger bolt knob.base.rings
NXS 3.5-15x50 NP-R1
triad stock pack
crown royal rear bag
prs small tripod
Last edited:
6.5mm Creedmoor match rifle
Short barrel 6.5mm Creedmoor
What chassis is that on the short barrel 6.5
Rem 700 SPS Tactical
Xmark pro trig
B&C Meadalist A5
BlackHawk 20MOA rail
Vortex Precision rings
Vortex PST 6-24 X 50
KRG Bolt lift
Inagural session....
Initial zero 100m
Federal Sierra MK BTHP 178gr
Remington 700 AAC-SD .308
Mcmillan A5 Stock
Seekins Base
TPS Rings
Vortex Viper PST 4-16X50
JB Weld and Sandpaper for bolt knob lol
