precision rifles... show em

[Asht0n86]

Pic of the Flatline Ops hardware

 

[tui_man]

Something a little different

My new 7mm screamer.
175 nosler long range accubonds at 3375ft

Weights in at 3.31kg

All built by myself am very happy with the end product going to have some fun with this one

Sent from my GT-I9300T using Tapatalk

 

[topslop1]

 

[jrr051468]

 

[rcampbell]

Here's my humble setup. It's a 40-XBR action, a run of the mill 5.5-22 NXS and Robertson Composites Tac stock. Haven't fired it yet, but it will see lots of use this summer! It's a .308...for now. Once I wear out that barrel, who knows, perhaps it will be a sassy 6.5 of some flavor.

 

[308sniper147]

Something a little different

My new 7mm screamer.
175 nosler long range accubonds at 3375ft

Weights in at 3.31kg

All built by myself am very happy with the end product going to have some fun with this one

Sent from my GT-I9300T using Tapatalk

Very cool looking rifle. I'm interested in the groups, as well as some donations instead of spending money on those noslers

 

[lostcoyote]

surgeon xl action
krieger mtu straight taper 28"
badger fte brake
mcmillan a5
jewell trigger
badger 34mm rings
5x25x56 steiner mrad/MSR

 

[Jim338]

Here's my .338 Edge. Built it myself. Stiller Tac 300 action. Jewel trigger. 29" Bartlein barrel fluted. Cerakote. NF scope Shoots better than I can

 

[Individual1]

New Laser

Accurate Ordnance:

6.5 Creedmoor
24" Bartlein 1:8 Rem Varmint Contour
McMillan A5 adjustable
Stiller TAC30AW
Timney Thin Shoe 2.4lbs
Badger M5/AW
5/8x24 TB

 

[tui_man]

Very cool looking rifle. I'm interested in the groups, as well as some donations instead of spending money on those noslers

I have not heard of anyone having luck with the 175s at speed?

They are 10thou off and just shoot on matter how hard I pushed the up in the mid 3450 3460 still around .5 just hard on brass. Have enough to burn this barrel out so I'm happy

Sent from my GT-I9300T using Tapatalk

 

[Dead is better]

This is my rifle in progress. Its a T3 sporter 6.5x55 with a shiney new 3-24x42 March / Spuhr mount, Hardy's suppressor. I haven't fired a single shot using the new scope so fingers crossed.

 

[5RWill]

Won't be here until Friday; personal photos to follow...

6.5 Creedmoor, 24" Bartlein 1:8 Rem Varmint Contour, McMillan A5 adjustable, Stiller TAC30AW, Timney Thin Shoe 2.4lbs, Badger M5/AW and 5/8x24 TB.

Bigger pic?

 

[DepthAfield]

Here's my humble setup. It's a 40-XBR action, a run of the mill 5.5-22 NXS and Robertson Composites Tac stock. Haven't fired it yet, but it will see lots of use this summer! It's a .308...for now. Once I wear out that barrel, who knows, perhaps it will be a sassy 6.5 of some flavor.

I'm really curious about the buttpad adjusted up so high. Cannot wrap my brain around how you could possibly use the cheekrest without breaking your neck.

 

[5RWill]

Updated pic maybe..can't remember if i posted this picture this year or not.

 

[rcampbell]

I'm really curious about the buttpad adjusted up so high. Cannot wrap my brain around how you could possibly use the cheekrest without breaking your neck.

I was just trying different settings. I may actually need to update the pic soon as I may be switching to an AICS chassis.

 

[DepthAfield]

I was just trying different settings. I may actually need to update the pic soon as I may be switching to an AICS chassis.

Ah cool. You had me going there and I thought about it way more than I needed to.
If you go with an AICS I would heartedly recommend the adjustable butt on it. Made a world of difference, along with the spacers.

 

[ImKu]

<a href="http://s1285.photobucket.com/user/ImKu/media/20130811_222530-1_zps7351dcb8.jpg.html" target="_blank"><img src="http://i1285.photobucket.com/albums/a586/ImKu/20130811_222530-1_zps7351dcb8.jpg" border="0" alt=" photo 20130811_222530-1_zps7351dcb8.jpg"/></a>
Remmy LTR


<a href="http://s1285.photobucket.com/user/ImKu/media/f8912622-ff82-4018-8cf0-3650a263a79e_zps8f7396b0.jpg.html" target="_blank"><img src="http://i1285.photobucket.com/albums/a586/ImKu/f8912622-ff82-4018-8cf0-3650a263a79e_zps8f7396b0.jpg" border="0" alt=" photo f8912622-ff82-4018-8cf0-3650a263a79e_zps8f7396b0.jpg"/></a>
AI MKIII before


<a href="http://s1285.photobucket.com/user/ImKu/media/20140102_184853-2_zpsihzlf0mu.jpg.html" target="_blank"><img src="http://i1285.photobucket.com/albums/a586/ImKu/20140102_184853-2_zpsihzlf0mu.jpg" border="0" alt=" photo 20140102_184853-2_zpsihzlf0mu.jpg"/></a>
After

 

[T2CH]

Tactical Operations Delta 51

 

[Iron Worker]

My Tactical rifle

My entry level tactical rifle. Trued Mod 70 CRF action 26" Brux bbl. Precision stock works tactical/hunter stock made by Macmillan in 7 WSM .

 

[RobertB]

One on top.

 

[BonaNox]

Few of my 700's

 

[308sniper147]

View attachment 29412

Few of my 700's

Those are beautiful rifles what is the specs on the one on the right?

 

[DRAGON64]

I like it myself... not over complicated, just simple elegance, very nice!

It ain't much, but it's what I got, and I like it.

 

[IndianaRem5r]

Remington 700 5r Milspec .308 24" barrel
SS12X Scope

 

[cshann55]

The "custom sandbag " is my fav so far.
Beautiful shooting irons. Guess I need to take some pics too

 

[BonaNox]

Thank you sir. On the right is a

Rem 700 SA in .22-250
26" Kreiger Heavy Varmint
Bell & Carlson tactical hook
Timney adjusted to 2lb
Eagle Stock Pack
Harris bipod
Vortex Viper 6.5-20x50
Weaver Rings

 

[gunnut1825]

Hey Blackops_2
That's a nice looking bolt gun you have there. I'm interested in knowing what stock you have, bottom metal, and barrel contour. Thanks

 

[308sniper147]

Thank you sir. On the right is a

Rem 700 SA in .22-250
26" Kreiger Heavy Varmint
Bell & Carlson tactical hook
Timney adjusted to 2lb
Eagle Stock Pack
Harris bipod
Vortex Viper 6.5-20x50
Weaver Rings

That sounds like a coyote gun!
That sounds like a great set up.

 

[IndianaRem5r]

Maybe there should be a separate thread "custom sandbags, show 'em". The custom sandbag does function quite well.

The "custom sandbag " is my fav so far.
Beautiful shooting irons. Guess I need to take some pics too

 

[JBomb]

GA Precision 6.5 Creedmoor
Badger Ordnance M2013
KRG Whiskey 3

 

[RStewart]

 

[Scotty22]

Good looking stick right there

 

[cshann55]

OK maybe i should add one while I work on my sandbag.

Remington 700 AAC-SD w/ Blackout FH 308 WIN
Bell and Carlson Tactical Medalist Type 3
MIllet 0 MOA Rail and Mounts
SWFA SS 10x42
Tuned, fluted, bolt with Fat Knob and skeletonizing
Bedded, tuned, and tweaked
Now with Atlas Legs
Tactical Custom matched Labrador in Desert Tan (My Shot caller)

 

[tackleberry2000]

Heres my updated 20" Remington. Started as a SPS tactical and still has the factory barreled action. Leupold 8.5-25x50 w Hourus retical and M5 mil/mil turrents. MK 4 rings and 20 MOA base, Accuracy first level and Timnwy trigger. Jus dropped it in the AICS chassis and added viper skins. Forgot name of muzzle brake. Tubb firing pin and Atlas bipod w sipke feet.

Shot group was while it was in a HS precision stock. The three out side rounds were while adjusting zero and the three in one group was the end result. Used FGMM 168gr factory loads at 100yds. Calculator says .2 dispersion.

 

[S12A]

AI AX 308 24 inch barrel
will be scoping with an S&B 3-20 MSR

 

[SNAFU308]

 

[MPrimo]

Some crappy pics of my Souther Precision Rifles built R700 in 308. MTU contour barrel at 20", Surefire brake, Manners stock T4, Bolt fluted by Longrifles and Razor scope.

 

[Ledzep]

Here's my new LRI build. I ordered it before I deployed last summer and Chad delivered it in person to my family in January while doing the SHOT show thing (I'm sure they told you, but thanks again, Chad). Obviously I haven't handled it yet, but from speaking with my family members, and the few pictures I've got from them, I'm pretty happy as I sit now-- Impatiently waiting to get home and take it for a test ride.

SS Rem 700 SA action and LRI's recoil lug
Bartlein 1:8" twist .260, finished at 22", Rem. Varmint contour, LRI 7-flute pattern
Manners MCS-T stock, LRI full bedding job and paint (colors are a little "blue" in the lighting in my house).
Jewell trigger
PTG DBM
EGW 20 MOA 1913 rail

Once I get back, a Leupold Mk6 3-18x44 TMR, Turner sling, and a Harris bipod will find new homes on this rifle. I've got about 2,000 rounds worth of components sitting around and cannot wait to get home and burn through it.

I should be moving to near Rapid City this summer, too. Stand by, local wildlife.

 

[krash50]

FNH SPR-A1
Leupold Mark4, 6.5x20x50mm ER/T Mil-Dot Reticle

Thanks to the information I got here on "The Hide" I was able to add the Kydex cheek piece. She isn't much to look at but she shoots true.

 

[jpolansk]

After collecting the parts for the past few months, I am close to done (minus the finish).

Specs:
1980's Remington 700 ADL action
Remington factory 308 heavy fluted varmint barrel
AX AICS with 20MOA action and fore-end rails
Leupold Mk4 6.5-20x50 H58
Leupold Mk4 High rings
Flatline ops accu/level

 

[DavidT]

Just a GAP Crusader, Nightforce F1 Mil-Spec scope, and your other typical basics. My first venture into the modern bolt gun world.

 

[DavidT]

Just a GAP Crusader in .308, Nightforce F1 Mil-Spec, and typical other items. My first step into the modern bolt action guns.

 

[ctso030]

my 338 Norma

 

[168BTHPM]

I just picked this up from the gunsmith yesterday, it's chambered in .308. I bought every piece of it except the Remington SA receiver and billett PT&G bolt here on the Hide. The barrel is a Bartlien 5R M24 contour, McMillan A5, R&D bottom metal, McMann MIRS rail, Jewell trigger, Noveske KX-3 flash hider, Leupold LR/T 8.5-25X50mm, Badger rings, the PT&G bolt has an M-16 extractor and fluted firing pin. Jason at Jack Kiester Custom Rifles bedded it and did the camo Cerakote paint job, he painted the stock, barreled action and MIRS rail all separately, when the rifle is assembled the camp pattern lines up on all three pieces, the camo pattern is under the MIRS rail so it can be removed and the entire barreled action still has the camo. The PT&G bolt fit the action so tightly he couldn't cerakote the body, so he micro-slicked the bolt body and painted the handle and shroud. He didn't paint the mag or bipod because I forgot to take them to the shop.

I didn't have any other background to take the picture with because I still have a foot of snow everywhere.

 

[Pointman308]

Just a GAP Crusader in .308, Nightforce F1 Mil-Spec, and typical other items. My first step into the modern bolt action guns.

You definetly started in the right direction. I love the looks of a Crusader no matter how many times I've seen one. Wished I could afford one some day.

 

[sgtsmmiii]

I just picked this up from the gunsmith yesterday, it's chambered in .308. I bought every piece of it except the Remington SA receiver and billett PT&G bolt here on the Hide. The barrel is a Bartlien 5R M24 contour, McMillan A5, R&D bottom metal, McMann MIRS rail, Jewell trigger, Noveske KX-3 flash hider, Leupold LR/T 8.5-25X50mm, Badger rings, the PT&G bolt has an M-16 extractor and fluted firing pin. Jason at Jack Kiester Custom Rifles bedded it and did the camo Cerakote paint job, he painted the stock, barreled action and MIRS rail all separately, when the rifle is assembled the camp pattern lines up on all three pieces, the camo pattern is under the MIRS rail so it can be removed and the entire barreled action still has the camo. The PT&G bolt fit the action so tightly he couldn't cerakote the body, so he micro-slicked the bolt body and painted the handle and shroud. He didn't paint the mag or bipod because I forgot to take them to the shop.

I didn't have any other backgournd to take the picture with because I still have a foot of snow everywhere.

Very nicely done.

 

[Phezzik]

My humble entry.

Howa 1500 .300 WinMag
Krieger #10 MTU 1-10" cut at 26"
Mcmillan A5 with saddle cheek peiece, adj LOP spacers and flush cups
CDI DBM
EGW 20 MOA rail
Larue LT120 mount
Vortex Viper PST 6-24x50 MOA/MOA
Unknown stock pack
Kryloned od green and desert kahki

 

[GhengisAhn175]

My new aiax in 260 remington w/ bushnell 3.5x21 ers tremor2 reticle and a cnvd-t



Sent from my DROID RAZR using Tapatalk

 

[mariley85]

First foray into the world of the precision bolt.

FN SPR A2, 24", 1:12, .308
-bedded
-fluted
-threaded
-CDI DBM
AAC Brake
Badger knob
Badger 20moa base
Badger rings
Harris notch swivel
Triad pack.

Have yet to stretch her legs, but this coming weekend should allow for lots of 900-1100yd artillery fire.

 

[Thecelt]

Dont recall if i posted her up yet.