Thanx, sold some doubles and triples. Figure burn some barrels and stick to what I like.... Kmw/GAP, AI, and DTA
precision rifles... show em
- Thread starter redneckbmxer24
- Start date
Thinned down a lot, only thing really missing is a 223 Kmw gap build currently being finished up. A couple of em have multiple barrels and I have 2 uppers for the gap10. If I'm doin my part they are all pretty precise
is that a 2014 AX chassis? If so how'd you get one already?
The rifle looks much better in person / better camera.
308
Cerakoted and built by Jon Addis at area 419 Firearms
Remington 700 action
18” Bartlein barrel M24 contour threaded 1:10 twist
KRG Whiskey 3 Gen 4 Folding Chassis painted by shortbus
Timney 510 trigger
Nightforce 2.5-15X50 F1 with H58 reticle
ARC M10 rings
Larue LT706 Harris Bipod QD mount combo 9”-13”
Waiting on ATF approval for my Thunderbeast 30P-1 suppressor
Flat Dark Earth cerakote
308
Cerakoted and built by Jon Addis at area 419 Firearms
Remington 700 action
18” Bartlein barrel M24 contour threaded 1:10 twist
KRG Whiskey 3 Gen 4 Folding Chassis painted by shortbus
Timney 510 trigger
Nightforce 2.5-15X50 F1 with H58 reticle
ARC M10 rings
Larue LT706 Harris Bipod QD mount combo 9”-13”
Waiting on ATF approval for my Thunderbeast 30P-1 suppressor
Flat Dark Earth cerakote
Last edited:
308
Cerakoted and built by Jon Addis at area 419 Firearms
Remington 700 action
18” Bartlein barrel M24 contour threaded 1:10 twist
KRG Whiskey 3 Gen 4 Folding Chassis painted by shortbus
Timney 510 trigger
Nightforce 2.5-15X50 F1 with H58 reticle
ARC M10 rings
Larue LT706 Harris Bipod QD mount combo 9”-13”
Waiting on ATF approval for my Thunderbeast 30P-1 suppressor
Flat Dark Earth cerakote
Nice!
How do you like the H58 reticle? Used it yet?
Thinned down a lot, only thing really missing is a 223 Kmw gap build currently being finished up. A couple of em have multiple barrels and I have 2 uppers for the gap10. If I'm doin my part they are all pretty precise
I would scream "fuck you" but my jaw is still on the floor with drool pouring out.
Here is my wife with me State Arms Dicke Berta after she put a few rounds thru it..
Wow you should post a video of that rifle in action!
Here is a quick vid of my wife shooting the 50. She has trouble closing one eye so excuse the one handed shooting..LOL
Ash and the 50cal - YouTube
Ash and the 50cal - YouTube
AI AT - Factory threaded 20" barrel w/ TBAC 30BA
I run the same kit (all but the glass).... I'm hooked on the AI action kick. Did you get your .260 rem barrel yet from MH?
Nice set up.
p
I know what you mean, the AT is one of those guns that is going to get shot a lot and will never leave my collection. Yeah, the 260 barrel came in and I will put it through its paces later this week.
here's my addition, took a while to accumulate all the parts as this is a super rare long range build using only the best components. this is a bad mother fucker and I'm quite proud of it. Below is the target from when i got it out to zero, shot at 50 yards off of a backpack backpack. If thats not precision rifle than i dont know what is
+1
I like it a lot. Its the Gen2 with the MSR reticle. I have really enjoyed using it. Great ergos, positive clicks, perfect reticle, and great glass.
Here's one of mine a Blackops (formerly Skunk Works) Infidel
18" Bartlein Barrel 1:10 5r Threaded
Timney Trigger
AICS 2.0 Folder
Vortex 4-16x50 PST Mil/Mil in NF Ultralight Rings
Atlas Bipod
Shoots better than I can drive it. Just hoping someday I can make use of that threaded barrel by hanging a suppressor off the end
18" Bartlein Barrel 1:10 5r Threaded
Timney Trigger
AICS 2.0 Folder
Vortex 4-16x50 PST Mil/Mil in NF Ultralight Rings
Atlas Bipod
Shoots better than I can drive it. Just hoping someday I can make use of that threaded barrel by hanging a suppressor off the end
GAP Crusader in 6.5 Creedmoor.
Very Nice Rifle...I absolutely love everything about the Crusader. The colors fit well together and the rifle is porportioned perfectly. How much does it weigh as pictured? I have one on order in 6XC with a #6 GAP instead of the #7.
R700 AAC-SD .308, XLR Element Chassis, HDMR 3.5-21 w/H58 Reticle, JP 1 piece 34mm mount, Surefire SOCOM brake. Finish is Alumahyde Coyote & OD Green
View attachment 40981
View attachment 40981
Nice rifle. How are you looking the Element? I've got mine on my 700 5R Milspec, and I'm loving it.
Sent from my SM-N900V using Tapatalk
Thanks...loving mine as well. I am a big fan of Kyle's creations...I will def be a return customer when I start my .260 build...after I pay for my JP LRP-07. So, about 10 years from now...
Thanks. 16.6 lbm with bipod, stock pack, and sling. I was surprised by the weight and have been contemplating cutting it to 24". If I had known how huge the #7 GAP contour was, I surely would have had it fluted. Great gun, though.
View attachment 41001
I don't have a close-up of mine from the side but here is the brake without the finish I have from the surefire website..
I don't have a close-up of mine from the side but here is the brake without the finish I have from the surefire website..
Thinned down a lot, only thing really missing is a 223 Kmw gap build currently being finished up. A couple of em have multiple barrels and I have 2 uppers for the gap10. If I'm doin my part they are all pretty precise
...one of the most beautiful things I've seen.
26". The weight does help shooting but it isn't something I wouldn't want to walk to a tree stand with. Anything above ~14 gets dedicated to range only shooting.
