Precision Underground Suppressor Insulators. Lifetime warranty!
- Thread starter Precision Underground
- Start date
I’ll prob start them at the same price, $69. The material cost is a little less because there is no Kevlar lacing but they are a little more tedious to put together so I’d say they are equal to the laced version.
10 4 PM me your dimensions and I’ll start making some up. I’ve got a couple more that want them so I’ll get a list going. I should be able to have them ready and on the site in a few days.
I had a few people that want the velcro version asap so I put a preorder on the page. It says shipping 1/10 but I expect to be able to get them out sooner than that. I'd rather say 1/10 and ship before then and look good rather than saying 1/5 and miss that and look bad lol.
https://precisionundergroundriflegear.com/products/velcro-insulator/
https://precisionundergroundriflegear.com/products/velcro-insulator/
New pattern/color coming to the site soon. I think it is pretty bad ass! Check us out on FB and IG and take a look. We are also doing a giveaway of choice between a bag or cover on social media. Follow us on IG, like our facebook page and share the giveaway post at the top of the page. You will get one entry from FB and one from IG if you do both. There are not a lot of entries so your chances are pretty good!
https://www.instagram.com/precisionundergroundriflegear/
https://www.facebook.com/PrecisionUndergroundRifleGear/
https://www.instagram.com/precisionundergroundriflegear/
https://www.facebook.com/PrecisionUndergroundRifleGear/
New stock of materials comes in thurs. I have a stack to finish off when it gets here and I’ll be able to ship new orders by Fri.
Got the materials early! These will be headed out tomorrow. Yesterday’s orders will prob go out tomorrow as well. Did all of you guys call each other and plan to match your Coyote covers? 
Black, BK Multicam, and MARPAT Velcro covers are ready to ship. MARPAT is new and not on the site yet but just choose black and specify marpat in the order notes and I’ll get it. The other colors will be ready to ship as soon as new velcro comes in. Prob by Saturday. These things are slick and I expect them to really stay put with the cinched back-loop.
Here is what the MARPAT looks like.
Here is what the MARPAT looks like.
Velcro preorder is on the site. You can go ahead and order just specify what you want in the notes if it’s not listed on the order page. Make sure the cover can extend a bit behind the suppressor so the cord can tighten behind it. That’s what will keep the velcro version from sliding forward. If you have something like a Sig I can probably make the Kevlar loop tighten around the taper rather than behind the suppressor. Something with a locking collar and no taper may be better served by a lace up version.
Last edited:
Could you build one without exact measurements, I have an omega 300 in jail and would like to go ahead and order one if possible, I would assume all 300,s are the same dimensions?
I’m sure we can find someone to embroider anything for a price! I’ll ask my supplier if she Can or if she knows someone. I’m sure we can find someone.
Last edited:
Yessir I am about to put yours on the table. You did mean to get just the cover version and not the insulator version right? Just making sure before I start cutting! I had someone else buy the cover and wanted the insulator.
Guys I am starting to just make one wrap around the barrel with the Kevlar cord. If anyone is having trouble getting the cord to cinch good and tight after 2 wraps around the barrel try this. As the cord exits the last loop sewn in the webbing on the top of the cover, wrap the cord down under the barrel and then back up on top of the barrel and cinch right from there. I had put enough cord for another wrap down but after using it for a while I think cinching from the top with one wrap is easier to get good and tight. I’ve also added some rigid tips on the cord so it is easy to take the sliding clamp off and back on. I left plenty of extra cord on them so you could wrap in different ways if you wanted to. Once you get it how you want it you can trim the cord(it takes something really sharp to cut Kevlar cleanly). If you trim it add an end clamp or a dab of epoxy on the end of the cord to keep it from fraying. You could tie a ifht knot in the end as well. If you have some crimping pliers I can send you two cord tips to clamp on if you want, just let me know.
I’m trying to get out to make a quick video on how to easily install them. I’ll post here when I do. Y’all please let me know if you are having any trouble and we will get you sorted!
I’m trying to get out to make a quick video on how to easily install them. I’ll post here when I do. Y’all please let me know if you are having any trouble and we will get you sorted!
Thank you sir! I am trying to get a video up with some tips on installing them. Let me know if you have any trouble.
Installation videos are up on the site. Excuse the poor quality, I have got to get out and make some better ones. No time!
Installation Vids
Installation Vids
Nice! You can tie single knot between those cords. It makes it look a little better and makes it easier to grab them to pull tight. Make sure you have enough felt over the back of the can so the cordura doesn't touch when cinched tight. That looks like a lot of felt up front. Report back once you put it through it's paces!
Is that a leveling base you are using? I have been thinking about one. Do you find it has enough adjustment for most situations or do you have to adjust tripod legs a lot?
Yes, RRS leveling base and Fiesol tripod. I think it is plenty for 90% of shots. If needing more, you can set one leg closer to you and rough adjust angle up or down as needed. I drilled and epoxied T nuts in the Manners stock to allow removal of the Arca plate if needed.
Just PM me with your order # and the size and model. I think the notes section is tricky to find on the order page. Thanks for the order!!
Yea man that and a bag. Almost went multi cam but thought MARPAT looked good
MARPAT looks bad ass man. That and multicam are my favorite.
Order placed for Velcro model. No area to input suppressor model using Paypal checkout. PM sent with order # and suppressor info.
Got it thank you sir! Not sure why sometimes there is no place for notes and sometimes there is. PayPal problems! I’m getting set up to directly take CC soon so I can cut PayPal out. Also trying to figure out a way to manually add a notes section on the site itself but they don’t make it easy!
Happy to send one your way! I have had a ton of orders over the weekend but have been staying on them as they come in. I should be able to ship you out tomorrow if you get it in today. Thanks!
I make all of them to order. There are just too many shapes and sizes to keep anything in stock. I have made quite a few for TBAC 7s though. I can have it made up before tomorrow no prob.
All weekend orders went out today. Please let me know if you didn't get an order complete/shipping email. Check your spam and please mark as not spam if it's there. Dang spam filters are messing up my customer service game!
Similar threads
