If you’re putting these on either an ar or a bolt gun (assuming the 556/30 cal) do you need the spacer? Also would you run all Ti cups or the first one SS? Padom is the company running the Ti cups going to run Ti or lighter SS end caps that I could go ahead and order?
-
Having trouble using the site?
Contact support
Suppressors QuietBore 22LR Titanium Suppressor Build Review -***Approved Form 1 Required***
- Thread starter padom
- Start date
Yes you need the blast chamber (spacer). I have no idea about all Ti vs SS. End caps are a hang up right now do the poor thread machining of the QB tubes and spray/coating all over the threads. we are trying to work through that now. That was the plan but we will have to do further testing.
Well there has only been 3 orders for 45 kits... 1 Ti and 2 SS. Cant tool up and run for 3 orders. Let alone buy a bar of Ti for 1 kit. Ssoo, if you want these you better get your order in asap or those 3 orders will be refunded and none will be made.
I‘m still in for the 556/30 cal ones. Those haven’t been posted for sale yet have they?
-
I emailed them the other day and asked if they doing the lighter weight internals on the 223/308 Cal. ( https://brandywinesafety.com/contact-us/ ) . and was told ..
..." We have not brought up the D size internals on the website yet, but will be soon. They are in final testing now ".
.
I'd definitely be in for a .45 Ti kit if we could get a sound review on how it sounded on 9mm hosts compared to a 9mm kit. Also am interested in what the total weight would be when everything is drilled out. It would be awesome to run direct thread on my Berettas with the 2 extra baffles in place of the booster.
Well I dont have a 9mm kit so that wouldnt be possible. But I have a Rugged Obsidian 45 that I run on all my pistol calibers from 9mm up to 45 and this QB 45 kit sounds identical to my Rugged Obsidian 45 in numerous tests using 9mm 124gr, 147gr and 165gr subs out of a Glock 19 9mm. If that helps you any.
I had the same question and sent an email to quietbore; they responded nearly instantly.
"Dumb question.
I'll be drilling my 22 trap but didn't pay attention to the baffle direction inside. When I put it back together do the baffles go in with the flat side facing or away from the muzzle end?
Thanks"
Not a dumb question at all!
The flat side will go towards the firearm.
Thanks,
preston
I had gone back and looked at the technical drawing on their website and it showed the small end of cone towards the weapon. Its how I assembled the system and I am very happy with how it works.
Much appreciated, think I'll do the .45 kit and drill it for .40 since I don't own any .45s but do own .40s. Silencerco has an awesome comparison of shooting their Osprey .45, .40 and 9mm cans with a 9. The .40 had the quietest rating, around 124db i believe it was.
It took them forever to reply back to my mess up. They never engraved my tube. They sent me a replacement engraved after they finally replied back.
Awesome! Thanks for this. Appreciate your hard work on getting this setup. Cups Ordered woot!
I've always sent my form 1 stuff to Tar Heel State Firearms. Priority mail. Fast turnaround. Great people and great service.
I finally got my 22lr can drilled and put together, today. I tried it on a Bergara BXR and a MK4/45. It worked fine and sounded about the same as my neighbor's Sparrow, maybe a little quieter.
Thanks! For the info on Tar Heel State Firearms. I had this one done as part of the order at Quietbore. I was considering doing something different on a 9mm can and that's why I was wondering about engraving.
Thanks! For the info on Tar Heel State Firearms. I had this one done as part of the order at Quietbore. I was considering doing something different on a 9mm can and that's why I was wondering about engraving.
Thanks everyone for keeping all this feedback and discussion going. I have been reading for a while and want to pull the trigger (pun intended) on a .22 kit. I missed the CUPID deal - hoping for another big sale coming up soon - winter is almost over and time to gear up to be outside on the range a bunch more.
Use code "snipershide" for 25% off. Puts the Ti .22 kit with drill jig and engraving at $285 shipped, or the Al kit at $211 shipped.
Wasn’t sure about doing a form 1 but after reading the idiot proof method and everyone’s good experiences with QB I think my tax return this year will be in part going towards doing one of these
I finally got all the approvals for my form 1 .22 LR quietbore suppressor completed and the holes are drilled. Thanks to a bunch of folks on this site for all the advice along the way. I hope to give it a try this weekend.
Ok guys, here's the latest. We need 1 more SS order to run the SS cups and we need 1 more Ti order to run the Ti cups.
If you are on the fence, and want to shoot 9mm, 40 or 45 on a Form 1 and want a quality kit with quality components this is your chance. Get your orders placed.
If you are on the fence, and want to shoot 9mm, 40 or 45 on a Form 1 and want a quality kit with quality components this is your chance. Get your orders placed.
I'm trying to buy 10 SS cups and it is trying to charge me $300. It looks like the bulk pricing defaults to Ti, even when SS is selected.
I see what your talking about. Im talking to them now. Ill post back when its fixed
It's all fixed. To get the full kit discount click on the SS kit option which is for 8 cups, you'll then see an option to click on for 10 cups.
Got my trap yesterday! Ordered on the 17th, received it on the 28th. I'll probably get on the ball next week with the form 1 and patiently wait for the stamp.
Can’t wait on the 30 cal ti cups. My guns don’t like being loud. The 22 ti from QB has been awesome
Thanks
Buck
Thanks
Buck
Any update since Friday? I made an account after ordering a Ti set and then reading that I was the only one haha. Just want to keep an eye on the status to figure out whether I need to modify my QB order before it ships.
Yep. Just was told minimum order qty for both SS and Ti have been met
mhmm maybe I should do the same.
I finally got my .22 kit drilled out. Broke 3 bits. I think I kept side loading it somehow and broke them. Finally used a press and a 6 dollar fastenal bit and was able to drill out the remaining 4. Now for testing.
dang- I'm just now learning about this form1 stuff. This looks like a more cost effective and timely option @dbrister
Google ECCO recore, guy recores new and old cans that manufactures went out of business. You could buy a sleeve and have him core it for you. Eform 1 the sleeve. It would be a good option for like the heavy ass .30 cal quietbore solvent trap.
Would there be any advantage in going with a titanium tube for the Ti .45 baffles if I just plan on using pistol calibers and maybe the occasional .300 Bk subsonic loads? I contacted Brandywine and they stated they have no plans of producing one for their K's. I found another Ti tube that is slightly more than QB aluminum, but it has an ID of 1.150 I would have to get bored out 0.095. Would it be worth it, or would the aluminum QB tube fit my needs for a long time?
Yes, they are made third party
Well, submitted my order for .22 solvent trap and my form 1 on the same day. It's a race to see which I'll receive first.
Ordered my To .22 kit last Monday with engraving, just got shipping notification on it!
Wow. I ordered this afternoon and received 25% off. Must have been lucky and ordered right before they changed it.
yeah you did, looked yesterday and added everything to the cart. Got off work and went to buy it today because payday but now Im gonna wait and check back in a few days to see if it works again
Anyone have trouble threading their Quietbore onto a Kidd barrel? I can attach it to my Tikka but not the Kidd but I have a Q Erector that I can thread onto either rifle. On the Kidd, it just barely starts to thread and then abruptly stops as if it wants to cross thread.
I noticed this yesterday. I've used my QB on my Sig 1911-22 and my Ruger 22/45 with no issues, but the threads on my Kidd were definitely tighter. It went on, but I added a tiny drop of oil to the threads and had no issues.
My .45 can got approved today. With scanned and printed prints.
So you scanned in your fingerprint cards and printed them out and sent them in? Thats interesting
yes, our sheriffs office charges 5 bucks a card. Took them to work scanned them it, had to mess with it to make them a bit darker and getting the old card lines deleted off. Saved it as a template. It took me3 tries to get it aligned correctly and bam!
My .45 can got approved today. With scanned and printed prints.
What day did you put it in? I have one Im hoping for any day now.
