Remington 700 Police 338 Lapua rifles

[jagged77]

Re: Remington 700 Police 338 Lapua rifles

I had my smith open out a EGW HD base but looking at their webshop they offer the 8x40 direct as an extra. No recoil lug but I've every confidence it'll do the job.

 

[cruizer]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mtechgunman</div><div class="ubbcode-body">Pic of buildup:

</div></div>

reloader powder is fairly dirty

 

[Straight Shooter]

Re: Remington 700 Police 338 Lapua rifles

Reloader is the carbon king of all time but it shouldn't be this deep on the outside of your necks this deep in one shot. Your load is either under pressure or too slow of powder for the bullet weight. The case pressure is not high enough or long enough to keep it sealed while the bullet is still in the barrel.

 

[exhogflyer]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BLACK LION</div><div class="ubbcode-body">What about scope bases??
There does not seem to be much available with 8/40 screws.
Leupold only has thier Mark 4 series.
I am having a hard time forking over 150.00 on a damn base.
WTF??</div></div>

Nightforce makes the correct base with the correct screws for that rifle....have it on mine.

 

[cruizer]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Exhogflyer</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BLACK LION</div><div class="ubbcode-body">What about scope bases??
There does not seem to be much available with 8/40 screws.
Leupold only has thier Mark 4 series.
I am having a hard time forking over 150.00 on a damn base.
WTF??</div></div>

Nightforce makes the correct base with the correct screws for that rifle....have it on mine.

</div></div>
When I set my Remington 338 up I used 30MOA Badger base. cant remember who I gotit from but they were in Missouri I am pretty sure.

 

[ertlonggun]

Re: Remington 700 Police 338 Lapua rifles

got my badger base from Triad Tac. they had Badger modify it for the 8-40 screws. i got the 40 MOA base and my scope still zero's at 100.

 

[cruizer]

Re: Remington 700 Police 338 Lapua rifles

Triad sounds like were I got mine. wish I would have gone with the 40MOA base.I dont think I culd have cleared the objective with the barrel.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

Got my Badger base thru GAP. They had a good price on it and opened it up to 8-40 for free (and included the screws!). Can't beat that.

 

[aaronraby1]

Re: Remington 700 Police 338 Lapua rifles

has anyone had their stock 700p bedded? is it needed? should i do it? thanks.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: richieraby</div><div class="ubbcode-body">has anyone had their stock 700p bedded? is it needed? should i do it? thanks. </div></div>

I bedded mine after having the barrel set back, action trued, and heavier recoil lug installed. I machined out the recoil lug area of the HS stock so that the lug would be completely floated in epoxy. It has been shooting wonderfully, but it was shooting quite well before all the work. I had the barrel set back because the factory chamber had a defect in the machining and was ruining my brass (and then had all the other stuff done simply because I was having it torn apart anyways...)

 

[aaronraby1]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 71firebird400</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: richieraby</div><div class="ubbcode-body">has anyone had their stock 700p bedded? is it needed? should i do it? thanks. </div></div>

I bedded mine after having the barrel set back, action trued, and heavier recoil lug installed. I machined out the recoil lug area of the HS stock so that the lug would be completely floated in epoxy. It has been shooting wonderfully, but it was shooting quite well before all the work. I had the barrel set back because the factory chamber had a defect in the machining and was ruining my brass (and then had all the other stuff done simply because I was having it torn apart anyways...) </div></div>

mine is still completely stock! eventaully i will put a new stock. would you suggest having the action trued before i put the new stock on and then bed it? is yours with the factory barrel? also, what is the benefit of haveing a heavier recoil lug? thanks!

 

[cruizer]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: richieraby</div><div class="ubbcode-body">has anyone had their stock 700p bedded? is it needed? should i do it? thanks. </div></div>
I bedded my action and scope base. reamed to a 338 improved chamber.
I am loading 101.5gr of H-1000 and a 225gr bullet at 3120fps out of the factory barrel.
I am at 6050' elevation

100 yard groups are easy 1/2" groups

 

[Lafayette]

Re: Remington 700 Police 338 Lapua rifles

I wouldnt bed the HS stock - and would certainly true the action before bedding the HS and or upgrade to a complete chassis system.

Im still pretty shocked about the reports of horrible inaccuracy - seems strange to me. I absolutely love mine and it shoots very tight groups.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

Heavier recoil lug is just something you normally do when you true an action. No reason not to bed an HS stock; and I don't believe there's an upgrade going to a "complete chassis system". I've never had one of my rifles care if it's in a McMillan, HS, or B&C stock.....as long as it's bedded well they seem to all shoot well.

Don't worry about bedding yours; go shoot it. If it has issues, then you can start determining what you want to do to get it back on track.

 

[aaronraby1]

Re: Remington 700 Police 338 Lapua rifles

thanks for the input guys. im going to look into having the action trued. and a new break! im not a fan of dirt flying in my face!

 

[cjevanoff]

Re: Remington 700 Police 338 Lapua rifles

what should i look for on the barrel crown?

 

[2NSANE]

Re: Remington 700 Police 338 Lapua rifles

So, the questing remains, How many rounds will our gun fire before shot out? usiing factory ammo.

Also how were our barrels rifled? Cut, Button, or Hammer Forged?

 

[cjevanoff]

Re: Remington 700 Police 338 Lapua rifles

what shoud I look for on the crown of the rifle?

 

[customones]

Re: Remington 700 Police 338 Lapua rifles

how much meat is left after is has been opened up to lapua dimensions?

 

[g5]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cjevanoff</div><div class="ubbcode-body">what shoud I look for on the crown of the rifle? </div></div>

Look to see that it is smooth. One I saw looked like it was cut with a pipe reamer. With chatter.

 

[YetiSlayer]

Re: Remington 700 Police 338 Lapua rifles

Hey guys I am getting ready to buy my mount and rings for my 700P 338 and would like to know if the mount holes are for 8-40 screws or not. Believe mine was made in 2010.

Thanks Guys

 

[2NSANE]

Re: Remington 700 Police 338 Lapua rifles

8-40, make sure your base is a 8-40. and not for a standard Remington LA

 

[Lafayette]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 71firebird400</div><div class="ubbcode-body">Heavier recoil lug is just something you normally do when you true an action. No reason not to bed an HS stock; and I don't believe there's an upgrade going to a "complete chassis system". I've never had one of my rifles care if it's in a McMillan, HS, or B&C stock.....as long as it's bedded well they seem to all shoot well.

Don't worry about bedding yours; go shoot it. If it has issues, then you can start determining what you want to do to get it back on track. </div></div>

A chassis with a full length bedding block is an upgrade. KMW's sentinel, AICS/AX, XLR and Ashbury Saber are examples of such. I dont really see why bedding a 300 dollar stock makes sense unless you really like the stock. You can sell the stock, put the money you make + the cost of bedding towards a chassis system you can interchange easier in the future.

 

[robpiat]

Re: Remington 700 Police 338 Lapua rifles

Bedding is something you can and should learn how to do. It doesn't have to be complicated.

The popularity of chassis systems irritates me. Actually its the guys that put guns with POS factory barrels in chassis systems that bugs me the most. People think that somehow the bedding/stock/chassis is the critical piece when If they were to spend that money on a broughton/rock/krieger etc barrel it would be exponentially better even in a junk stock.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lafayette</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 71firebird400</div><div class="ubbcode-body">Heavier recoil lug is just something you normally do when you true an action. No reason not to bed an HS stock; and I don't believe there's an upgrade going to a "complete chassis system". I've never had one of my rifles care if it's in a McMillan, HS, or B&C stock.....as long as it's bedded well they seem to all shoot well.

Don't worry about bedding yours; go shoot it. If it has issues, then you can start determining what you want to do to get it back on track. </div></div>


A chassis with a full length bedding block is an upgrade. KMW's sentinel, AICS/AX, XLR and Ashbury Saber are examples of such. I dont really see why bedding a 300 dollar stock makes sense unless you really like the stock. You can sell the stock, put the money you make + the cost of bedding towards a chassis system you can interchange easier in the future. </div></div>

I've just never seen a performance difference between those stocks. I don't buy the marketing, and you'll never see anyoe offer quantifiable evidence.

Do you really believe that moving a barreled action from a bedded HS Precision stock into an AICS will make it shoot better? I 100% disagree based on my own experiences. Also, I don't understand your logic of "not bedding a $300 stock". Bedding a stock costs me about $15 worth of MarineTex and a couple hours of my time....why not do it?

 

[SAS_Sniper]

Re: Remington 700 Police 338 Lapua rifles

100 mt

300 mt

 

[blurry6]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: robpiat</div><div class="ubbcode-body">Bedding is something you can and should learn how to do. It doesn't have to be complicated.

The popularity of chassis systems irritates me. Actually its the guys that put guns with POS factory barrels in chassis systems that bugs me the most. People think that somehow the bedding/stock/chassis is the critical piece when If they were to spend that money on a broughton/rock/krieger etc barrel it would be exponentially better even in a junk stock.

</div></div>

Hey now! Take it easy!

I love my AICS chassis' - I have a SA & a LA. You're absolutely right in that a fancy chassis system serves little more than a new paint job in terms of improving accuracy - a well-fitted custom barrel has the most impact,... literally

However, I like to swap out actions and barrels (custom & factory) frequently and having a nice chassis system on hand makes it simple,... plus they looks COOL(!) and isn't that what matters?

Just kidding,... I just like the AICS chassis and I like the familiarity I have with it when shooting,... nothin' wrong with a fancy chassis,... as long as you realize you're only upgrading the ergonomics and handling/features to fit you the shooter,... for 'accuracy', you need to look elsewhere.

Ry

 

[robpiat]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: blurry6</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: robpiat</div><div class="ubbcode-body">Bedding is something you can and should learn how to do. It doesn't have to be complicated.

The popularity of chassis systems irritates me. Actually its the guys that put guns with POS factory barrels in chassis systems that bugs me the most. People think that somehow the bedding/stock/chassis is the critical piece when If they were to spend that money on a broughton/rock/krieger etc barrel it would be exponentially better even in a junk stock.

</div></div>

Hey now! Take it easy!

I love my AICS chassis' - I have a SA & a LA. You're absolutely right in that a fancy chassis system serves little more than a new paint job in terms of improving accuracy - a well-fitted custom barrel has the most impact,... literally

However, I like to swap out actions and barrels (custom & factory) frequently and having a nice chassis system on hand makes it simple,... plus they looks COOL(!) and isn't that what matters?

Just kidding,... I just like the AICS chassis and I like the familiarity I have with it when shooting,... nothin' wrong with a fancy chassis,... as long as you realize you're only upgrading the ergonomics and handling/features to fit you the shooter,... for 'accuracy', you need to look elsewhere.

Ry </div></div>

I am not saying that chassis are bad or even that they are not worth the money. People that put a $1500 scope and a $1000 chassis on a Remington LTR baffle me and there are alot of them out there.

 

[lovain1932]

Re: Remington 700 Police 338 Lapua rifles

I need to get my hands on one of these

 

[WldWldWest]

Re: Remington 700 Police 338 Lapua rifles

Mine shoot's well enough to just Impress the Hell outta me! No I havent shot 20 10shot group's to see what it will do But on several occasions It has put 5rd's in a 1/2" at 200yds with handloads. I did have mine bedded and had a Badger Brake installed and It shot about the same as before.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DougW</div><div class="ubbcode-body">Mine shoot's well enough to just Impress the Hell outta me! No I havent shot 20 10shot group's to see what it will do But on several occasions It has put 5rd's in a 1/2" at 200yds with handloads. I did have mine bedded and had a Badger Brake installed and It shot about the same as before. </div></div>

Hey Doug,

What bullet and powder are you running? I've experimented with the 300SMK's and had good success but just got my first box of 250 Scenars.

 

[WldWldWest]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 71firebird400</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DougW</div><div class="ubbcode-body">Mine shoot's well enough to just Impress the Hell outta me! No I havent shot 20 10shot group's to see what it will do But on several occasions It has put 5rd's in a 1/2" at 200yds with handloads. I did have mine bedded and had a Badger Brake installed and It shot about the same as before. </div></div>

Hey Doug,

What bullet and powder are you running? I've experimented with the 300SMK's and had good success but just got my first box of 250 Scenars. </div></div>

My most accurate load has been a max book load with 300gr SMK and IMR4350 with Lapua brass and CCI primers. I also had really good results with R22 and H-1000 But I didnt get the velosity I was after with the latter two.

I've had really good luck with some old Bell brass that I've had for year's and I cant tell a difference between it and the Lapua brass to be honest. So if ya see any laying around I would scarf it up!

I havent shot any High BC 250's yet since I really havent had the need too but I did play with some Hornady 250's for a hunting load and they shot suprising well out to 400yds.

Track down DaLawDog as he is getting some smoking results with the 250 scenars

Doug

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

Thanks Doug. I had good results with the 300SMK and a max book charge of Retumbo (in Lapua brass, Fed 215M primer). I was loading them about .020" off the lands.

I'll PM DaLawDawg and see what he suggests.

 

[blurry6]

Re: Remington 700 Police 338 Lapua rifles

can you give us your 'max charge'? We can infer the rest - start a couple grains down and work up.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

94.0 gr of Retumbo

 

[jaypartin]

Re: Remington 700 Police 338 Lapua rifles

 

[CUTRIGHT]

Re: Remington 700 Police 338 Lapua rifles

I have a distributor with 2 available last week will these rifles still bring $1550.00 new?
I might buy one to sell here if I can make it worth doing.

 

[71firebird400]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jay Cutright</div><div class="ubbcode-body">I have a distributor with 2 available last week will these rifles still bring $1550.00 new?
I might buy one to sell here if I can make it worth doing. </div></div>

Only need 99 more posts to be able to sell it on here. Might be able to get 1550, depends if you're in a hurry to sell it or not.

 

[CUTRIGHT]

Re: Remington 700 Police 338 Lapua rifles

Yeah I knew there was something about that when I signed up again.
I found these two rifles and bought one for me and left the other then got to thinking someone else might be looking for one.
They said they never had any of the $999.00 models. I've got $1400.00 in mine with freight.

 

[CUTRIGHT]

Re: Remington 700 Police 338 Lapua rifles

Now 97 more.

 

[phreakmode]

Re: Remington 700 Police 338 Lapua rifles

Shot some rounds at 1400yards 2 weeks back, had couple rounds left so I stretched it out to over 2k.

I estimated the distance at 2083 yards so that's what I dialed for, hit low on the first shot and correct for a follow up shot and hit. Based on hitting low, I am thining the actual distance was around 2150, will confirm that with gps next time i am out.

Camera was maxed at 48x, couldn't get in any closer with it...

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/ugpZ8JYrfL4"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/ugpZ8JYrfL4" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>

 

[vucelick]

Re: Remington 700 Police 338 Lapua rifles

any estimate on how effective that brake is, specifically compared to the stock brake?

 

[bigbuckbandit]

Re: Remington 700 Police 338 Lapua rifles

Anybody compared the 700p to the savage 110 ba?

 

[aaronraby1]

Re: Remington 700 Police 338 Lapua rifles

with the use of a torch for heat, the factory brake came off with ease and the finish was not damaged in any way! FTE inbound!

 

[tomahawk84]

Re: Remington 700 Police 338 Lapua rifles

Anyone know if there are any more of these available? and where i could get one?

 

[Sendero_Man]

Re: Remington 700 Police 338 Lapua rifles

gunbroker has them all the time...

couple on sale over at longrangehunting forum too

 

[SIE107]

Re: Remington 700 Police 338 Lapua rifles

There is one for sale over on 6mmBR as well

 

[Good]

Re: Remington 700 Police 338 Lapua rifles

Local shop has an MLR with US Optics base for sale...

 

[.sk.]

Re: Remington 700 Police 338 Lapua rifles

Not quite MLR, but looks like.))

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2419869&page=2

[img:center]http://

[/img]

[img:center]http://

[/img]

[img:center]http://

[/img]

 

[300sniper]

Re: Remington 700 Police 338 Lapua rifles

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: .sk.</div><div class="ubbcode-body">Not quite MLR, but looks like.))</div></div>

now you are just being an annoying troll. your alleged issue with an hs precision rifle has absolutely nothing to do with this thread.