Rimfire Rifle Photos Thread

[kheuertz]

Re: show some pics of your rimfire sticks!!

My Savage Mark II TR - added DIP bottom metal and one of their 25 MOA rails as well as a Harris bi-pod with Pod-Lok. Haven't done much else but shoot it. Mainly use the sub-sonic as can see it into the target and its fairly quiet.

JaxOps

 

[clayne_b]

Re: show some pics of your rimfire sticks!!

Lots of good looking rifles here! Mine has seen some changes since the last picture on here.

Best I have done with it at 100 yards.

 

[SystemStooge]

Re: show some pics of your rimfire sticks!!

This is my only RF but I had fun putting it together.

It is a later model Ruger 10/22 receiver but everything else is ....
Boyd Stock
Green Mountain Barrel
Jart 1.5# trigger group
Kidd Bolt

Thanks

SS

 

[MosesTheTank]

Re: show some pics of your rimfire sticks!!

11B,

Very nice stick. Just sent my brand new 455PT off to Hooper for a bolt knob and threading. About that camo pattern on your stock, did it come that way or did you have someone do it?

Thanks,
Max

 

[D_Lamz]

Re: show some pics of your rimfire sticks!!

CZ 455 Varmint with rare invisible barrel

 

[duotone]

Re: show some pics of your rimfire sticks!!

Remington 597 heavy barrel with 4-16 centerpoint scope and a bi-pod.

 

[fireman610]

Re: show some pics of your rimfire sticks!!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: D_Lamz</div><div class="ubbcode-body">CZ 455 Varmint with rare invisible barrel

</div></div>

AHHHH LOOK!!!! Its the Manti Teo Gun!!!!

 

[defcon]

Re: show some pics of your rimfire sticks!!

.22LR 1918 BAR using a Marlin 795

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/s8SrmZ98fHs"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/s8SrmZ98fHs" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>


_MG_5476 by defconskylude, on Flickr


_MG_5472 by defconskylude, on Flickr


_MG_5479 by defconskylude, on Flickr

 

[rcmigpilot]

Re: show some pics of your rimfire sticks!!

Ruger 10/22 receiver
Reworked bolt w/Kidd cocking handle, guide rod and spring
Kidd trigger parts in stock polymer housing
Green Mountain 20" S/S bull barrel
Archangel Deluxe Target stock
Hawke 6-24X44 Varmint scope
The groups were 5 shots each at 25 yds when I was fine tuning the scope with only about 50 rounds through the gun. Now it shoots close to these groups at 50 yards with CCI Green Tag.

 

[Sauce787]

Re: show some pics of your rimfire sticks!!

Just got to test out my newest stick. Picked up a used Browning T-bolt varmint/target in .22lr. Threw a Redfield 3x9 on it and broke in my new indoor range.

10 shot group at roughly 25 yards.

And this is my Winchester 320. I bought it unfired in new condition a year ago. Found an old weaver 2.5 to put on top to complete the vintage look.

 

[jkonzal]

Re: show some pics of your rimfire sticks!!

Good one Fireman610!!!!!!!

 

[russ10x]

Re: show some pics of your rimfire sticks!!

http://i.imgur.com/MqYmw.jpg[/img]]Savage MK II, w/boyds tacticool

 

[russ10x]

Re: show some pics of your rimfire sticks!!

http://i.imgur.com/206B5.jpg[/img]]Win. Mod 52 Eric Johnson rifle

 

[Doctorwho1138]

Re: show some pics of your rimfire sticks!!

CCCCanuck, nice looking stick!!!

 

[derrekmorehead]

Re: show some pics of your rimfire sticks!!

http://imageshack.us/a/img688/9200/riflepics.jpg
10/22T J-Bunting Machine bullpup stock. 1-1/4 groups on a good day. Not bad for what it is....

 

[setnes1]

Re: show some pics of your rimfire sticks!!

[img:center]

[/img]
My CZ 455 Varmint with a 22WMR barrel.

 

[MosesTheTank]

Re: show some pics of your rimfire sticks!!

Whatever in the world a "J-Bunting Machine bullpup" is with that sick paint scheme, and then the guy who made a BAR out of a Marlin 795, and scads of other projects... I don't know where in the world you guys get your game from but y'all seem to have truckloads of it. I've been browsing the Hide for a while now and the shaking of my head at what I see never seems to slow down.

The bar is high enough I'm getting a nosebleed. Awesome work guys.

 

[Brent_528]

Re: show some pics of your rimfire sticks!!

 

[TheUziButton]

Re: show some pics of your rimfire sticks!!

 

[mo1826]

HK SR9 w/TC upgrades and G3 22lr conversion kit.

Hey all! I am new to the forum but have been having a lot of fun looking at pics and reading stuff here for a while now. This is my HK SR9 with the tc upgrades and G3 22lr conversion kit. It is really REALLY fun. For my next 22 I've got a hankerin' for a 40x hb in a mcmillan a4 with the repeater conversion that seems to be coming along. I pretty much need to start from scratch with all of that though. I don't know why people think shooting 22's is cheap : )

 

[Hennig]

Not a pic, but a quick vid of the missus on the PWS Summit T3. Excuse my stupid voiceover.

http://www.youtube.com/watch?v=tnSXxDLfvoA

 

[JGorski]

Here's my Cooper LVT 22lr

Here's how it shoots, SP JAGD & Eley tenex. 100yds.

 

[joesph]

JGorski what scope is that on your cooper? Very nice rifle.

 

[JGorski]

JGorski what scope is that on your cooper? Very nice rifle.

4-16 Burris Signature.

 

[z28kid]

At 50 yards

At 125 yards

 

[Defuzer]

My homemade Marlin cheapo.

 

[JelloStorm]

Hey all! I am new to the forum but have been having a lot of fun looking at pics and reading stuff here for a while now. This is my HK SR9 with the tc upgrades and G3 22lr conversion kit. It is really REALLY fun. For my next 22 I've got a hankerin' for a 40x hb in a mcmillan a4 with the repeater conversion that seems to be coming along. I pretty much need to start from scratch with all of that though. I don't know why people think shooting 22's is cheap : )

SR-9 TC or a PTR with PSG-1 furniture?

 

[defcon]

My homemade Marlin cheapo.

ah you beat me to it. i was going to do that conversion. thats a WELL MB02 right?

you got any more pics and vids on it? im in the middle of a Barrett M99 conversion using a Savage MKII. should be done tonight.

 

[Tango2249]

Im not a big fan of tan so when it came time to put in my Yodave trigger kit I decided to paint it green. Right now as it stands these are the stats on my rifle:
CZ 455 PT with manners stock
Vortex Viper HS mil/mil 5-15x 44mm Tactical Rifle Scope
EWG 25MOA scope base
TPS 30mm TSR Picatinny-Style Aluminum Rings Matte Low
Vortex Bubble Level Anti-Cant Device
Butler Creek lens covers
Harris 3x9 LNSW bi-pod
Accushot 1st gen monopod
Tactical Intervention sling
Yodave kit set to 1lb
eventially I will change the trigger to a Timmany and get a Lijia barrel but Im kinda spent out right now
anyway here are the pics

cz455PTgrn (2) by usmcchet92_96, on Flickr


cz455PTgrn (3) by usmcchet92_96, on Flickr


cz455PTgrn (5) by usmcchet92_96, on Flickr


cz455PTgrn (6) by usmcchet92_96, on Flickr


cz455PTgrn (4) by usmcchet92_96, on Flickr


cz455PTgrn (1) by usmcchet92_96, on Flickr

What stock pad is that?

 

[defcon]

Finished up the Barrett M99 using a Savage MKII F. Range time is next for test fire


_MG_5605 by defconskylude, on Flickr


_MG_5606 by defconskylude, on Flickr


_MG_5600 by defconskylude, on Flickr


_MG_5603 by defconskylude, on Flickr


_MG_5598 by defconskylude, on Flickr

Range time. Aiming for the 200-300 yard targets
http://www.youtube.com/watch?v=C6nF0XMkLZs
http://www.youtube.com/watch?v=7vaV8Jf_2Lk

Group pic of my other .22LR full metal conversions.


_MG_5588 by defconskylude, on Flickr

 

[Defuzer]

ah you beat me to it. i was going to do that conversion. thats a WELL MB02 right?

you got any more pics and vids on it? im in the middle of a Barrett M99 conversion using a Savage MKII. should be done tonight.

beats me on what it is. I ordered the airsoft kit and started cutting it up. I will try and find some more pics of it / get some more up

what is the third one down in your string of projects. looks kinda like a EDM/chey-tac somethinganother.

 

[Defuzer]

 

[Defuzer]

using steel putty to secure / bed the original stock cut down into the airsoft. actually once tightened works great.


and no, I wouldn't do something like this on a weapon with recoil. or more recoil than a 22

 

[RicosRevenge]

...tacticality... oh yeah. I gotz it.

 

[defcon]

beats me on what it is. I ordered the airsoft kit and started cutting it up. I will try and find some more pics of it / get some more up

what is the third one down in your string of projects. looks kinda like a EDM/chey-tac somethinganother.

yea its an M200 Cheytac. its the heaviest out of all of them.

 

[defcon]

using steel putty to secure / bed the original stock cut down into the airsoft. actually once tightened works great.


and no, I wouldn't do something like this on a weapon with recoil. or more recoil than a 22

yea i use JB epoxy steel putty and it works wonders. also couple it with JB Kwik Weld and it saves a lot of time and holds up extremely well

 

[marctolate]

My CZ453 Varmint with new scope mounted

S&B PMII 4-16x42 P4LF DT 1/4MOA
TPS TSR-W X-low rings
Harris bipod with pod-lock
DIP scope rail
CPG Design trigger guard
Boyd's Tacticool
Waiting on new bolt handle with tactical bolt knob.

Now only try to get a Manners stock for it to the Netherlands!

 

[Doctorwho1138]

Hey all! I am new to the forum but have been having a lot of fun looking at pics and reading stuff here for a while now. This is my HK SR9 with the tc upgrades and G3 22lr conversion kit. It is really REALLY fun. For my next 22 I've got a hankerin' for a 40x hb in a mcmillan a4 with the repeater conversion that seems to be coming along. I pretty much need to start from scratch with all of that though. I don't know why people think shooting 22's is cheap : )

That's a cool PSG-1 clone. Did you build that yourself?

 

[mo1826]

While I'd like to think I built this I didn't really build anything. Once you have a barreled receiver, which is all welded together, the rest of it is just upgrading parts. Swapping the buttstock and trigger pack on the roller locked hk's is real simple. Patience and money is what it took to get it where it is.

Getting this put together started with the desire for a true to form PSG1 clone. I went through several 91's, ptrs, and collections of build parts to get to here. Ultimately though, I found that having a clone built with all the correct parts was not much less than paying 12 grand for a real one. So, I figured I can save up for the real one while I shoot 22's out of this and I get to put it into the a4 configuration with just a couple quick changes.

I would highly, HIGHLY, recommend the G3 22lr conversion kit to anyone who thinking they would want one.

SR9 and PTR91

PTR91 in A4 configuration

PTR91 with PSG1 parts and barrel shroud(just a threaded on tube that makes the barrel look longer while saving you a butt load of money)

 

[woogie_man]

Now that is just awesome!

 

[defcon]

thats pretty cool.

Latest Savage MKII F

_MG_5653 by defconskylude, on Flickr


_MG_5652 by defconskylude, on Flickr


_MG_5649 by defconskylude, on Flickr


_MG_5647 by defconskylude, on Flickr


_MG_5648 by defconskylude, on Flickr


_MG_5650 by defconskylude, on Flickr



_MG_5656 by defconskylude, on Flickr

 

[MPrimo]

My CZ 455 VPT ... First range trip will be this weekend!

 

[usmcchet9296]

What stock pad is that?

Honestly dont remember anymore

 

[coWSMasher]

nice sticks guys this is mine

 

[RUMrunner]

Ruger receiver, KIDD barrel, Boyds stock. still in the works. When I'm done there won't be a ruger part on it and i'll have a stock 10/22 to start all over on

 

[RUMrunner]

A lot of nice rigs, and some amazing creativity! It makes me jeaous!

 

[chopper duke]

New guy here. Here are a few of the ones I've had:

Anschutz Match 54 in 1411 stock

Vickers Empire (Falling Black Action) in custom Benchrest Stock

Anschutz Match 64 w/ Anschutz Olympic Sights

Custom 10/22 (KIDD 2-Stage trigger 8oz/8oz, Magnum Research Carbon Fiber Barrel. Hogue Overmold Stock) This things was LIGHT!

GSS 522 (I put the conversion kit on after this picture to convert it back to the original GSG-5)

Savage FVSR in Black

Savage FVSR in OD

Remington 597HB in OD

Remington 597 in Grey

ISSC MK22 (SCAR Clone)

 

[Nook]

 

[speedrrracer]

Some amazing collections here! I only have one rimfire rifle, but maybe it should count as two?

 

[SporterII]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kejones1</div><div class="ubbcode-body">I have been looking as you all can see, if u dont care lets see some pics of your rifles just to give me a better idea of what i am looking for. Not alot people around here are into this like I am. If u dont wont to showem I understand that to. </div></div>
This post and the following three show some of mine:

<span style="font-weight: bold"><span style="font-style: italic">Kimber Model 82C "Super Classic":</span></span>

Keith

I had two of these and miss them both. Nice to see them.