-
Having trouble using the site?
Contact support
Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
Man! I am definitely shooting low class compared to all these beauties! All good though 
I really like my little plinker and I think shooting a suppressed .22 is the most fun you can have with your clothes on. Just need to figure out how to get a wee bit more height out of the cheek riser as it's less cheek weld and more cheek kinda sorta touches...
CZ457 24" Varmint AT-One
Athlon Midas TAC 6-24x50
Vortex Precision rings (low)
YoDave trigger spring
Updated with a BScar 25MOA rail, DIP aluminum magwell.and magazine block.
Waiting on the BScar 2-stage trigger to drop!
I really like my little plinker and I think shooting a suppressed .22 is the most fun you can have with your clothes on. Just need to figure out how to get a wee bit more height out of the cheek riser as it's less cheek weld and more cheek kinda sorta touches...CZ457 24" Varmint AT-One
Athlon Midas TAC 6-24x50
Vortex Precision rings (low)
YoDave trigger spring
Updated with a BScar 25MOA rail, DIP aluminum magwell.and magazine block.
Waiting on the BScar 2-stage trigger to drop!
Last edited:
Trade in the high scope rail for a lower one. BSCAR's rails are half the height of an Area 419...
This is my glenfeild model 60 i got for free. Basically the paperwork said i paid 20 bucks for it but my gunshop threw it in free as a helper to get me to buy a model 70 i wanted. They know i like junk. It was just a badly 80 grit sanded stock and the upper action with no trigger or mag tube. All in i spent 100 bucks making it a rifle again. I gotta say that it shoots amazing. I like old rusty junk guns cause they help me practice hand polishing without the fear of destroying something valuable lol.
First post here. Figure this is as good a way to introduce myself as any.
My Anschutz 1807 (a year younger than I am) wearing a Vortex Strike Eagle 5-25x56 EBR7, DIP rail, Snyder Precision metal spacers, Harris BRM, and a Bill’s Bolt Knobs candy blue steel knob. This instantly became my favorite rifle to shoot - the first time I pulled that 5018 trigger ruined every other trigger for me.
Savage Mark II BRJ with a SWFA 16x42 mil-quad scope, DIP bottom metal/action screws, Apachee trigger upgrade, and Bill’s Bolt Knobs candy red steel knob. This was the rifle that started my first real steps into precision rimfire.
Have a few other decent rimfires, but nothing that gets taken out virtually every range trip.
My Anschutz 1807 (a year younger than I am) wearing a Vortex Strike Eagle 5-25x56 EBR7, DIP rail, Snyder Precision metal spacers, Harris BRM, and a Bill’s Bolt Knobs candy blue steel knob. This instantly became my favorite rifle to shoot - the first time I pulled that 5018 trigger ruined every other trigger for me.
Savage Mark II BRJ with a SWFA 16x42 mil-quad scope, DIP bottom metal/action screws, Apachee trigger upgrade, and Bill’s Bolt Knobs candy red steel knob. This was the rifle that started my first real steps into precision rimfire.
Have a few other decent rimfires, but nothing that gets taken out virtually every range trip.
To illustrate the statement I made about BSCAR scope rails being much lower than the Area 419 - this is my CZ457 VPT with a BSCAR 20MOA rail, TPS TSR low rings, and an Athlon Ares BTR 4.5-27x50 scope. I don't feel the need for an adjustable cheek piece or a pad to get decent cheek weld on the Manners PRS1T stock with this arrangement.
Attachments
Not the typical rifles being shown here, but they were fun projects. Both of my boys wanted their own custom rifles, I guess my obsession with modifying & customizing everything rubbed off on them a bit .
I wanted to start them off with something simple, that they could grow into. They both wanted “superhero” themed builds, so that’s the direction we went.
Ruger Receivers, kidd ultralight barrels, one lefty Raptor stock, one righty Raptor stock, volquartsen hammers in both, one has a Tandemkross trigger, other has a Rimfire technologies trigger.
The LOP is a bit long for my youngest, he’s 4 currently but growing like a weed. This summer should be fun, they are both asking about shooting more often. I need to get the ball rolling on a few more suppressors, tired of swapping my 1 .22 can back and forth.
. I wanted to start them off with something simple, that they could grow into. They both wanted “superhero” themed builds, so that’s the direction we went.
Ruger Receivers, kidd ultralight barrels, one lefty Raptor stock, one righty Raptor stock, volquartsen hammers in both, one has a Tandemkross trigger, other has a Rimfire technologies trigger.
The LOP is a bit long for my youngest, he’s 4 currently but growing like a weed. This summer should be fun, they are both asking about shooting more often. I need to get the ball rolling on a few more suppressors, tired of swapping my 1 .22 can back and forth.
Look forward to hearing about range day. I have the same scope, going to put it on top of my Vudoo V22 MPA (20" MTU) when I get it late June.
Edit add: I also have the same Warne rings, got the package deal from CameraLandNY ($1440) last week.
I was reading a thread about shooting in the wind the other day and it was blowing pretty good here, i took it out and had no problem hitting a 3 inch plate at 150 yds consistently. Plus the 18 rd capacity is awesome if i wasnt paying 130 bucks a brick right now.... for as old as it is and mistreated as it was it is way more accurate than i can be.
Just got this one together.
the action is the RimX
The barrel is a benchmark 3g 18in mtu from bison tactical
The stock is an old original surgeon McMillan A5
Older Jewel trigger
Kmw bottom metal I picked off the prize table at the Altus AI match
Vortex gen2 my first prs scope
Spuhr mount I bought with saved up $1 bills
Harris bipod with kmw pod loc
absolutely hammers
Attachments
How do you like the tract toric? I have one on the way I’m itching to get!
Trying to get it turnt! Makes my 50 yd target 37 yds 
RIM X action 30moa rail
GRAYBOE Ridgeback bedded Desert camo
TT DIAMOND set at 6oz.
HARRIS pod
SHILEN 24 3/4" 14 rachet med. Heavy Palma
VORTEX ST 5-25 56MM
PRO MONO block 1 PC. 34mm mount integrated level 20moa add in.
RIM X action 30moa rail
GRAYBOE Ridgeback bedded Desert camo
TT DIAMOND set at 6oz.
HARRIS pod
SHILEN 24 3/4" 14 rachet med. Heavy Palma
VORTEX ST 5-25 56MM
PRO MONO block 1 PC. 34mm mount integrated level 20moa add in.
Last edited:
Tikka T1X .22lr sitting in a KRG Bravo with a short piece of ARCA for tripod use. Athlon Midas Tac 4-16x44 up top on a MT 20MOA rail. Waiting on a bolt and muzzle brake from DIP to get rid of the cheap thread protector.
Cant wait for my Vudoo to show up. You guys are making me not happy to wait!!!
Anyone put one in a HS Precision PST012 (Same as Rem700 Police) stock? I got one spare and was going to throw my V22 in that when it rocks up until I decide on stock. Would love to see what it would look like.
Anyone put one in a HS Precision PST012 (Same as Rem700 Police) stock? I got one spare and was going to throw my V22 in that when it rocks up until I decide on stock. Would love to see what it would look like.
Tikka T1X and Bergara B14R 22lr
Bergara B14R was replaced with a Vudoo. I couldn’t be happier.
Vudoo 20” Bartline Kikuri BA w/ 30moa rail
Grayboe Ridgeback
TT Diamond SS
Sawtooth Rifles ARCA Rail
Burris RT25 in Warne Tactical Low Rings
Vudoo 20” Bartline Kikuri BA w/ 30moa rail
Grayboe Ridgeback
TT Diamond SS
Sawtooth Rifles ARCA Rail
Burris RT25 in Warne Tactical Low Rings
Here is another long one - 27 1/4"Trying to get it turnt! Makes my 50 yd target 37 yds
RIM X action 30moa rail
GRAYBOE Ridgeback bedded Desert camo
TT DIAMOND set at 6oz.
HARRIS pod
SHILEN 24 3/4" 14 rachet med. Heavy Palma
VORTEX ST 5-25 56MM
PRO MONO block 1 PC. 34mm mount integrated level 20moa add in.
Hows it shoot ? I'm working on one for pole vaulting when it gets here!
@Rimdenter You mean so long as i don't knock the target down with the barrel ? ;-)
My average 100m 5 shot group with it is 0.72 MOA and best are around 0.3 MOA.
My average 100m 5 shot group with it is 0.72 MOA and best are around 0.3 MOA.
dont really have enough experience to answer that - from my sample set of TWO the ES is better in the longer barrel.
I'm really digging that rifle!
Since I can only build 50 guns per year without having to submit to adding a 10% Federal Excise Tax to the price of everything, I always build no more than that. And .... I only build guns that I would want, myself. If no one buys this one, it won't bother me one bit. This one received about an extra 100 rounds of "function testing", simply because it was too much fun to stop. The foundation of this particular .22 LR pistol is a Tactical Solutions X-Ring VR receiver, anodized Black. A virtue I especially like about the TS receiver, besides the value for the price, is the fact you can easily move the charging handle to either side, as the shooter prefers. The 10" aluminum barrel with steel liner is from Beyer Barrels, everyone's favorite for this sort of application, threaded 1/2-28, with the Beyer muzzle brake installed. No shortcuts were taken with the trigger - It is a Kidd 2.5 LB single stage drop in unit with "sportman's" low profile magazine release. You won't find a more crisp break or faster reset in any .22 trigger by anyone, anywhere. The chassis is the Kidd Tactical, with Magpul K pistol grip and SBA3 pistol brace installed.
Bergara B14r, MPA chassis, vortex strike eagle in an F3R machine one price mount, atlas Bipod
Just got the Savage .17WSM B-Mag action back from the smith for muzzle threading and reassembled today.
Quick rezero of the scope prone in the orchard with no rear bag.
First shot at 120yds to commence the opening of my annual Raptor Feeding Program season.
Size 12 boot for perspective.
The Turkey Vultures, Red Tailed Hawks and Bald Eagles are going to love this rifle.
The action and magazines suck but with American Eagle 20g pills it hammers larger diggers squirrels. My Mach2 and HMR both work but too many make it back into their holes, the WSM is a light switch.
Quick rezero of the scope prone in the orchard with no rear bag.
First shot at 120yds to commence the opening of my annual Raptor Feeding Program season.
Size 12 boot for perspective.
The Turkey Vultures, Red Tailed Hawks and Bald Eagles are going to love this rifle.
The action and magazines suck but with American Eagle 20g pills it hammers larger diggers squirrels. My Mach2 and HMR both work but too many make it back into their holes, the WSM is a light switch.
