Rifle Scopes Riser for Scope Mount on a DPMS LR 10 .308 M2

[Marlin_444]

Anyone use one of these?

I have low TPS rings that need a boost up to clear the Fore Stock (Handle is removable)...

Only need about an 1/8th of an inch...

Aside from working itself loose, what other negatives would there be in using one to boost the scope???

Let me know, I want to get my scope mounted ASAP...

RATTA-TAT-TAT...

Ron

 

[Redmanss]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

That should work, but it might still leave your scope mounted too far back and you'll end up with your scope rings on top of the erector housing. This will be dependent on your scope and the necessary eye relief.

Take a look at something like the Badger Ordnance riser rail. It allows you to mount your rings a bit further forward on the rail.

 

[YN*Dotte]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

As mentioned above you can have problems with eye relief and scope mounting if you do not go with a mount geared for AR mounting. I suggest you look into the Nightforce Unimount, they are extremely well built, just pricey

http://www.cstactical.com/Nightforce/GUN-ACCESSORIES/Rings-Bases/Nightforce/Nightforce-Unimount.html

If that seems a little too expensive, American Defense makes some very nice mounts for a little less

http://swfa.com/American-Defense-Scope-Mounts-C3184.aspx

Good luck

 

[BCP]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

Well, if you want a riser pm me, I have a YHM that I used on mine for awhile. Otherwise my advice would be to sell your low rings and buy some highs or get a 1 piece mount like the burris pepr for 60-70$.

 

[Pat M]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

22Moa Badger rail $100 from Triad

 

[Triad]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

$87.95, but both Triad and Badger are out of stock right now:

http://www.triadtactical.com/Badger-AR-Riser-Rail-22MOA.html

 

[E. Bryant]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

I've used the YHM riser on a AR-15 without any complaints. It will get you a bit of height, and will also provide some forward mounting space over the handguards.

 

[cuffm4615]

Re: Riser for Scope Mount on a DPMS LR 10 .308 M2

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Pat M</div><div class="ubbcode-body">22Moa Badger rail $100 from Triad</div></div>

+1. I have these on mine and I'm totally pleased and would not hesitate to recommend them.