Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just installed a new trigger, and hit the range today shooting at 100 yards. That trigger is so clean, worth every penny.
I will say it was simple installations, took less 10 minutes.
![]()
![]()
![]()
![]()
Nice reportJust installed a new trigger, and hit the range today shooting at 100 yards. That trigger is so clean, worth every penny.
I will say it was simple installations, took less 10 minutes.
![]()
![]()
![]()
![]()
I'm on the fence - i put one in my 6.5 but am hesitant to drop that much on a trigger for the 22. This was to be a fun rifle, if I start dropping $$ into it I would have been better off with a CZ to begin with lol.
I have my RPRimfire set up to mimic my 6.5 RPR. Catalyst arms bolt knob and mag release button on a modified TSW extended mag release lever, MPA EVG and Timney trigger (2018 Beta version)Oh also, my bolt knob keeps loosening - trying to decide whether to stick with it or swap out for a nicer piece - what's everyone upgrading too these days? I've got an Anarchy Grenade on my 6.5 but really don't care for it - only reason I haven't replaced it is it's cerekoted to match the rifle![]()
I have my RPRimfire set up to mimic my 6.5 RPR. Catalyst arms bolt knob and mag release button on a modified TSW extended mag release lever, MPA EVG and Timney trigger (2018 Beta version)
I got mine off Ebay. I think it was called Pure-Precision. I used a bit of blue loctite and it has been solid.Oh also, my bolt knob keeps loosening - trying to decide whether to stick with it or swap out for a nicer piece - what's everyone upgrading too these days? I've got an Anarchy Grenade on my 6.5 but really don't care for it - only reason I haven't replaced it is it's cerekoted to match the rifle![]()
I really can't wait until someone makes a decent stock for this action... Fully extended, this is not an great stock.
OEM barrel or aftermarket?View attachment 7092023heres one 10 shot group. Have another next to it sub MOA but not quite this tight
Oem barrel. ThanksOEM barrel or aftermarket?
That is some good shooting
Has anyone tried the Lothar Walther drop in barrel for the Ruger?
I'm interested in the 22 LR. They also have barrels for the the 17HMR, 17HM2 and 22 mag. All are listed at $299. I got an email awhile ago saying the 22 LR was in stock and could ship in 48 hours. I'd much rather have a Lothar Walther SS barrel for $299 than the Lilja barrel for what...$400? I just wondered if anyone has one and what they thought of it. I'm still hesitant to spend money on it. I just found the Walther drop in barrel last night.
I'm interested in the 22 LR. They also have barrels for the the 17HMR, 17HM2 and 22 mag. All are listed at $299. I got an email awhile ago saying the 22 LR was in stock and could ship in 48 hours. I'd much rather have a Lothar Walther SS barrel for $299 than the Lilja barrel for what...$400? I just wondered if anyone has one and what they thought of it. I'm still hesitant to spend money on it. I just found the Walther drop in barrel last night.
I'm interested in the 22 LR. They also have barrels for the the 17HMR, 17HM2 and 22 mag. All are listed at $299. I got an email awhile ago saying the 22 LR was in stock and could ship in 48 hours. I'd much rather have a Lothar Walther SS barrel for $299 than the Lilja barrel for what...$400? I just wondered if anyone has one and what they thought of it. I'm still hesitant to spend money on it. I just found the Walther drop in barrel last night.
Just in case anyone else is having issues with first round or two acting as flyers (high, left, right, etc) I had the chance to work on my buddies rifle (and mine previously) and solved his issue.
The 15 round mags that come with the rifle fit about as well as a hotdog in a hallway. But I noticed that it's usually only the first 1-3 rounds (regardless of number of rounds loaded in mag) that have consistent flyers. That means it almost certainly has to do with orientation of the mag/feeding the first few rounds.
I did added enough foil tape to the back of the mag to add some tension when mag is fully locked in position and bingo! Flyers disappeared.
Also, I sanded/rounded the bottom of the bolt significantly so that the bolt doesn't leave marks on the round under the bolt. These two mods alone improved my friends rifle from 1.5" -2" at 100yds down to 1" or a hair over.
Hope this helps and I can post pics if anyone needs them.
Just in case anyone else is having issues with first round or two acting as flyers (high, left, right, etc) I had the chance to work on my buddies rifle (and mine previously) and solved his issue.
The 15 round mags that come with the rifle fit about as well as a hotdog in a hallway. But I noticed that it's usually only the first 1-3 rounds (regardless of number of rounds loaded in mag) that have consistent flyers. That means it almost certainly has to do with orientation of the mag/feeding the first few rounds.
I did added enough foil tape to the back of the mag to add some tension when mag is fully locked in position and bingo! Flyers disappeared.
Also, I sanded/rounded the bottom of the bolt significantly so that the bolt doesn't leave marks on the round under the bolt. These two mods alone improved my friends rifle from 1.5" -2" at 100yds down to 1" or a hair over.
Hope this helps and I can post pics if anyone needs them.
Exactly. I think the mag sits differently after running bolt a few times and it affects how the bullets get "marked/damaged" while being chambered. It seems they correct themselves and become consistent after 1st or 2nd shot.I would like to see the pics you have. Both of the foil on the mag and the bolt before and after sanding.
What is the thinking as to how the stock mag orients itself after 1-3 rounds?
Are you asking for experiences with one, or if one exists? They make one that’s compatible for the centerfire and rimfire both, but haven’t seen any reviews of it: https://www.jardinc.com/ruger-precisionThanks I'd appreciate anything you can show.
Have you ever heard anything regarding a JARD trigger for the Precision Rimfire?
I would like to see the pics you have. Both of the foil on the mag and the bolt before and after sanding.
What is the thinking as to how the stock mag orients itself after 1-3 rounds?
I saw this same item, and also saw it on e-bay.If you're looking for and Extended Magazine Release for your Ruger Precision Rimfire, try one of these;
View attachment 7096251
I've had one for a couple of months and it works great. Installation is a snap.
View attachment 7096252
View attachment 7096253
I got mine at my LGS. They're also available at Anarchy Outdoors
Tom
If you're looking for and Extended Magazine Release for your Ruger Precision Rimfire, try one of these;
View attachment 7096251
I've had one for a couple of months and it works great. Installation is a snap.
View attachment 7096252
View attachment 7096253
I got mine at my LGS. They're also available at Anarchy Outdoors
Tom
I was really hoping after buying a Rpr in 243 they would’ve came out with a 22lr in the same frame and bolt design.
Solid,heavy precision rifle
I am honestly starting to get a frustrated with my RPr. I have checked all of the screws, done the tape bedding job, cleaned up the trigger, shot with and without loading the bipod, and I consistently get weird random fliers. I can hold the rifle and drill the target right where I am aiming on one shot, the next shot will be a flyer but the scope doesn't move at all, next shot is back where I am aiming. I figured maybe it was me so I shot my 223 and get a sub half-moa group. Other than replacing the barrel or eventually the stock, can anyone think of what I should check next? I have tried Lapua, a couple of CCIs, and Eley for ammo. I am guessing that mine was part of the second batch and I have about 1-2k rounds down the barrel.
Its frustrating bc I can see the potential of the rifle but cant seem to find what the issue is that is causing the fliers.
@vaguru hit the nail on head:I am honestly starting to get a frustrated with my RPr. I have checked all of the screws, done the tape bedding job, cleaned up the trigger, shot with and without loading the bipod, and I consistently get weird random fliers. I can hold the rifle and drill the target right where I am aiming on one shot, the next shot will be a flyer but the scope doesn't move at all, next shot is back where I am aiming. I figured maybe it was me so I shot my 223 and get a sub half-moa group. Other than replacing the barrel or eventually the stock, can anyone think of what I should check next? I have tried Lapua, a couple of CCIs, and Eley for ammo. I am guessing that mine was part of the second batch and I have about 1-2k rounds down the barrel.
Its frustrating bc I can see the potential of the rifle but cant seem to find what the issue is that is causing the fliers.
Definitely would help identify if mag/bolt are issue but also have to be very consistent in how they are placed into chamber. I.e. slide in by hand completely (best way) vs setting nose partially in chamber then finished by bolt close (not so good).I would try a study load one shell at a time buy hand no mag and see if there's a difference in group/flyer