-
Having trouble using the site?
Contact support
RWS GUNSMITHING BUILDS AND CUSTOMER PICTURES Part 2
- Thread starter RWSGunsmithing
- Start date
Posted by KWE1982
RWS Base Custom Rifle
AICS 1.5 Chassis
Remington 700
Brux 26" - 1-8 Twist - M24 Contour
Thunderbeast 30BA Suppressor
Timney Trigger
Schmidt and Bender PMII 5-25x56mm - P4F
Sphur SP-4001
Load Info
Lapua - Virgin Brass - Neck Sized with .249 Bushing
Powder - Varget 24.3 grains
Bullet - 69 gr SMK - .010 off the lands
Primer - CCI 400
Velocity - 2950 ES - 8
100 yard group
RWS Base Custom Rifle
AICS 1.5 Chassis
Remington 700
Brux 26" - 1-8 Twist - M24 Contour
Thunderbeast 30BA Suppressor
Timney Trigger
Schmidt and Bender PMII 5-25x56mm - P4F
Sphur SP-4001
Load Info
Lapua - Virgin Brass - Neck Sized with .249 Bushing
Powder - Varget 24.3 grains
Bullet - 69 gr SMK - .010 off the lands
Primer - CCI 400
Velocity - 2950 ES - 8
100 yard group
Posted by A1equipment
Robert built this one for me.
Manners stock
Jewell trigger
Bat triple lug
Kreiger 26" mtu
Shoots sub 1/4 with factory ammo
Robert built this one for me.
Manners stock
Jewell trigger
Bat triple lug
Kreiger 26" mtu
Shoots sub 1/4 with factory ammo
Posted by Jmartin2076
Results from shooting last weekend with my 6.5 CM built by RWS. 3 shots on a small steel coyote at 530 yds. Rifle is always sub half MOA, something lined up for this group though.
Measured at 0.161 MOA, and no the one on the ear wasn't me
"
"
Results from shooting last weekend with my 6.5 CM built by RWS. 3 shots on a small steel coyote at 530 yds. Rifle is always sub half MOA, something lined up for this group though.
Measured at 0.161 MOA, and no the one on the ear wasn't me
"
Posted by Bradu
Here's a 223 AI Robert built for me a couple months ago. The thread protector is seamless but after shooting it a few rounds the oil on the threads started to seep out. I didn't notice it in the picture until I uploaded it.
Here's a 223 AI Robert built for me a couple months ago. The thread protector is seamless but after shooting it a few rounds the oil on the threads started to seep out. I didn't notice it in the picture until I uploaded it.
Robert spun up this barreled action for me. Like my previous build he did, this one shoots better than the monkey pulling the trigger. Great value, top notch work, super cool guy. I'm happy to have found him
Well Photo bucket has proved to be a piece of shit!! Robert nice to see you great work again.... Love the .375CT
Shot this 4 round group today with Robert's work.
2017-08-19_01-55-49 by Paul SD, on Flickr
Sent from my Nexus 6P using Tapatalk
2017-08-19_01-55-49 by Paul SD, on FlickrSent from my Nexus 6P using Tapatalk
Last edited:
Now THIS is a particularly attractive rifle ... not that I am biased or anything.
I am looking forward to seeing how she performs.
Just got this from a happy customer.
Hey Robert, just wanted to send ya pics and let you know that the rifle I had you do for my dad turned out amazing. He absolutely loves it and it’s a hammer like the rest of your builds!! Day after opener of rifle season he got a big 10 point Michigan white tail! My dad wanted make sure to tell you thank you. He adores the rifle
http://
http://
Hey Robert, just wanted to send ya pics and let you know that the rifle I had you do for my dad turned out amazing. He absolutely loves it and it’s a hammer like the rest of your builds!! Day after opener of rifle season he got a big 10 point Michigan white tail! My dad wanted make sure to tell you thank you. He adores the rifle
http://
http://
Holy Mother of God! Is that horse-drawn
Just got this email from another happy customer.
"Robert, got my rifle end of last week and it looked great. Had the chance to go shoot it for the first time today. The first two groups are attached. Both shot with Hornady 143 ELDX. No load development needed here.
Just wanted to say thanks for a beautiful job- workmanship was outstanding, and accuracy can't be beat."
And it's not even broke in yet.
http://
"Robert, got my rifle end of last week and it looked great. Had the chance to go shoot it for the first time today. The first two groups are attached. Both shot with Hornady 143 ELDX. No load development needed here.
Just wanted to say thanks for a beautiful job- workmanship was outstanding, and accuracy can't be beat."
And it's not even broke in yet.
http://
Wanted to say thanks again, dropped the 280 AI barreled action into a Mcmillan Edge stock and delivered it to my dad for his birthday. It brought tears to his eye's. He sent me this target pic today, it seems to like 140 Accubonds and 168 LR Accubonds!
Last edited:
Robert built this one Bighorn Zermatt SR3 right hand bolt left hand eject Dan Muller AMU barrel Manners GAT 22-250 REM.
My 1st time ever at a range in a 200 yd shot small p dog is 1/2'x 1" the 22-250 Rem is a Hammer Thanks Robert
