• Cold Bore Ritual Contest - Only a Few Hours Left To Enter!

    What’s your cold bore ritual, that one thing you always do before your first shot to set yourself up for success? Winner gets new limited edition Hide merch. Remember, subscribers have a better chance of winning!

    Join contest Subscribe

Rifle Scopes Scope for a 6lb Rifle

Just dropped one of these on a barrett fieldcraft. Seems like a great scope for a lightweight rifle. Glass is quite good and i like the reticle, but everything else about the scope is pretty bare bones, but thats what i wanted. Anything much heavier i would think would seriously upset the balance of a lightweight rifle
I just bought a fieldcraft and went with the Leupold VX-5HD 3-13x56 -- 22.3oz
 
Edit: Looks like the TT is a little expensive, back down to Mk5HD vs VUDU.

"Looks like the TT is a little expensive" Ya think :D I agree with you, the TT's are beyond most shooters' budgets, but they are amazing scopes.

Sounds like you need to try out the Mark 5 3.6-18x44, it is a great optic for your style rig and like ILya said, it could be that my copy of the Mark 5 was "worse" optically than others because of sample variation.
 
March 3-24x52
To fuel this fire too....
March 3-24x52
To fuel this fire too....
20180811_085905.jpg
 
I just pulled the trigger on the VX-6hd 4-24 w the impact 29 reticle. I’m putting that on a new 6.5 PRC light weight Build (carbon stock and savage pre fit proof carbon barrel). 23 oz and will primarily shoot at 24,20,16 power (SFP I know). I also have the LRHS in 4.5-18 (love the reticle) on a 28 nosler. I’m with everybody else on wishing they’d make the Vx-6 and v6 in FFP but I’m in the west and if I’m shooting at 4-10 power I’m probably close enough to not miss (1st vs 2nd FFP not as much of an issue) so I’m swapping out a couple scopes to 2nd FP due to weight. The vx-3 I have compared to the vx-6hd is nothing in glass quality. I’m slowly becoming a Leupold fan.
 
i-Cgcwckz-L.jpg


I notice some butt-pad er "improvements" on that fix on the left of center. The one with the blue high-lights.
:)

I wrap everything with McNett tape and insert a thin piece of sorbothane (0.25" or so) under the tape for s lightly softer feel and non-slip grip.

I will get the wider recoil pad when they make it, but for now this works quite well. Generally, the wrap makes a bigger difference on teh cheekrest than on the buttpad.

ILya

ILya
 
  • Like
Reactions: wigwamitus
I wrap everything with McNett tape and insert a thin piece of sorbothane (0.25" or so) under the tape for s lightly softer feel and non-slip grip.

I will get the wider recoil pad when they make it, but for now this works quite well. Generally, the wrap makes a bigger difference on teh cheekrest than on the buttpad.

ILya

ILya

Is the far left rifle a Mosin Nagant?
Were you sick of smooth actions and wanted something that felt like it were full of sand?