Rifle Scopes Scope mount options

[DerickHubert]

I recently picked up a Vortex Razor HD 4.5-27x56 but need help picking a mount. It will be going onto a KAC SR25. My question is: What 34mm mount will work correctly on a flat top rail allowing enough space for the objective lens size? I am also looking for QD and am a fan of Larue and ADM stuff.

 

[Stugots]

Consider a BoBro QD 34mm 1 piece mount. I have 4 Nightforce 3-15x56 Zerostops and 2 5.5-25x56 ATACH-R Zerostops mounted on my AR 10 patforms! couldn't be happier!

 

[phlegm]

Any mount that is higher than about 1.4" to the centerline will work. LaRue, Bobro, and GDI are the usual suspects. Spuhr has one, too, if you like fancy things: http://www.milehighshooting.com/spuhr-qdp-4016-34mm-cantilever-scope-mount-0-mil-0-moa/

 

[DerickHubert]

Thanks for the info. I'm a big fan of Bobro and ADM stuff but was told to ensure with the 56mm objective lense on a flat top rail would fit as it can be a hassle. I'll look into the Bobro mount. Cheers.

 

[L.R.Novice]

My razor has an OD of 2.56 which means you need a minimum of 1.28 to clear the rail. ADM has good drawings on their site so you can see the height over centerline with their various options.

 

[ironsight1000yard]

Same boat here. Need rings for my Razor gen 2 4.7-25 on my RPR 6.5. would seekins rings do the job? I think I need AR high based on the info from this thread?