Rifle Scopes Scope wrap for AMG

D

Dthomas3523

Account no longer active
Supporter
Commercial Supporter
Full Member
Minuteman
    • Jan 31, 2018
    10,768
    15,813
    South Texas
    #1
    So, I just got my new AMG and I'm aware how notorious they are for scratching easily. I'm not too much worried about it, but if I can protect t a little, might as well.

    What kinds of scope wraps or other means of protecting it would you recommend?

    Thanks
     
    #2
    I wrapped mine in paracord six months ago. No problems so far.
     

    Attachments

    • 70CBA43F-BE95-4EAB-81A8-A52A4A7CE65E.jpeg
      70CBA43F-BE95-4EAB-81A8-A52A4A7CE65E.jpeg
      773.3 KB · Views: 900
    • Like
    Reactions: winniedonkey and Dthomas3523
    #8
    There is a company online, Gunskins I think. A vinyl sticker type I think that you heat shrink on. Haven't tried them but I have been tempted to on my AMG. Definitely not a quick removal product though.
     
    #10
    I felt the need to post on this thread. Mainly because I think there may be a misconception about scratching. The AMG uses a anodized type 3 hard coat finish. We are using the same finish prescribed by MIL-A-8625F for Type III, class II hardcoat finish. With this type of finish it can be semi-easily marked up, but at the same time it can also easily be cleaned off.......similar to an AR receiver. For example: You can leave a mark on the scope by running your finger nail down it. However, you can then wipe that mark off. So, would that be considered a scratch?

    I guess my question is- Are you guys seeing scopes that easily "scratch" or scopes that mark up ,but can be wiped off?


    OP, your certainly can wrap your scope, but I dont think your scope is going to scratch easily. The AMG's have a good bit harder finish on them than any of our other scopes and we dont have any problems that I know of with any of them scratching easily.

    Please feel free to hit me up if you have any questions.


    Scott
     
    • Like
    Reactions: ronon, Geno C. and Covertnoob5
    #11
    Scott,

    Thanks very much for your reply.

    It could very well be surface "scratches" that I see a lot on AMGs I have handled. I'll be running mine quite hard, so I'll get some feedback to you guys on that within the next few months.

    This is purely a subjective observation from handling and talking to many people with the Gen II vs the AMG. The consensus seems to be the finish is more durable on the Gen II vs the AMG.

    Is here any difference in the finish between the two?


    It could also be as simple as color. Surface marks probably just show up better against black than they do against the bronze Gen II.

    Again, thanks for the response and I didn't mean it as a slight to Vortex. I love the products.
     
    #12
    goinghunting said:
    There is a company online, Gunskins I think. A vinyl sticker type I think that you heat shrink on. Haven't tried them but I have been tempted to on my AMG. Definitely not a quick removal product though.
    Click to expand...
    viking78 said:
    That gunskins would quite cool stuff.
    https://www.gunskins.com/products/scope-skin
    Click to expand...
    I have GunSkins on a shotgun of mine, and my buddy has used them on a number of rifles and scopes. They're not difficult to install, though some things are obviously more tedious than others (think things with lots of little holes, like Keymod rails, or with weird shapes), and not difficult to take off either with no residue that I could tell. Just need a heat gun or similar instrument for both installation and removal. If you take your time, and I recommend watching their installation videos online, the end result is pretty nice and I'd think meaningfully more protective than Cerakote or a similar product.

    I will say that my buddy told me by far the biggest pain in the ass installation, however, was his Gen II Razor 4.5-27x. Nothing specific to that scope, but the tapering sections, the details on the turrets, working around the rings, etc. apparently took more time than some entire rifles. I'd expect that to be the same on an AMG or any other scope.
     
    • Like
    Reactions: BatteryArms
    #13
    The scope can take way more punishment than you think. Its like people who buy a car a freak out when it gets a scratch. Get over it.

    Your shit looks way cooler dinged up and covered in dust then as a wall hanger anyway. Use the gear, its what it was designed for.
     
    • Like
    Reactions: Dthomas3523
    #14
    Dthomas3523 said:
    So, I just got my new AMG and I'm aware how notorious they are for scratching easily. I'm not too much worried about it, but if I can protect t a little, might as well.

    What kinds of scope wraps or other means of protecting it would you recommend?

    Thanks
    Click to expand...

    Where did you hear or see that the AMG's scratch easy? I will buying an AMG soon.

    To help answer your question about wraps I've used wraps called Rem Wrap on anything I needed camo'd over. I used it on Tripods, GoPro camera housings outdoors and no issues so far.
     
    #15
    Several posts on here, a couple reviews online, and in PMs when I was purchasing an AMG.

    http://www.snipershide.com/shooting/threads/vortex-amg-anodized-finish.6877001/

    That's the one I could find off the top of my head. It was mentioned briefly in a couple reviews online.


    To clarify, I wasn't making a post dinging the optic. It is flawless so far for me. I'll be running tall target and box tests this weekend to verify tracking and such. But its my favorite optic so far and I've owned ATACRs and PM II's. Obviously its a subjective opinion, as they are all great scopes. The AMG just met my needs better overall.
     
    #16
    [QUOTE="
    To clarify, I wasn't making a post dinging the optic. It is flawless so far for me. I'll be running tall target and box tests this weekend to verify tracking and such. But its my favorite optic so far and I've owned ATACRs and PM II's. Obviously its a subjective opinion, as they are all great scopes. The AMG just met my needs better overall.[/QUOTE]

    No worries. I'm already getting one no matter what. I wanted to save some weight for my hunting rifle by staying with a 30mm tube. Thanks for the link.
     
    #17
    As the vortex rep indicated, these scopes do not scratch easily. They do, however mark easily (like fingernails for example). These scopes are hard anodized like all other aluminum tubes on the market, which is a hardening process.
    The marks wipe right off.. really not an issue. Seems like this is one of those internet rumors that won't die.
     
    • Like
    Reactions: Basher
    #18
    Dthomas3523 said:
    Scott,

    Thanks very much for your reply.

    It could very well be surface "scratches" that I see a lot on AMGs I have handled. I'll be running mine quite hard, so I'll get some feedback to you guys on that within the next few months.

    This is purely a subjective observation from handling and talking to many people with the Gen II vs the AMG. The consensus seems to be the finish is more durable on the Gen II vs the AMG.

    Is here any difference in the finish between the two?


    It could also be as simple as color. Surface marks probably just show up better against black than they do against the bronze Gen II.

    Again, thanks for the response and I didn't mean it as a slight to Vortex. I love the products.
    Click to expand...

    DThomas,

    That is a very interesting info. In all actuality the AMG has the hardest finish of any in our line. Most scopes on the market are type 2 hardcoat . This is true for the Gen 2 razor. As we mentioned earlier in the thread the AMG is mil spec Type 3 hardcoat.

    Fell free to contact me anytime if you have any questions. I'd be happy to elaborate.

    All the best
    Scott Parks
     
    • Like
    Reactions: ronon and Dthomas3523
    #19
    Awesome.

    It’s just humans being humans then. We think something looks like this and then numbers/stats are pulled and it’s not the case.

    I’m going to go with my theory of the “chalkboard” scratches just showing up better against the black than against the bronze.

    Either way, love my amg.

    Also, damnit.......make a super short amg 3-18, before I buy something else for my gas gun!!!!
     
    • Like
    Reactions: Basher
    #20
    I have a few bonefide scratches on my Gen II Razors, but they are both far from safe queens. That being said, they (the scratches) are not very deep; the coating is pretty tough.
     
    • Like
    Reactions: Dthomas3523
    #21
    Scott_at_Vortex said:
    DThomas,

    .... Most scopes on the market are type 2 hardcoat . This is true for the Gen 2 razor. As we mentioned earlier in the thread the AMG is mil spec Type 3 hardcoat.
    Click to expand...

    I'm sure you've never heard this one before :D but a large run in black mil spec Type 3 on the 4.5-27x Gen 2 razors would be all the rage.
    That limited run to EuroOptic did not appease the masses.
     
    • Like
    Reactions: Dthomas3523
    #28
    Dthomas3523 said:
    So, I just got my new AMG and I'm aware how notorious they are for scratching easily. I'm not too much worried about it, but if I can protect t a little, might as well.

    What kinds of scope wraps or other means of protecting it would you recommend?

    Thanks
    Click to expand...
    my cheap alternative is to use Band-Aid or Ace brand bandage like for when you wrap a sprained wrist or ankle. It comes in a 2-inch width about 2 yards long. I've bought it in either tan (or white for winter/snow camo); available at my local grocery store. Some brands have an elastic backing that helps it stay in place.
     
    You must log in or register to reply here.

    Similar threads

    hcsd54
    Optics SPF - Nightforce MOA Scope
    Replies
    1
    Views
    273
    hcsd54
    hcsd54
    Nicholi2789
    Optics Vortex Strike Eagle 5-25x56mm MOA-EBR7C
    Replies
    0
    Views
    342
    Nicholi2789
    Nicholi2789
    E
    Spotting Scope or Binoculars (and tripod)
    Replies
    7
    Views
    554
    Conqueror
    C
    S
    Optics Vortex MOA scopes. AMG, Razor Gen 2, PST
    Replies
    15
    Views
    992
    ryleecarr2006
    R
    762 ULTRAMAGA
    Mounting a short scope on Bat Vesper action
    Replies
    1
    Views
    123
    762 ULTRAMAGA
    762 ULTRAMAGA
    Top Bottom
    Back
    Home
    Forums
    Merch
    Alerts