Re: Seekins slim rail?
They will be available only thru spikes. Here are some pictures for you
We have the prototypes complete and Tom has a couple. Everything looks good and we should be good to go! The mount up is rock solid just like my proto i built before we ordered the extrusion
To install:
Install barrel nut to specified torque. If piston system is to be used shim barrel nut to align for piston clearance.
Tighten middle set screw. This will spread the internal clamp out just a tiny bit and give more clearance
slide the SAR over the barrel nut until it touches the upper and anti rotation tabs are engaged.
loosen middle set screw
Tighten the 2 side Torx screws to specified torque spec (will specify on instructions)
Tighten middle set screw (this will act as a binder for the torx screws
12 foot bars of SAR goodies
Mounting area.
Titanium Barrel nut.
Anti Rotation and weld quality
Looking from the muzzle end
Side View on rifle
Anything else you guy want to see just ask. I figured out the picture thing