Member Link Up SHWW Group

[TEAMSENDIT]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Market Garden</div><div class="ubbcode-body">How about a suppressed 223/308/anything you can feed from an AR15 lower match?</div></div>

we could do that but you will be pissed when you burn up the barrel. targets will be big enough 223/308 will have NO issues!!! it will be more about speed than pure accuracy. think 45%ipsc at 200yds and 66% at 400, 100%ipsc if farther than 400yds. probably round count around 100-150ish.

 

[*Nine]

Re: SHWW Group

Hell, barrels are meant to be toasted. As long as that 100-150 rounds is spread over a few stages I'd run it.

 

[TEAMSENDIT]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Market Garden</div><div class="ubbcode-body">Hell, barrels are meant to be toasted. As long as that 100-150 rounds is spread over a few stages I'd run it.</div></div>

might let it open up but only if not enough 308 223 shooters, there will be almost zero advantage for better ballistics in this case. in fact might be worth it to allow magnums just so i can see the barrels glowing red at the end of a stage.

 

[mac37]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">don't be a pussy john bring one of your ar's with a can on it!! if we can't get to 20 or so with 308/223 only i will change it but i think thats doubtful.
</div></div>

I'll just have to whip out my 10.5"......... SBR.

 

[jasonk]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mac37</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">don't be a pussy john bring one of your ar's with a can on it!! if we can't get to 20 or so with 308/223 only i will change it but i think thats doubtful.
</div></div>

I'll just have to whip out my 10.5"......... SBR. </div></div>

That would be bad news for you in Washington!!

 

[ranger1183]

Re: SHWW Group

Hey Guys, if you're looking for an awesome 22LR training rifle, this time sensitive post is something you should seriously look at.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ranger1183</div><div class="ubbcode-body">Seriously Guys, this rifle is about to sell for less than $400 on Gunbroker. If I had the coin, I'd pay at least $600 to buy it myself. But times being what they are, I can't afford to. Someone should really jump on this and not let it slip away! </div></div>

 

[Tribe]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TeamSendIt!!!</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Market Garden</div><div class="ubbcode-body">How about a suppressed 223/308/anything you can feed from an AR15 lower match?</div></div>

we could do that but you will be pissed when you burn up the barrel. targets will be big enough 223/308 will have NO issues!!! it will be more about speed than pure accuracy. think 45%ipsc at 200yds and 66% at 400, 100%ipsc if farther than 400yds. probably round count around 100-150ish.</div></div>

THIS sounds kick ass! ......... Gooooooooooo Diggler!

 

[mac37]

Re: SHWW Group

That's right I forgot no SBR's in Washington.

 

[Unknown]

Re: SHWW Group

Dibbs,
What did you do with the hide from the Bobcat? It would make a beautiful Sporran for use with a kilt.

For those who don't know, the only sporran (pouch worn in the front of a kilt, like a pocket) that is traditionally acceptable for both day, evening, formal, or informal is the animal face sporran. That is a sporran with the animal's face on it...

 

[ranger1183]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Unknown</div><div class="ubbcode-body">Dibbs,
What did you do with the hide from the Bobcat? It would make a beautiful Sporran for use with a kilt.

For those who don't know, the only sporran (pouch worn in the front of a kilt, like a pocket) that is traditionally acceptable for both day, evening, formal, or informal is the animal face sporran. That is a sporran with the animal's face on it... </div></div>
who does that sort of work? Making the sporran from the animal's hide?

 

[Rover31]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TeamSendIt!!!</div><div class="ubbcode-body">Not sure if this motivates/interests anyone but i was thinking of having a 308/223 suppressed only match sometime in the future.

I am well aware this will limit the shooters but i would really like to have a match with no earplugs all day it would just be killer!!

Would this motivate anyone else to get a can? is this something i could get 20 guys for? </div></div>

I'm in!

 

[akmike]

Re: SHWW Group

Since I don't anticipate getting a suppressor anytime in the near future I'll come and help out! Will need to get some heckling lessons from Scott

 

[-Nick-]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TeamSendIt!!!</div><div class="ubbcode-body">Not sure if this motivates/interests anyone but i was thinking of having a 308/223 suppressed only match sometime in the future.

I am well aware this will limit the shooters but i would really like to have a match with no earplugs all day it would just be killer!!

Would this motivate anyone else to get a can? is this something i could get 20 guys for? </div></div>

If M3 would get my can here so I could get the ball rolling then I'll be down when the ATF get's done with it's now 8 month timeline... lol

 

[HellsCanyonArmory]

Re: SHWW Group

Well crap, looks like I'm getting shoulder surgery for partially torn rotator cuff april 17th... Looks like I'll be coming and doing a lot of RO work instead of shooting for a month or two after that and my business is going to get pushed back a few weeks! Looking at first week in May most likely... :-/

Mike

 

[Mayday]

Re: SHWW Group

If any of you guys are wanting a suppressor, Travis @ Rbros is putting in an order for Thunder Beast. The more people in on the order the better, just a heads up.

 

[ST42]

Re: SHWW Group

Hey guys,
I'm just switched over to F1's. I have this one available,

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3154935&#Post3154935

SHWW discount to you all. PM for the price.

Thanks,
STS

 

[Sportin Wood]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TeamSendIt!!!</div><div class="ubbcode-body">Not sure if this motivates/interests anyone but i was thinking of having a 308/223 suppressed only match sometime in the future.

I am well aware this will limit the shooters but i would really like to have a match with no earplugs all day it would just be killer!!

Would this motivate anyone else to get a can? is this something i could get 20 guys for? </div></div>

How about a 6.5 CM with a .30cal suppressor??

 

[TEAMSENDIT]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: StanwoodSpartan</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TeamSendIt!!!</div><div class="ubbcode-body">Not sure if this motivates/interests anyone but i was thinking of having a 308/223 suppressed only match sometime in the future.

I am well aware this will limit the shooters but i would really like to have a match with no earplugs all day it would just be killer!!

Would this motivate anyone else to get a can? is this something i could get 20 guys for? </div></div>

How about a 6.5 CM with a .30cal suppressor??

</div></div>

i will probably allow it but cof will fry your barrel think 150rds in 4-6 stages with tight time limits.

 

[Jim the Plumber]

Re: SHWW Group

Well helll Scott. Can I run my 5.56 rifle? Stick with YOUR plan Scott. It will fill up. For you guys that want him to change the format to fit you. Back off.

 

[Alan_H]

Re: SHWW Group

who seriously does not have an AR in 5.56? Pat you dont count

 

[Muttt]

Re: SHWW Group

Well,

I'm finally moved completely into my new place. Now I just gotta unpack everything. Finally got some wood so I can build my new reloading bench. Which is a must since I don't have any ammo and need to reload some so I can go shoot .... LOL. Plus, I still need to rezero my scope since I put on the shorter rings.

I HATE moving.

The good thing is, I am closer to the range. So Broker, you want to try and meet up at the Poulsbo Range maybe this weekend and punch some holes??

 

[-Nick-]

Re: SHWW Group

This weekend is a little rough for me. I'm probably going to be out Saturday doing something with the wife for her Birthday and Sunday I'll have to spend playing catch-up on the work form Saturday. Friday would be easier. I might be able to do Sunday, but it all depends on what comes up Saturday while I'm MIA...

Where did you move to BTW?

 

[Sportin Wood]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">who seriously does not have an AR in 5.56? Pat you dont count

</div></div>

Me..... I HATE anyhting AR.... TWANG TWANG TWANG

 

[Alan_H]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: StanwoodSpartan</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">who seriously does not have an AR in 5.56? Pat you dont count

</div></div>

Me..... I HATE anyhting AR.... TWANG TWANG TWANG </div></div>

ok who doesnt have SOMETHING chambered in .223 or .308?

 

[Sportin Wood]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">ok who doesnt have SOMETHING chambered in .223 or .308? </div></div>

I guess I can pull out the wife's Gpa's old win model 100 in 308...

 

[JLR]

Re: SHWW Group

Here's the list of folks signed up for the NCWGC March Monthly Match:

Jason A
Ryan M
Jake V
James T
Chad M
Alan H
Mark W
Monte M
Matt K
Pearl B
Kevin O
Hany V
John M
Adam B
Scott M
Tim T
Mark B
Matt M
Garrett W
Mike S
Rory R
Jesse

If you're not on there, you aren't guaranteed a spot. Remember, NCWGC membership ($65) IS required to shoot these matches. Shooting starts at 10am, signup starts at 8am. Email me at [email protected] if you have any questions.

<span style="font-weight: bold"><span style="color: #FF0000">PROOF OF NCWGC MEMBERSHIP IS REQUIRED TO SHOOT THESE MATCHES. YOU WILL BE REQUIRED TO SHOW YOUR MEMBERSHIP CARD AT SIGNUP OR WILL BE CHARGED THE $65 FEE INSTEAD OF THE $20 MEMBER FEE.</span></span>

 

[1911fan]

Re: SHWW Group

Me.


1911fan

 

[Wireman]

Re: SHWW Group

You can add me and Jesse. We'll be doing some finishing work on the mover on saturday as well.

Rory

 

[JLR]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wireman</div><div class="ubbcode-body">You can add me and Jesse. We'll be doing some finishing work on the mover on saturday as well.

Rory

</div></div>

OK, you guys are in...don't forget you'll have to be members to shoot if you're not already.

 

[The Paw]

Re: SHWW Group

Dibbs or can I call you Mr Dibble, I don't miss the first time, you won't have this Hide, I am coming for you.
The Paw.

 

[Muttt]

Re: SHWW Group

I moved behind Bangor on Olympic View.

We try for next week. Let me know what's a good day/time. This will give me more time to finish my reloading bench and load up some ammo.

 

[1911fan]

Re: SHWW Group

I'm selling a Blackhawk OD Green drag bag, lightly used, $125; and a Gun Guard hard case, 51X13", $100. Don't want to ship them but they'll be at the match Sunday.
Buy both for $200.



1911fan

 

[DIBBS]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The Paw</div><div class="ubbcode-body">Dibbs or can I call you Mr Dibble, I don't miss the first time, you won't have this Hide, I am coming for you.
The Paw.

</div></div>

<span style="font-family: 'Comic Sans MS'"> <span style="font-weight: bold"> Now that's funny, I don't care who or whom you are!

</span> </span>

 

[Tribe]

Re: SHWW Group

Mr Dibble.... Seems we've met your nemesis!

 

[ranger1183]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The Paw</div><div class="ubbcode-body">Dibbs or can I call you Mr Dibble, I don't miss the first time, you won't have this Hide, I am coming for you.
The Paw.

</div></div>
Sour Puss!

http://www.snipershide.com/forum/ubbthreads.php?ubb=showprofile&User=67450&#comment=1764

 

[oltmann]

Re: SHWW Group

Hey all. Just doing some reloading for my new .260 rem.

I just realized that the basic RCBS seater is giving me slightly worse than unacceptable runout. The bullets shape just doesn't line up with the seater cup.

I tried modifying the shape of the seater without good results. I'm going to call RCBS in the morning.

Does anyone have a favorite seating die that won't break the bank?

 

[mkollman74]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: oltmann</div><div class="ubbcode-body">Hey all. Just doing some reloading for my new .260 rem.

I just realized that the basic RCBS seater is giving me slightly worse than unacceptable runout. The bullets shape just doesn't line up with the seater cup.

I tried modifying the shape of the seater without good results. I'm going to call RCBS in the morning.

Does anyone have a favorite seating die that won't break the bank? </div></div>

Forster.

 

[Rover31]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: oltmann</div><div class="ubbcode-body">Hey all. Just doing some reloading for my new .260 rem.

I just realized that the basic RCBS seater is giving me slightly worse than unacceptable runout. The bullets shape just doesn't line up with the seater cup.

I tried modifying the shape of the seater without good results. I'm going to call RCBS in the morning.

Does anyone have a favorite seating die that won't break the bank? </div></div>

Wilson.

 

[Alan_H]

Re: SHWW Group

+1 for wilson

 

[oltmann]

Re: SHWW Group

Thanks guys.

I'll be ordering a set from midway today.

After checking my sized brass this morning, I see the runout problem is starting there. Never had a problem with my .308 rcbs dies, but this .260 set is not right.

 

[blurry6]

Re: SHWW Group

Really hard to beat the Redding Competition dies,... especially the 3-die (S-Type) set that includes a BODY DIE for bumping the shoulder, a NECK DIE that allow you to insert neck-bushings for total control of the amount of tension and the depth of neck sizing, and a SEAT DIE that has a micrometer top for total control of the seating depth. They're pricey, but are REALLY nice to have.

 

[DIBBS]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tribe</div><div class="ubbcode-body">Mr Dibble.... Seems we've met your nemesis!

</div></div> <span style="font-family: 'Comic Sans MS'"> I reckon so...</span> <span style="font-size: 14pt"> </span> Perhaps my days of harassing predators and being <span style="font-style: italic">"somewhat"

</span>of a smartass are numbered. I'm scart!

 

[SScott]

Re: SHWW Group

Guys, I have a few bags made up and will bring them to Wenatchee on Sunday if any one needs one. PM me if you want to call dibs on one.
Yes, MM509 I got yours finished, and it has everything but a cup holder.
Thanks SScott

 

[mjh30]

Re: SHWW Group

Craig, looks like you better practice with that 223 of yours, in case The Paw shows up. On a side note, Scott your bags worked really good, not sure if I ever mentioned it to you.

 

[Mayday]

Re: SHWW Group

Whoops ment to PM that.

 

[SScott]

Re: SHWW Group

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mjh</div><div class="ubbcode-body">Craig, looks like you better practice with that 223 of yours, in case The Paw shows up. On a side note, Scott your bags worked really good, not sure if I ever mentioned it to you. </div></div>
Thanks, I have had real good luck with them, I have version 2 out now, it has a fill port in it.
See you all Sunday
SScott

 

[JC Steel]

Re: SHWW Group


****T-POST BRACKET UPDATE****

Hey guys, well we have two designs we are working with right now. And I must say I am very happy with what I am seeing. I got to test them both out thursday. I hit them each 20 times at 50 yards with my 308. They worked great!!!!


One of the t post brackets is a piece of 10 gage angle iron. I am butting a custom rectangular piece of 10 gage tubing to the back side. Drilling holes, mounting the plate and hanging it on the t post. It does not spin, holds nice and tight.

They are fairly light weight which is a awesome thing! and they see no abuse because there is a AR500 steel target in front which takes all the impact.

The other design, which I might end up going with, is the same 10 gage angle iron, and I am butting up a custom piece of 10 gage steel angle iron with a 52.5 degree angle. This allow it to slide right over the T post for a super fit. again wont spin and creates a very nice fit with standard medium duty T posts.

I will have some for purchase next week.

I will post some pictures and ask for some advice come early next week. Stay tuned.

I am thinking roughly 7-8 will fit into one flat rate box.

 

[Alan_H]

Re: SHWW Group

are these all one hole spacing or custom hole spacing?

 

[JC Steel]

Re: SHWW Group

Any hole spacing you guys want can be done.

 

[Tribe]

Re: SHWW Group

Sweet... ....Pictures!