Sidearms & Scatterguns Sig P226 Grip Screws/Bushings

[remau308]

One of my Sig's grip screws has backed out and is lost. It also had some type of grip bushing, but I can't find one anywhere. Here is a picture of what I'm talking about. I believe the hex head screws are made by Hogue, but the bushings elude me. Can someone please point me in the right direction?

Any help is appreciated,
Troy

 

[remau308]

Re: Sig P226 Grip Screws/Bushings

Anyone?

 

[SmokyJoe]

Re: Sig P226 Grip Screws/Bushings

The bushing is actually an internal tooth lock washer, available at a hardware store or big box Depot/Lowes. With my Nill grips, and the original plastic Sig grips, lock washers were not included. I use blue Loctite on the threads to make sure the screws won't back out.

If you don't use a lock washer, you'll need to make sure the screw does not go through the frame to the point where it will interfere with the magazine.