Calling all SIMRAD mounting experts !!!
==
So I have two SIMRADs a pvs-9 and a 9a (aka a kn203 and a kn253) and both of the thingies on the rear end of the SIMRADs that mount on to the thingie that is on top of the scope mount are the same. You open a latch, and press on a button on the very rear of the SIMRAD and slide the SIMRAD over the (US) SIMRAD "cap" on the scope, then release the button, then tighten the latch and the SIMRAD is mounted (and during the process jiggle it a little to make sure it is seated).
My buddy bought a kn203 ... but the rear end of his simrad is different.
He came out here last weekend and we couldn't fit it over the US SIMRAD "cap" thingie. The channel is too narrow and there is a strange "protrusion" on the left side of the rear end of his simrad (per the pic above).
He called MHSS and they sent him the nada US "cap" thingie, but same problem.
==
So I have two SIMRADs a pvs-9 and a 9a (aka a kn203 and a kn253) and both of the thingies on the rear end of the SIMRADs that mount on to the thingie that is on top of the scope mount are the same. You open a latch, and press on a button on the very rear of the SIMRAD and slide the SIMRAD over the (US) SIMRAD "cap" on the scope, then release the button, then tighten the latch and the SIMRAD is mounted (and during the process jiggle it a little to make sure it is seated).
My buddy bought a kn203 ... but the rear end of his simrad is different.
He came out here last weekend and we couldn't fit it over the US SIMRAD "cap" thingie. The channel is too narrow and there is a strange "protrusion" on the left side of the rear end of his simrad (per the pic above).
He called MHSS and they sent him the nada US "cap" thingie, but same problem.
Last edited: