Rifle Scopes Small level for mounting scope

[Maelstrom]

I am looking for suggestions for a small bubble level I can use when mounting a scope. I am trying to mount a scope on an AR using a cantilever mount. Usually I would use feeler gauges and a couple levels as I have with my bolt guns but the cantilever mount prevents me from putting anything under it. The handguard is a round one with no top rail so I can't place a level on that either. I just want a small or thin level I can put under the eyepiece of the scope on the top of the receiver. Once I get the rifle level I will verify everything with a plum Bob.

 

[natdscott]

Starrett makes what you need. Brownell'a (etc.) have it.

 

[Dthomas3523]

Not sure if you have room for this:

https://arisakadefense.com/products/optic-leveler

 

[pineoak]

these work?

https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=bubble+level

 

[jacer961]

Lowes has a small level that goes on a string, it's hex so it has sides that sit flat,about 1 1/2 long and a little smaller than 1/2 inch, hope this helps, works for me.

 

[mkollman74]

Lowes has a small level that goes on a string, it's hex so it has sides that sit flat,about 1 1/2 long and a little smaller than 1/2 inch, hope this helps, works for me.

I use these as well.

 

[rd_kng]

Check out the Wheeler Scope Leveling Tool.

 

[Maelstrom]

I don't think the Arisaka will work but I will look for the one at Lowe's. Of it won't work I will order the ones from Amazon.

 

[jacer961]

I don't think the Arisaka will work but I will look for the one at Lowe's. Of it won't work I will order the ones from Amazon.

There called Swanson surface level or string level, $1.91

 

[BigUn]

These mk machining rail mounted levels are awesome, plus it’s a field usable item not just a shop tool, the aluminum ones are ~$55 (highly recommend). They also make a printed version that’s like $20 which are ok at best ( not recommended)

https://mkmachining.com/product/preorder-aluminum-rail-mounted-level/