Suppressors Specwar Owners, I have a question

[Grason]

I picked up my Specwar762 last Friday, I noticed after I got it, one set of teeth engage the flash hider and the other side is slightly out of line. Is this common? or are both supposed to engage the mount? I got my other Brake today and it does the same thing, so I can eliminate the flash hider as the problem. The lock ring is kinda hard to turn, and I just don't want to break anything before I really get to use it.


Any help would be great.


Thanks,
Grason

 

[Donr13]

Try twisting it to the lock position, perhaps it only engages at that point, if this does not work i will open the safe and check mine. I am a bit lazy at the moment.

 

[charger23]

Take something with a rounded head and use it to pry open the loop or thin needle nose and open the loop (bend the hook outward toward the wall of the locking ring) it will engage better. You want resistance when you turn the locking ring. Not so much it's a fight, but some resistance. I had to do this on one of the specwars I picked up in order to get it to lock up to my liking.


"Peace is that brief glorious moment in history, when everybody stands around reloading"

-- Unknown

 

[Grason]

Try twisting it to the lock position, perhaps it only engages at that point, if this does not work i will open the safe and check mine. I am a bit lazy at the moment.

This is in the locked position, one side is engaged, the other side is not.

 

[Grason]

Take something with a rounded head and use it to pry open the loop or thin needle nose and open the loop (bend the hook outward toward the wall of the locking ring) it will engage better. You want resistance when you turn the locking ring. Not so much it's a fight, but some resistance. I had to do this on one of the specwars I picked up in order to get it to lock up to my liking.


"Peace is that brief glorious moment in history, when everybody stands around reloading"

-- Unknown

Roger that, I will give it a shot.


Thanks,
Grason